The left pedal of the bike is unscrewed in which direction

Pedal design

This part of the bike is divided into several parts:

  • Platform. The flat part. It is she who directly contacts the leg. The platform is attached to the axle.
  • The axle is a metal pin that is screwed into the connecting rod. The axis is the basis on which the rest of the structure rests.
  • Bearings. parts that ensure the rotation of the pedals, as well as connect the platform to the axle.
  • Fittings. fixing parts (bolts, nuts). They attach and hold composite parts.

By the type of platforms, there are regular and contact ones. The latter are equipped with a bicycle shoe holder. The contact platform will be more difficult to remove due to a different installation scheme.

Pedal design

They are not all the same and you need to know a little about their construction. So, the pedal is part of a system that includes a set of sprockets, a crank carriage and, in fact, a set of axles, platforms, bearings and accessories. on this below.

Structurally, a bicycle pedal consists of several parts:

  • The axle is a metal pin that is screwed into the connecting rod. Provides the basis for the rest of the structure.
  • Platform. a plane that contacts the foot and is fixed on the axis.
  • Bearings. the assembly that connects the axle and platform, allowing rotation.
  • Fittings. bolts and nuts that fix all the components of the pedal. Unscrewed during disassembly.

On the platform, the pedals are divided into contact (with fastening for special shoes) and ordinary. The method of removal depends on the type: for contact mechanisms, the fastening scheme is a little more complicated. Combined options, combining, on the one hand, an ordinary platform, and on the other, a contact device, are no different in terms of dismantling from contact.

How to put bike pedals back in place?

Before installing these parts on your bike, it is advisable to check for grease on them. In the absence of such, it is advised to lubricate the threads. This will both protect against corrosion and facilitate future removal.

They use waterproof lubricants. For example, lithol, as well as grease. A competent installation involves cleaning from dirt and removing the previous grease on the threads with a degreaser (degreasing agent).

Professionals recommend that you carry out the installation process by hand. It is imperative to screw in perpendicular to the axis. This action must be performed as carefully as possible to avoid damage to the thread. Since during the subsequent unscrewing, a serious problem may appear. In a word, axle skew must not be allowed.

Arming has the same algorithm as disarming, but in reverse order. And the twist is already happening in the other direction. A hex wrench will help you to screw in if there is a slot on the side, designed for a hexagon.

But there is one drawback of using such a key. it is impossible to give them a fairly strong load and screw in all the way. Due to this fact, it is good to tighten first with a hex wrench, then tighten finally with an open-end.

Which way the left bicycle pedal is unscrewed

left, pedal, bike, unscrewed, which, direction

Despite the fact that the pedal is considered to be a very simple part, it can only be removed from the bike with a certain amount of knowledge. Replacing the pedal is necessary in the following cases:

  • If it is damaged.
  • If it is necessary to lubricate this element.
  • To replace the connecting rod or repair it.

To understand the whole essence of the process of replacing pedals, you need to understand their design, what types they are divided into. It is advisable to have some features of Honor and prepare the accompanying dismantling tools.

READ  How Fast To Ride A Bike

Removing the pedals

After preparation, you can proceed to the removal process. For conventional mechanisms, it looks like this:

  • We move the system to the working side. in the direction of the steering wheel.
  • We try to carefully unscrew the pedals from the connecting rod.
  • Remove the plug at the end of the platform, open the lock nut.
  • Unscrew the lock nut, holding the axle at the connecting rod with the second key.
  • Remove the washer (also at the end).
  • Unscrew the cone.
  • We remove the platform from the axle, holding the bearings (it is better to remove them separately, if they are bulk, then put a rag or sheet so that they do not roll far).
  • Pedal removed and disassembled!

It is important not to forget that the left and right pedals are unscrewed from the connecting rod in their direction: on the right axis. the right thread, on the left. the left.

Contact devices are a little more difficult to disassemble, but they will not cause any problems. when twisting and disassembling, a puller is used, which should hold the axis with a small contact pad.

How to unscrew the pedals on a bicycle. step by step instructions

Dismantling bike parts has its own algorithm. Transport should be put on wheels. This will make it easier to unscrew the parts. less effort is required.

  • The process begins by removing the right pedal. The connecting rod is set at 45 degrees, the so-called 3 o’clock (for the left one. a turn at 9 o’clock is provided). In this case, the connecting rod should be parallel to the ground and “look” at the front wheel.
  • Unscrew the part counterclockwise (left. in the opposite direction). This pedal has a regular thread. Remove pedal.
  • Remove the plug on the side of the platform.
  • Open the locknut, unscrew it (the axis must be held with the second key).
  • Remove the washer, and then the platform.
  • The bearings are removed separately. It will be advisable to put a newspaper or cloth under them in order to prevent the loss of balls if the bearing is assembled.

