How to reset a bike lock

How to open a Cyclotech bike lock

reset, bike, lock

Cyclotech code lock is a budget option of a security device that compares favorably with analogs in the same price category in size and cost. It provides an effective and simple anti-theft protection. This option is also convenient in that you do not need to carry a key with you to open it, which can so easily get lost.

The device is unusually simple to operate, even a child can handle it. In order to pick the lock, you need to set four toggle switches in the desired digital combination. However, if the code is forgotten or lost forever, you have to sweat a little.

To open the cyclotech lock, follow the instructions below:

  • let’s start by setting on the first toggle switch any number in the digital range 0-99;
  • the stationary part of the device has a specially applied mark, each of the selected numbers will pass it three times before moving to the next level;
  • at each level, you must go through the above label until the correct cipher is found. It is possible that in the selection process you yourself will remember the desired combination;
  • on the third level, it is necessary to rotate the toggle switch counterclockwise to achieve the correct combination.

Therefore, if you lost the key, do not be discouraged, but proceed according to the following scheme:

  • a knife blade, half of scissors, a flat screwdriver or any similar device is inserted into the keyhole;
  • the inserted blade rotates with force along with the larva;
  • “Bike safety guarantee” is rented in literally seconds.

Step-by-step instructions for opening a bicycle combination lock

Algorithm of actions if you forgot the code on the bike lock:

  • we set all the numbers to the same position, for example, to 1111. The opening method is to pull both ends of the device with each combination. The goal is the appearance of a small gap that occurs when two numbers are correctly adjacent;
  • continue to pull and change the dial until there are gaps between all the numbers;
  • when the combination is found correctly, the device will open without problems.

Advice! If the device that needs to be unlocked is not currently on the bike, but, for example, you found in the closet or on the balcony, the above scheme can be slightly simplified by providing tension by winding the lock cable around the back of the chair.

How to open a bicycle combination lock

Among the mass of anti-theft devices on the market, the bicycle combination lock is the most trusted by consumers. Unlike traditional devices that are mechanically opened with a key, opening them requires setting the correct digital combination on the rotary toggle switches.

general information

A modern bicycle is far from a cheap pleasure, so it is quite logical that many are trying to protect valuable property by hanging anti-theft devices on it. Nowadays, you will not see a vehicle abandoned on the street and not attached by anything at least to any post, fence or bicycle parking lot.

The combination lock is fixed on a fixed support (bicycle rack), entangles quickly removable elements, preventing them from being removed.

We emphasize right away that the information below is not posted in order to push someone to unlawful actions. We tell you how to open a combination lock for those who, due to their own absent-mindedness or forgetfulness, have lost their password, and do not consider the option of biting the device with hydraulic scissors.

If we are dealing with the simplest code device, similar to the one installed on suitcases and cases, then we have to crack the code on three number wheels, which is about 1000 combinations. Enumeration of all possible takes usually no more than half an hour.

As you can see, it is very easy to break a cable lock from a bicycle without a key, therefore, for effective protection, experts insist on using several options for locking devices. Agree, if every student knows how to open a device, it cannot be considered reliable a priori.

How to open a lock without a key

Even if the door key is lost or broken, you can get home.

In every city there are emergency lock opening services ready to come to the rescue of anyone who has a door slammed, a key is lost or broken. You can find such masters by entering in the search engine “open the door the name of the city”.

As a rule, the specialists of these companies react quickly and deal with any locks. If necessary, you can immediately fix or change the lock, as well as make a duplicate key. The services of craftsmen will cost a pretty penny, but you will save your nerves.

If the lock is not very difficult and you are confident in your abilities, you can try to open it yourself. There are options with or without damage to the mechanism. One will not help. you can always try another.

Spanners

  • Take two bigger wrenches.
  • Insert them inside the bow and press against each other.
  • Press down on the keys until the bow or lock case breaks.

Drilling the deadbolt shank

  • Find a diagram of your lock on the Internet and find out the exact location of the bolt attachment.
  • Mark the desired location and drill through the lock body with a 10-12 mm drill.
  • Insert a screwdriver into the hole or use the sawn key to move the bolt and open the door.

Lock pick from paper clips

  • Take two paper clips and bend them as shown in the video.
  • Insert the first paperclip into the keyhole of the lock and twist it slightly to create tension.
  • With a second paper clip, try to press the pins inside.
  • Use both paper clips at the same time until the lock opens.

Lockpick from hairpins

  • Bend an L-shaped lever from a pin or wire, and from another pin make a lockpick with a bent tip.
  • Insert the lever into the hole and try to crank with minimal effort.
  • At the same time, use a master key to sort through the pins, alternately pressing on them.
  • When the pins find their place, the core will rotate.
  • Repeat the previous steps on each turn until the lock opens.

