How to store cycling cameras. Four examples of how you destroy your bike cameras
Store your tire tubes properly to avoid punctures or other damage
A spare camera in your saddle bag can literally save your life on a long trip. It would be very unpleasant if, after replacing the punctured camera with a new one, you found that it was no longer good for anything.?
Make sure spare cameras are ready to use when you need them, avoiding these common mistakes.
Wolf Tooth EnCase System. Handlebar Tool Storage
You may be lucky to have successfully avoided punctures for a long time. In this case, you will probably need to replace the spare parts in your bag.
Prolonged storage of chambers in the saddle bag can cause cracks in the folds.
In addition, the cameras can be damaged if they constantly rub against other objects in the bag. Therefore, you sometimes need to take out the cameras to avoid such problems.
If in doubt about the integrity of the cameras, inflate and look for damage.
This storage option is chosen when it is impractical to disassemble the bike, in addition, the model is awkward. There is a large selection of different attachments on the market for efficient bike attachment.
During storage, the bike is placed in one of the ways.
This is the simplest way, where the bike stands on a wheel stand. This design is small and allows you to use the bike at any time.
There are floor structures on which several bicycles are located at the same time. It is convenient for a large family, where there are adults and children bicycles.
There are models of bicycles with a folding frame, pedals and handlebars. The foldable bike is convenient to store on the balcony of a small area. It easily fits in a closet or hangs on the wall. It takes no more than 15 seconds to change the state of such a model.
Is it possible to store the bike on the balcony in the summer. How to store your bike on the balcony
Storing your bike on the balcony is not the best way. However, in some situations you cannot do without it, especially when there is no free space. Finding the vehicle on the balcony must be safe for the entire mechanism. To this end, it is necessary to choose the right mount, prepare the bike for wintering and study the main features of staying in cold conditions. Details provided by experienced experts.
Using rubber bands for compact storage of cameras
Over time, the rubber bands can react with the rubber of the chambers and cause holes to appear. The elastic can even blend in with the camera. In this case, trying to remove it will lead to gaps.
Storing cameras near a heat source
Heat spoils the rubber, making it brittle and less elastic. If you have cameras that you do not intend to use for a very long time, keep them away from direct sunlight and other sources of heat.
The hydraulic brakes are cold resistant. They are filled with non-freezing liquid, which is not afraid of low temperatures. You shouldn’t worry about the condition of the brake discs either, especially since you should never apply lubricant to them.
V-breaks are ready for winter in a matter of seconds. you just need to unbuckle the mount above the wheel to loosen the tension on the cables.
How to store a bike in an apartment. suspension devices
If floor space permits, hanging the bike is ideal. In this case, you do not have to worry about the pressure in the tires, and it will take up little space. Suspension options include vertical and horizontal storage. In this case, you do not have to dismantle individual elements to remove wheels.
The simplest mount can be used not only in winter, but also in summer. It is a hook under the frame located at the waist level. Allows you to stably position the vehicle at a low height. The pluses include the ease with which you can get it. By cons. the need for a large space.
Recently, a rope suspension system has appeared. The handlebars and saddle are hooked and the bike is pulled up to the ceiling.
Extreme DIYers have come up with a more compact way of suspension, in which the bike literally “lies” on the ceiling, without occupying the usable area of the room and without interfering with movement.
Proper washing before winter
Amateurs who think about how storing a bike in winter will affect its technical condition in the new season, often just oil the chain and send it to the balcony. It is not recommended to do this, as the grease will “cement” the dirt, which will cause a lot of trouble during operation.
The first step is to thoroughly wash your bike. But at the same time, it is not recommended to go to a car wash, as water under high pressure penetrates into the bushings and the carriage, literally pushing grains of sand there. While heavy grease from the factory will protect against rust, each grain of sand will serve as an abrasive. Therefore, it is best to wash the bike by hand, in the bathroom or near the house.
Use your usual kitchen detergent to remove old grease. The washing sequence is as follows:
- with a gentle stream of water, the top layer of dirt is removed;
- stagnant lumps are soaked in hard-to-reach places;
- an initial wash is carried out with a brush;
- a sponge with detergent removes a layer of fat;
- the bike is rinsed with a jet of water.