How to put a pedal on a bike.

  • Check the threads for grease before installing the pedal. If not, it is better to apply a layer of lubricant to the threads. So you will protect it from corrosion, from “sticking” to the connecting rod and make your life easier in the future. it will be easier to remove later. You can use lithol, grease and other waterproof lubricants.

Degreaser (degreaser) is a special degreasing compound designed to remove dirt, grease, oil.

Pedal Tools & Thread Direction

  • It is best to begin to twist the pedal with your hands, strictly perpendicular to the connecting rod axis. This is the least likely to damage the thread when the axis is misaligned.
  • All actions during setting are similar to removal, only they need to be twisted in the other direction, compared to unscrewing.
  • If there is a slot for a hexagon wrench at the end of the pedal axis, then it can be screwed in with a hexagon. The minus of the hexagon is that it will not be possible to give a strong load on it and screw the pedal well. Therefore, it is best to tighten it first with a hexagon, and then finally tighten it well with an open-end wrench.
  • It is necessary to twist the axle into the connecting rod strongly, but without fanaticism. It is very difficult to break the thread there, but it will be difficult to untwist the fanatically tightened thread.
  • After installation, remove any excess grease that has formed around the connecting rod connection. So dirt and dust will not accumulate in this place.
  • Training

    You will need a pedal wrench to remove the bike pedals. The pedal wrench has a thin jaw designed for use on narrow pedal axles and a long handle to provide good leverage.If you do not have a bike stand, turn the bike over so that it rests on the saddle and handlebars.

    The most important thing you need to know about pedals is that the threads on the left and right sides are different. The pedal on the drive side has a right-hand thread. the usual one that needs to be turned clockwise to tighten, but the left side has a left-hand thread so tightens counterclockwise Your fingers are probably so used to right-hand threads that you will often make mistakes, but with in time it will become a habit.

    READ  How To Remove A Camera From A Bicycle Wheel

    The left pedal has a left-hand thread, because otherwise it would unscrew while driving.

    How to remove and re-install the pedals on a bicycle. Features and nuances.

    A situation has arisen that it is necessary to unscrew the pedals from the bike, but you do not know how to do it correctly. Let’s take a look at how to perform this operation quickly and easily.

    How to remove the pedals

    • This is best done with the bike on wheels. Why? The fact is that sometimes it takes quite a lot of effort to unscrew it and you have to use the whole body weight. It is easier to do this while the bike is standing on its wheels than when it is hanging from a rack.
    • Remove the right pedal. To do this, it is best to put the right crank at the 3 o’clock position: the crank is horizontal to the ground and turned towards the front wheel. Given that the right pedal has a normal thread, we unscrew it like a normal thread. counterclockwise.
    • Then remove the left pedal. We put the left crank in the 9 o’clock position. It is again horizontal to the ground and angled towards the front wheel. Remember that there is a left-hand thread on the left pedal and unscrew it clockwise.

    Threading and Removing the Pedal Thread

    This is the tricky part. The pedal thread on the transmission side is normal, but the left pedal is opposite. This means you need to turn the key counterclockwise to loosen and remove the right pedal, and clockwise to remove the left pedal.

    How To Change Pedals. Remove And Replace Your Bicycle Pedals

    When you may need to remove bike pedals

    • For maintenance. For example, a crunch or creak appeared and you need to clean and lubricate them.
    • When replacing old pedals with new ones, or replacing connecting rods.
    • When packing the bike in a cover or to reduce the space occupied when transporting it.
    • When preparing your bike for long-term winter storage. Again to minimize bike space
    • As an anti-theft agent. The method is very effective. well, where will you go on such a bike. The trick here is that they should be removed easily and simply. The tool for this and a small bag in which the removed pedals will be folded should always be with you in your bike bag. You will not wear them all the time in your hands.

    The peculiarity of the pedals is that they have symmetrical threads.

    Each of them must have a label: which is left and which is right. Usually these are the English letters L. Left (left) and R –Right (right), respectively, for the left and right pedals.

    The left pedal is always made with a left hand thread. This means that it twists counterclockwise and unscrews clockwise.

    On the right, there is a regular right-hand thread. Twists clockwise and unscrews counterclockwise.