Knitting needle pick

  • Bend a pick with a bent tip from a knitting needle or stiff wire.
  • Insert any other similar key and turn it slightly, creating tension.
  • Move the lock pick, trying to raise the levers, and at the same time try to turn the key.
  • When all the plates are up, the lock will give in.
  • Repeat the procedure for the next turns of the key until the door opens.

How to open a padlock without a key

This is the most common and, as a rule, primitive lock, consisting of a body with a bow and a larva with a pin mechanism inside. You can open it without a key without much difficulty.

READ  How to fix a bicycle chain

How does a lock on a suitcase “work”?

Before closing the suitcase, the user sets a combination of numbers known only to him and locks the lock. To open it, you need to set the disks of special cylinders in such a way that the previously entered number appears in the slots. When all the numbers are set in the correct order, the locking device will snap off and the lock will open.

It is convenient to use the lock, and there are several reasons for this:

  • no need to store a key that can be lost;
  • replacement of the digital combination can be done every time the suitcase is used;
  • sending the code to your family (or, if necessary, to someone else) will enable everyone to use the suitcase without handing over the keys, again, they can get lost.

Unfortunately, there is a flip side of the coin. the combination lock also has enough drawbacks:

  • numbers are easily forgotten, especially if the thing has not been used for a long time. The suitcase lock is just the thing that is needed only from time to time;
  • the use of dates of birth, addresses, known numbers (for example, the numbers Pi, E) in a code combination makes the process of selecting a code for “specialists” elementary;
  • a code written on paper increases the likelihood of a stranger opening the lock. You can also spy on it, especially if it was opened and closed at the airport.

We look at the type of castle

There are two types of combination locks installed on a suitcase:

  • fixed;
  • hinged.

The first type of locks are located on the upper outer panel of the suitcase and are fixed to it with bolts. You can view the fasteners by opening the zipper on the lining. In some cases of emergency opening of the lock, they act by removing it from the bolts.

Padded combination locks are a metal structure with an eyelet and dials for dialing a code, with which the safety of luggage is ensured.

To open a lock of a certain type, you need to understand what in this case is a locking device. In the case of a fixed lock, you need to act on the wheels with numbers, which, if all the numbers of the code match, will unlock the bolt and the lock will open. If we are dealing with a padlock, then the discs can be opened only through the power load on the lug of the lock.

Mechanical methods to open a suitcase

If you are the owner of a premium suitcase, then you will definitely not need the following methods. And with simpler models, you can try to cope by prying the latch on the lock with a simple nail file, a thin minus screwdriver, a knife blade.

Nothing helped. there are cardinal methods:

  • The padlock can be simply cut or cut if suitable tools are available;
  • The suitcase can be opened through the zipper, and then unscrew the lock and, after removing the back cover, unlock the stops. Lightning in this method is sacrificed: by inserting a pen or screwdriver (nail file) in its center, spread the left and right sides to the sides. Everything, the suitcase is open. Hurry to repair the zipper or sew in a new one. Only specialists can handle this.

Hack a Bike Lock Combination! Forgot bike lock combo? Lost Combination? Here is how to solve it

How to reset a password on a Samsonite suitcase?

Different models of TSA combination locks are installed on suitcases. In order to change the factory settings, follow these steps:

  • Set the digits of the code 000;
  • Press the button into the body with a hairpin or handle;
  • We type a new digital combination with the button pressed;
  • Let go of the hairpin. New code installed.

Important! In some modifications of locks, when you press the button, it is fixed in the case. Reset by pressing again.

What to do if you forgot your suitcase code?

There are several ways to select a digital lock code. They are simple and humane, but can be time consuming. If you need to quickly open a suitcase, more radical methods are used that do not spare the locking mechanism and zipper.

The best way to open the lock is to contact a specialist who will not only free your belongings, but will help you set a new code and lubricate the mechanism. However, for solving the problem and maintaining the lock, you will need to pay a certain amount, as well as prove that you are the owner of the suitcase (for example, using a luggage receipt, warranty card or check).

If for some reason you do not contact the wizard, try to deal with the problem yourself using the methods listed below. Choose the ones that seem most suitable for you. Remember that extreme opening methods will inevitably entail additional costs.

How to change or reset the code on a suitcase?

It is impossible to travel without a suitcase. the minimum set of necessary things should always be with you. Their safety is ensured by a combination lock. But there are situations when the owner of the suitcase forgets the combination of numbers he invented. The problem is completely solvable, keep calm and try our suggested methods from simple to complex. Only resort to drastic measures in extreme cases.

Ways to Crack Password

Factory settings usually consist of three “0” or three “1”. Try typing these combinations first. If it doesn’t help, go to another method.

Think about what numbers you could choose as a password. random or dates of some significant events. Pick up combinations with birthday, wedding, diploma defense, childbirth, etc. It did not work out. do not despair. Let’s do it differently.

Slowly rotating the dial wheel, listen for sounds. A characteristic click will indicate that the disc needs to be stopped at this point. Repeat the same action with the two remaining mechanisms. Open the latch of the lock.

Important! This method is easier to use if, in complete silence, you close your eyes and listen to clicks.

This method is not suitable for high-quality products: the wheels of the discs rotate there silently. No matter how much you strain your hearing. with your eyes open or closed. you will not be able to hear or change anything. But you can use one more method. an elementary selection of the code digits starting from 001, 002, 003 and so on to the correct digits. Of course, this is a long time, perhaps even a couple of hours. But the result is guaranteed, sooner or later the code combination will fall into place, and the lock and fasteners of the suitcase will remain intact.

As you scroll the wheels, you will notice a small gap underneath the disc at the bottom. This is a signal that the desired digit has been found. Continue spinning the rest of the discs. If the number is wrong, nothing will be visible, with the correct number you will see a small groove on the bottom. Set all values ​​and open the suitcase. If it does not work, try to synchronously rotate all the numbers by 1-2 divisions to the left and right until the lock is released.

In a similar way, you can work with discs without turning them, but highlighting the gap between the wheel and the lock body with a flashlight. A small indentation opposite the number indicates that the number you are looking for has been found. Work in this way on all the disks, and the result will help to open the suitcase. As a variant of this method, work not with a flashlight, but with a thin object such as an open paper clip, which in the gap between the disc and the lock panel should feel for a recess.

READ  How to find out your bike frame size in inches

A combination padlock can be “listened to” if the steel eyelet is pulled back strongly and the wheels are turned. A light click will help you identify the correct number on the disk.

Where to see the details of trips?

The service is available in the following cities:

  • Golubitskaya
  • Temryuk
  • Sevastopol
  • Yalta

Inspect the scooter for visible damage before renting. Scan the QR code. The scooter will turn on after pressing the “activate” button. Enter the code from the application on the lock and open it. Secure the lock so that it does not interfere with movement. To start the movement, push off with your foot and press the throttle stick on the right side. After opening the lock, check that the scooter is working properly, you have 3 free minutes for this.

You can contact the operator in the application, section “Help”. “Report a malfunction”.

If you cannot enter the application, you can write to us by mail:
info@seagull.one

And on the phone?
The service does not have a hotline. We will answer you in the application or by mail.

Support work schedule:
The technical support operator will answer you from 08:00 to 20:00.
If you encounter a problem outside technical support hours, the operator will answer you during business hours first.

What to do with a scooter outside of working hours?
Complete the lease according to the rules.

Make sure that you:
– in an approved parking space (scooters standing in the parking lot do not guarantee the possibility of completing the lease, open the application and check on the map);
– fasten the electric scooter with a lock (if the electric scooter has a lock);
reset the lock code to position “0000” (if the electric scooter has a lock).
If all these steps have been taken, and you cannot complete the lease, take a picture of the attached electric scooter and write to the operator about the problem. The rental will end automatically after some time, and during working hours the operator will consider your request and compensate for the trip.

Scooter sat down:
You have 5 minutes of free time, return the scooter to the parking space and end the rental.

There is no button “End lease”, there is only “Waiting”.
You are out of the lease completion zone. Move the vehicle to the marked areas.

Make sure the scooter is in an approved area to complete:
The completion zone is marked with a blue “P”;
Attach the scooter to the rack, reset the lock code, take a photo of the scooter fastened to the rack.

Did not work out? Write an email to info@seagull.one, indicate the account phone number, scooter number and scooter geolocation.

The castle is closed, and rentals and debits continue:
To end the lease, it is not enough to close the lock, click the end lease in the app.

The lock on the electric scooter does not close:
Check that the code matches and all the numbers are set exactly.
Did not work out? Contact the operator in the application, “Help” section. Provide a photo of the castle and the location of the vehicle. If you do not report a problem, a fine may be charged for not wearing a scooter.

2.3. The driver of the vehicle is obliged:

2.3.1. Before leaving, check and, on the way, ensure that the vehicle is in good technical condition in accordance with the Basic Provisions for the Admission of Vehicles to Operation and the duties of officials to ensure road safety (hereinafter. Basic Provisions).

It is forbidden to drive in the event of a malfunction of the working brake system, steering system, coupling device (as part of a road train), unlit (missing) headlights and rear parking lights at night or in conditions of insufficient visibility, a wiper that does not work on the driver’s side during rain or snow.

  • drive a vehicle in a state of intoxication (alcoholic, narcotic or otherwise), under the influence of drugs that impair reaction and attention, in a sick or tired state that endangers traffic safety;
  • transfer control of a vehicle to persons who are intoxicated, under the influence of drugs, in a painful or tired state, as well as to persons who do not have a driver’s license for the right to drive a vehicle of the corresponding category or subcategory, except for cases of driving instruction in accordance with section 21 of the Rules;

8.1. Before starting a movement, changing lanes, turning (turning) and stopping, the driver must give signals with direction indicators of the appropriate direction, and if they are absent or faulty. with his hand. When performing the maneuver, there must be no danger to traffic, as well as interference with other road users.

The signal of the left turn (turn) corresponds to the left arm extended to the side or the right arm extended to the side and bent at the elbow at a right angle upward. The signal of the right turn corresponds to the right arm extended to the side or the left arm extended to the side and bent at the elbow at a right angle upward. The braking signal is given by the raised left or right hand.

The bicycle rider must give turn signals before driving, changing lanes, turning and stopping. Since bicycles are not equipped with direction indicators, signals must be given by hand. Accordingly, the left hand extended to the side corresponds to the left turn signal, and the right hand extended to the right turn signal.

Turn signals must be given well in advance of the turn. You can return your hand to the steering wheel just before turning.

9.5. Vehicles, the speed of which must not exceed 40 km / h, or which, for technical reasons, cannot reach such a speed, must move in the extreme right lane, except when bypassing, overtaking or changing lanes before turning left, making a U-turn or stopping in permitted cases on the left side roads.

9.9. The movement of vehicles on dividing lanes and shoulders, sidewalks and footpaths is prohibited (except for the cases stipulated in paragraphs 12.1, 24.2 of the Rules).

24.2. Bicycles, mopeds, horse-drawn carts (sledges), riding and pack animals should move only in one row as far to the right as possible. Driving on the side of the road is allowed if it does not interfere with pedestrians.

Most often, for technical reasons, bicycles cannot reach a speed of 40 km / h, so they must move along the rightmost lane of the carriageway in one row as far to the right as possible.

In addition, bicycles can move along the side of the road. However, bicycles are prohibited on the sidewalks. If you want to move on the sidewalk, then you need to get off the bike and thereby equate yourself with a pedestrian.

Bicycle riders must let pedestrians pass

14.1. The driver of a vehicle approaching an unregulated pedestrian crossing (the concepts of a regulated and unregulated pedestrian crossing are similar to the concepts of a regulated and unregulated intersection, established in paragraph 13.3. Of the Rules), must slow down or stop before the crossing in order to let pedestrians crossing the carriageway or entering it to make the transition.

A bicycle, like any other vehicle, must slow down or stop before crossing to let pedestrians pass.

In the dark, the headlights or lanterns should be on on the bike, and in the daytime, the dipped headlights or daytime running lights:

19.1. At night and in conditions of insufficient visibility, regardless of the lighting of the road, as well as in tunnels, the following lighting devices must be switched on on a moving vehicle:

READ  How To Lubricate Front Shock Absorbers On A Bicycle

on all motor vehicles and mopeds. high or low beam headlights, on bicycles. headlights or lanterns, on horse-drawn carts. lanterns (if any);

19.5. During daylight hours, on all moving vehicles for the purpose of their identification, dipped headlights or daytime running lights must be switched on.

Age to ride a bike

24.1. Persons at least 14 years old are allowed to drive a bicycle, horse-drawn carriage (sleds), to be a driver of pack animals, riding animals or a herd while driving on the roads.

24.3. Bicycle and moped drivers are prohibited from:

It is prohibited to tow bicycles and mopeds, as well as bicycles and mopeds, except for towing a trailer intended for use with a bicycle or moped.

The RULES OF THE ROAD OF THE RUSSIAN FEDERATION can be found at the link.

Rent and finance:

Tariffs in different cities may differ.

You can check the current rental price in the app by clicking on the electric scooter icon on the map. The current tariff will also be displayed when scanning the QR code in the application, under the transport number.

Electric scooter activation. up to 50 ₽. In some cities it may cost less. The activation fee for the electric scooter is deducted for each rental.

The debt will be paid off automatically the next time you rent. Or write an email to info@seagull.one, indicate the phone number to which the account is registered, we will do it remotely.

After the start of the rental, there are 3 free minutes to test the electric scooter. If the scooter for any reason is faulty, damaged, does not ride, etc., complete the rental with an indication of the problem and the money will not be debited from your account.

To clarify on the issue of write-offs, write an email to info@seagull.one, indicate the phone number to which the account is registered, describe the reason for the request. Attach a screenshot of the write-off.

You can link a card in the section “My wallet”. “Payment methods”. “Link a card”.

Bank card VISA or MasterCard of Standart class or higher. Check your card expiration date, it shouldn’t expire in the current month.

You can delete the card in the section “My wallet”. “Payment methods”. Select the card and click the “Delete” button.

Frequently asked Questions:

You can check the current rental price in the application by clicking on the electric scooter icon on the map. The current tariff will also be displayed when scanning the QR code in the application, under the transport number.

Tariffs in different cities and for different partners may differ.

Please note that in some cities, when you start renting an electric scooter, a fixed amount is debited for activating the transport.

During the rental:

You can contact SeaGull technical support in the application, “Help” section, as well as write an email to info@seagull.one. Clarify your request and indicate the vehicle number and account phone number.

You have 5 minutes of free time, return the scooter to the parking space and end the rental.

The electric scooter can be in the “Standby” mode for no more than 30 minutes, after which the rental will be automatically terminated.

How to reset a Kryptonite Combo Cable

You can end a lease in the gray zone only with a fine.

You can freely rent an electric scooter in the gray area, but you can end your rental only in the permitted area.

If, when checking the condition of a scooter rented in the gray area, you find any damage or malfunction, report them to the operator and complete the rental termination procedure by fastening the scooter and resetting the code. The operator will complete the lease and make compensation.

Rental start:

The scooter cannot be used in heavy rain and wind. Bumps must be driven carefully at low speed. Check the brakes before driving, observe the speed limit, use a helmet.

The maximum allowed weight of the electric scooter user is 100 kg.

FORBIDDEN: using an electric scooter in a state of alcoholic and drug intoxication, as well as riding on one scooter, two or three people. this can lead to serious injuries to users and a fine of 1000 ₽.

White area. area of ​​use;
Gray zone. no lease can be completed in this zone.
You can complete the lease of an electric scooter:
Anapa. the completion zone is marked with a blue “P”;
Krasnodar. the completion zone is marked with a blue “P”.

Inspect the scooter for visible damage before renting. Scan the QR code. The scooter will turn on after pressing the “activate” button.

Enter the code from the application on the lock and open it. After opening the lock, check that the scooter is working properly, you have 3 free minutes for this. Secure the lock so that it does not interfere with movement. To start the movement, push off with your foot and press the “gas” stick on the right side.

Scan the QR code. The scooter will turn on after pressing the “Activate” button. Enter the code from the application on the lock and open it. Repeat this action with the next scooter, use the “Scan” button.

Make sure the scooter number on the terrain matches the scooter number in the app. Check the correctness of the code set and whether all the numbers are set exactly.

If it didn’t work out, write an email to info@seagull.one, indicate the phone number to which the account is registered. Attach a photo of the closed lock and the location of the vehicle to the letter.

Before renting, examine the vehicle for visible damages. indicate them in the application. If the damage is minor, you can start renting after submitting the photos. Always check the brakes before driving.

If the damage is significant (deformation of the wheels, damage to the frame, inoperative brakes, etc.), complete the rental and rent another vehicle.

How to reset a bike lock

End of lease:

Anapa: Complete the rental in the parking lot. The parking lot is marked with a blue “P” sign. It is necessary to fasten the scooter and reset the code on the lock to the “0000” position. To end the lease, hold the “End lease” button in the application.

Krasnodar:
Complete the rental in the parking lot. The parking lot is marked with a blue “P” sign. It is necessary to fasten the scooter and reset the code on the lock to the “0000” position. To end the lease, hold the “End lease” button in the application.

Check that the code matches and all the numbers are set exactly.

Did not work out? contact the operator of technical support in the application. section “Help”.

You are out of the lease completion zone. Move the vehicle to the marked areas.

Make sure the scooter is in an approved area to complete:
The completion zone is marked with a blue “P”;
Fasten the scooter to the rack, reset the code, take a photo of the strapped scooter to the rack.

Did not work out? Contact the operator in the application (“help” section) or write an email to info@seagull.one, indicate the account phone number, scooter number and scooter geolocation.

To end the lease, it is not enough to close the lock, click the end lease in the app.