When washing, it is necessary to periodically rinse the sponge so that the sand does not scratch the paintwork. Do not apply lubricant immediately after washing, the bike should dry for a couple of hours. This rule does not apply in summer, as during operation moisture will be forced out.
How and where to store your bike in winter
Both the owner of a road bike and a simple bike enthusiast who bought an inexpensive model for rare trips think about how to store a bike in winter. The problem of storing two-wheeled vehicles worries everyone who has a bicycle. Even the presence of a warm garage, the perfect place to wait out the winter, forces the owner to solve some problems.
Choosing a storage location
So, if the question is, where is it better to store the bike, and there are several possible answers, then the choice should go in the following sequence:
- warm dry garage;
- glazed loggia;
- cold garage;
- open balcony.
Now bike shops offer winter storage services, which is also a good option. Not only optimal conditions are provided there, here the craftsmen will prepare the bike for the new season.
A place where in no case should you leave transport is an entrance or a staircase. Even the most reliable chain will not withstand attack by intruders. The bike lock takes a bite in a few seconds, and a seemingly reliable lock won’t last more than a minute.
Before conservation, leather saddles are lubricated with a small amount of oil or a special composition based on beeswax. over, lubrication must be carried out both from the outside and from the inside. But imitation leather and plastic does not require maintenance.
Do not heed the advice “lightly grease the entire surface of the frame with an oil rag.” For carbon, this recommendation is meaningless, the iron remains under the paintwork. If we take aluminum structures, then everything is even simpler. For example, the Titan Bike is made from 6061 aluminum, which is used in aircraft construction. Has anyone seen a painted plane? On contact with air, aluminum creates the finest oxide film that protects against oxidation.
Choosing a storage location
The first step is to decide where your bike will be stored during the winter. The ideal storage option is a dry room without sudden temperature changes. It can be an apartment or a vestibule (a platform for several apartments behind a separate door). At the same time, please note that the bike should not stand close to heaters. this negatively affects the paintwork and plastic parts.
2 Bike Handlebars (Space Saving) Invention Ideas
Another option is on a glazed loggia (balcony). In this case, it is enough to protect the bike from direct sunlight by covering it with a thick cloth, opaque film or something similar.
It is highly discouraged to leave the bike “for the winter” on an unglazed loggia (balcony), since in this case it will be negatively affected by high air humidity, precipitation in the form of rain and snow, as well as sudden temperature changes.
Wash, dry, grease
Before you “mothball” the bike for the winter, it must be cleaned of dirt. This is important because urban dirt contains aggressive constituents. So the first step is to thoroughly wash your bike and let it dry (or wipe it dry). The chain must first be cleaned of old grease, dried, and then greased again. for this, a special grease is used. Gear shifters, brake pivots and rear derailleur rollers should be lubricated with oil such as lithium. We advise you to wipe the clean frame with a soft cloth soaked in machine oil (just drop a few drops). After this treatment, a thin protective film is formed on the frame, due to which dust will not adhere. To protect tires from cracking, they need to be treated with a special silicone spray.
Preparing your bike for winter storage
The overwhelming majority of bicycle owners use them only in good warm weather. in spring, summer and quite a bit in autumn. Winter is a season for courageous cyclists (whose number, however, increases every year). If you have not yet joined this series, the answers to the questions “Where to store a bicycle in winter and how to prepare it for winter storage?” will be very relevant. If winter is for you. not a hindrance, then the features of preparation and cycling in winter will be useful to you.
Weaken the tense nodes
If you do not want to face the problem of rusty derailleur springs in the spring, then make sure that all tense parts of the bike “rest” in winter. were in a weakened state. The V-Brake must be released. The chain must be shifted to the smallest sprockets so that gear is set to 1-7 for a 21-speed bike (or 1-8 for a 24-speed bike).
We take out the batteries
When storing your bike for a long time, especially in the event of temperature extremes, remove the batteries from the headlight, taillight and bike computer. Otherwise, not only the batteries may oxidize, but also the contacts in the devices themselves, which will render them unusable.
“Folding” the bike
After you have completely prepared the bike for winter storage and decided where and in what condition it will be stored, you may find that it will interfere with you and its “parking” will take up a lot of space. In this case, even a non-folding bike can be partially “folded”. For example, you can turn the steering wheel 90 degrees (so that it becomes parallel to the frame) by first loosening the nuts and removing the front wheel. You can also install the pedals “inward”. turning them out of the rods and wrapping them from the inside. In addition, the saddle should be lowered or removed to save space. As such, your bike will take up significantly less space.
Criteria for choosing a place to store your bike
We figured out the method of preparing for storage, let’s talk about choosing a storage location. At a minimum, you have a storage room in the house, a balcony, or a garage. When choosing where to put your bike for the winter, you need to take into account that not only temperature and humidity changes affect your bike.
Any temperature rises after prolonged cooling will cause mechanical stress in the parts. Bicycle accessories are made of a combination of different materials that expand differently when the temperature changes. First of all, paint and chrome coatings crack. Plastic and rubber that are not protected by grease become overgrown with microcracks. The cold parts of the bike become covered with condensation from the warm air. Subsequently, the pores are filled with freezing moisture and enlarged. Sunlight or fluorescent lights make plastic parts brittle and discolor paintwork.
In general, if you have the opportunity to change your bike often, then it’s okay if your old one is stored on an unglazed balcony or in a garage near sacks of potatoes. To enhance the effect, some owners hang the bike outside the balcony under the rays of the winter sun in spite of all the winds and snows.
How to store your bike in winter?
Since the end of October in Kiev, the air temperature has been around zero. Dampness and slush on the streets, strong wind with the first snow please only fans of extreme sports. For an ordinary cyclist, it is not enough pleasant in late autumn. The overwhelming majority use a bicycle only before the onset of cold weather and do not remember about it until next spring. However, proper storage of the bike in the off-season does not mean leaving the bike on the balcony or throwing it into the far corner of the garage, just not to interfere.
It is understood that the reader of this article, the owner of the bicycle, is a conscious and responsible person. He uses his transport correctly and expects to open the season next year with pleasant impressions and without unnecessary investments. By applying our recommendations, you will be able to prepare for your winter parking. Having done the preservation correctly, you can leave the bike until spring without worrying about its condition. The most important thing is to follow the method of preparation for storage, the choice of storage location is not so critical.
Where to start storage?
Any preservation starts with washing. First, use a soft brush to remove dirt from bushings, brake levers and derailleurs. We wash off all the stains of leaked grease, wipe the stained parts with a clean rag. We wash the bicycle transmission from grease using available solvents: kerosene, acetone, white spirit or a special detergent. We carefully make sure that the detergent does not get on plastic or painted parts, for this it is better to spray it, and not pour it on a rag.
After washing, you should inspect the parts for damage, wear. Now is the time to replace worn out or adjust loose mechanisms. In the spring, you can forget what and where creaked or did not work.
The lubricant is always changed to fresh before putting it in storage. Once a year, it is necessary to completely clean the carriage, wheel bushings, pedals, steering column from grease and apply clean grease. The previously washed chain, switches, switch cables and brake cables are also lubricated. If the storage room is not heated, then at least all chrome-plated surfaces, and preferably the entire frame, are protected with a silicone-based lubricant. Thus, you prevent the spread of corrosion and surface cracking of rubber and painted parts.
All spring mechanisms are stored unloaded. The switches need to set the chain to the so-called “forbidden” position, when it connects the smallest drive and driven stars. Vibrators and cantilever brakes can be decoupled to relieve stress on the opening springs.
The pressure in the chambers decreases during storage. It is enough to leave 1-1.5 atmospheres. There is no need to bleed air to zero, even if the bike will be stored in a suspended state. The pressure inside the tube prevents the tire from deforming, therefore, in case of large temperature differences in the storage area, periodically check the pressure level. If you have expensive tires, it is also a good idea to coat the inside of the tire with glycerin and lubricate the top of the tread. So you will be insured against rubber cracking in the cold.
All electronics on the bike are removed and de-energized. It is better to store your bike computer or navigator separately in a heated room to avoid damage to the display from low temperatures. All batteries from devices and flashlights must be removed and also stored separately at a positive temperature.
The fastenings on the carbon parts must be loosened. This applies in particular to stem and seatpost clamps.
How to store your bike if there are no suitable storage conditions?
A closed balcony is a good storage space, but even here the bike needs to be protected from sunlight by covering it with an opaque cloth or film and making sure that no water gets on it.
It’s a good idea to leave your bike for the winter in a garage or shed, but never in a cellar or viewing pit. In a damp basement, no lubricant will protect you from rust.
The best storage solution in your garage is to hang your bike on the wall. The mount can be made from plastic or wood yourself, this will protect the frame from scratches. You need to hang it by the frame, but not by the steering wheel and saddle or wheels.
The apartment remains the ideal place to store a bike, but there is rarely enough space in the apartment. Your wife may protest against the smell of grease and rubber in the room, or you may be worried that your pets will accidentally scratch your pet. Also, placing near a battery or in a warm place is harmful to oil seals and tires. Some find a way out by partially disassembling the bike, in order to then shove it behind a closet or under a bed. Not the worst option, by the way.
For those who do not like to get their hands dirty too much, it will be enough to twist the pedals on the inner side of the connecting rods or remove them, turn the steering wheel parallel to the frame and dismantle the front wheel along with the guard. The saddle and seatpost are also best removed. It is not necessary to lower the saddle to a minimum, the seat post is tight anyway, and you will inevitably scratch it. You may need to unscrew the rear wheel as well. In this case, you must additionally remove the chain from the frame. The chain must be stored in a separate bag, box or jar with a lid. It is advisable to place a partially disassembled bicycle in a cover or wrap it with foil or paper, so as not to fiddle with dusting in the spring.
Summing up bike storage
What you need to do before winter parking:
Diagnostics, replacement of worn parts, adjustment of mechanisms, replacement of grease with a new one.
We remove mechanical loads from all parts of the bike, weaken all fasteners and springs.
Protecting bike surfaces with preservative lubricant.
We cover the bike with an opaque material from dust and sunlight or place it in a case.
We store only in a dry place, preferably at positive temperatures or without sudden temperature changes.
As you can see, for an ordinary cyclist, preparation for winter storage is quite laborious and requires at least a couple of hours plus additional costs for arranging the storage space, preservatives and detergents and materials. In terms of comfort, it remains only to envy the residents of large cities, where there are special workshops and heated boxes for winter storage of client bicycles.
We have covered all aspects of winter bike storage. Tips are applicable to all responsible owners, except for those who like extreme rides on ice and snow and carefree people who have the opportunity not to pay attention to the condition of their bike.
Features and ways to store a bike on the balcony
Nowadays, when sports and a healthy lifestyle are in vogue, more and more people are thinking about purchasing a bicycle. However, if we are talking about a city apartment, there may be inconveniences with its storage. One of the best places for this is the balcony.
If a decision has been made to store the bike on the balcony, care must be taken to ensure that basic space requirements are met. There are not too many of them. The unit must be freely accessible. The room temperature should not be lower than 5 degrees. In addition, you need to ensure that direct sunlight cannot get on the bike, otherwise the coating, plastic and rubber elements will quickly become unusable.
Turning your bike handlebars for storage
If the temperature on the balcony is too low, the structure will quickly break. In addition, it is impossible to allow the location of heating devices in the immediate vicinity, as they can also do harm. The room should be glazed, and the possibility of leaks during precipitation should be excluded, because moisture causes corrosion, and accordingly, the service life will be significantly reduced. It is prohibited to store the product on an open balcony.
It should be noted that storage of vehicles on the balcony has many advantages. The owner can be sure that his property will not be stolen by intruders. The storage time is absolutely unlimited. In addition, operation becomes very convenient, and if necessary, simple repairs can be made on site.
However, there are also disadvantages. Among them, a decrease in free space on the balcony, inconvenience in cleaning due to the location of the bike. You will also need to organize storage space, for example, it should be hidden from direct sunlight.
Storing your bike in winter
If you do not plan to ride a bike all winter, and this is what most of our compatriots do, then the bike should be prepared for long-term storage. To do this, several conditions must be met.
Storage conditions The bike should be stored in a dry place at a positive temperature without sudden fluctuations. Thus, it is advisable to store the bike in an apartment. It is possible in a half-disassembled state, if the place does not allow. Other acceptable options are in a dry garage, preferably heated, or on a glassed-in balcony. In this case, cover it with a cloth to protect it from direct sunlight. It is strongly discouraged to store your bike on an open balcony due to the effects of moisture and temperature changes, in the basement. due to high humidity.
Preparation The bike must be well cleaned of dirt and old grease. The chain and joints of handles, brakes, gear shifters must be lubricated. Metal surfaces can be wiped down with an oiled cloth to create a protective oil film. But, given the large number of painted, anodized and aluminum surfaces on modern bicycles, only the chain and sprockets remain to be processed in this way.
It is advisable to relax all springs. To do this, set the front and rear gear selectors to the smallest sprockets and “release” the brakes if they are v-brakes. Disassembling the suspension fork is too complicated, but if you plan on overhauling it, you can remove the springs from it too.
It is advisable, before removing the bike for the winter, to carry out a bulkhead of all bearing assemblies: bushings, carriages, steering, pedals. This will avoid the “ingesting” of dirt from the old grease into the metal and will be an annual maintenance of the bike.
If your bike has a battery-operated headlight and taillight, remove the batteries when storing the bike for a long time. In a semi-discharged state, they tend to leak over time. This is especially true for cheap saline batteries.
Downsizing If you don’t have enough space to store your bike, you can hang it from the frame or wheel on a hook on the wall, or disassemble it and put it under a cabinet or mezzanine. For minimal disassembly, it is enough to remove the front wheel and fender, unscrew the pedals, turn the handlebar along the frame, remove the saddle with the seatpost. You can also remove the rear wheel, but then the bike will only have to be suspended or laid on its side.
Bicycle storage. Questions come up all the time, it’s time to write a comprehensive guide. First, let’s decide on the subject 🙂 Sorry, I’m not an artist, I will depict it schematically. These are the approximate dimensions of an average bicycle with 26 wheels with 19 frames and horns. Basic requirement. it is to put the bike down quickly, preferably quickly and get it out, therefore options with removing the rear wheel and removing the pedals are not considered as not suitable for the concept of “fast”. Nearly all bikes have a quick release front wheel and saddle that can be easily pushed in or removed altogether. The size of the bike is reduced significantly, given that the handlebars can be rotated 90 degrees. And this is a bike of completely different sizes.
Now it remains to find a place that meets the conditions:
Another small detail. I usually had to tune not one, but two bicycles. his own and his wife’s, so the task was a little more complicated. It is clear that having a garage near the house, or an apartment of 200 square meters, there will be no problems, but small one-room Khrushchevs or other “roofs over their heads” should also accommodate a bicycle. The two most suitable options, in my opinion, are “standing wardrobe” and “lying wardrobe”. “The wardrobe is lying”. position. when the bike is simply thrown onto the closet. this option is also suitable for 28 wheeled bicycles, the main thing is that the cabinet is deep enough. “Wardrobe standing”. a very exotic option, but also very convenient, I used it in a rented apartment. The wardrobe was 1.90 high and the remaining 80 centimeters to the ceiling was enough to put two bicycles side by side (feature. The handlebars did not turn. It remained perpendicular). At different times, I fixed bicycles standing in this way from falling in different ways. an elastic band that is thrown on both frames against the wall and a simple raising of the seat by 10 cm, while the bike “stretched out” between the cabinet and the ceiling and could not go anywhere. “Hanging pantry” is very convenient to hang the bike in the closet Vertically. To do this, you can use both a steel hook and a rope, an elastic band in the form of a loop. I use both options. I can’t stop completely, because both the rubber loop and the hook have their own pros. It is easier to hang on the hook, and easier to remove from the loop. In both cases, the bike is suspended from the upper front corner of the frame at one point, “two pins”. a very common option. two pins are driven into the wall at a sufficient height. led is hung by the frame. This option is also convenient for road bikers. since they already have the steering wheel, they don’t even need to remove the front wheel. can be hung as is. Especially noteworthy is the negative storage location. balcony. rarely does it really fit. Changes in temperature, humidity and cold. All this has an extremely negative effect on the bike, only a warm and dry balcony is suitable, which is extremely rare. Show ingenuity will not hurt you, and to stimulate your imagination I will list the places I have heard: Just standing in the corridor, behind the TV cabinet, on the ceiling, in the car :), in a niche between the closet and the wall, between two shelves under the ceiling of the pantry. Continue the list. success.