    This is done so that when the pedals are spinning while the bike is moving, they do not unscrew.

    It is easier to remember the rule: the pedals are unscrewed against the direction of the bicycle’s movement. twist to the rear wheel, and twist in the direction of travel. twist to the front wheel.

    Removing the pedals

    After preparation, you can proceed to the removal process. For conventional mechanisms, it looks like this:

    • We move the system to the working side. in the direction of the steering wheel.
    • We try to carefully unscrew the pedals from the connecting rod.
    • Remove the plug at the end of the platform, open the lock nut.
    • Unscrew the lock nut, holding the axle at the connecting rod with the second key.
    • Remove the washer (also at the end).
    • Unscrew the cone.
    • We remove the platform from the axle, holding the bearings (it is better to remove them separately, if they are bulk, then put a rag or sheet so that they do not roll far).
    • Pedal removed and disassembled!

    It is important not to forget that the left and right pedals are unscrewed from the connecting rod in their direction: on the right axis. the right thread, on the left. the left.

    Contact devices are a little more difficult to disassemble, but they will not cause any problems. when twisting and disassembling, a puller is used, which should hold the axis with a small contact pad.

    READ  Adjust the speed switch on the stern bike

    Removing the pedals from the bike is easy enough, but don’t forget about preparing tools and materials, as well as possible problems. The main thing is to keep the entire system in order, since in case of damage or other problems, the inconvenience of using the bike will be very great.

    Despite the fact that the pedal is considered to be a very simple part, it can only be removed from the bike with a certain amount of knowledge. Replacing the pedal is necessary in the following cases:

    • If it is damaged.
    • If it is necessary to lubricate this element.
    • To replace the connecting rod or repair it.

    To understand the whole essence of the process of replacing pedals, you need to understand their design, what types they are divided into. It is advisable to have some features of Honor and prepare the accompanying dismantling tools.

    What tool are pedals removed

    • Open-end wrench 15 mm
    • Various universal bicycle wrenches that have a 15mm wrench.
    • Adjustable wrench.
    • Some models are removable and reattached with 6/8/10 mm hex keys
    • There are special pedal wrenches that combine 15 open-end wrenches and hex wrenches in one tool.

    When using an adjustable wrench, be sure to pay attention to its thickness. The fact is that the distance between the pedal mount and the connecting rod is not large, and not every adjustable wrench will fit there. Some types of wrenches come with thin jaws that can be used. Open-end or special pedal keys are great for this operation.

    Summary

    The process of dismantling the pedal is, of course, simple. However, the preparation of inventory and materials should not be neglected. Consideration should also be given to the occurrence of anticipated problems. Accent is highly recommended to keep the entire system up and running. Following the above recommendations will avoid unnecessary consequences.

    Threaded pedals

    Required tools and materials

    Before removing the pedals, it is necessary to prepare the tool and auxiliary materials that are most likely to be needed.

    • lubrication. it is recommended to clean and lubricate the removed parts;
    • cleaning rags;
    • kerosene or solvent. in case the axles do not unscrew or there are large contaminated areas.

    How to put a pedal on a bike.

    • Check the threads for grease before installing the pedal. If not, it is better to apply a layer of lubricant to the threads. So you will protect it from corrosion, from “sticking” to the connecting rod and make your life easier in the future. it will be easier to remove later. You can use lithol, grease and other waterproof lubricants.

    By the way, before starting the installation process, it would be very good to clean from old grease and dirt with a degreaser not only the thread on the pedal axis, but also the thread in the connecting rods.

    Degreaser (degreaser) is a special degreasing compound designed to remove dirt, grease, oil.

  • It is best to begin to twist the pedal with your hands, strictly perpendicular to the connecting rod axis. This is the least likely to damage the thread when the axis is misaligned.
  • All actions during setting are similar to removal, only they need to be twisted in the other direction, compared to unscrewing.
  • If there is a slot for a hexagon wrench at the end of the pedal axis, then it can be screwed in with a hexagon. The minus of the hexagon is that it will not be possible to give a strong load on it and screw the pedal well. Therefore, it is best to tighten it first with a hexagon, and then finally tighten it well with an open-end wrench.
  • It is necessary to twist the axle into the connecting rod strongly, but without fanaticism. It is very difficult to break the thread there, but it will be difficult to untwist the fanatically tightened thread.
  • After installation, remove any excess grease that has formed around the connecting rod connection. So dirt and dust will not accumulate in this place.
  • Variety of pedals

    Depending on the platform, the pedals are divided into: