How to remove the right pedal on a bike

Installing the bicycle pedal

Before installing a new pedal, the axle threads should be cleaned of dirt by wiping with a clean cloth and also lubricated with grease. Thanks to such simple actions, the pedals will be able to slide into place smoothly, and their subsequent removal will take place without any problems.

  • We take the right pedal and set it in place by twisting it clockwise. For a start, it’s better to twist with your hands. This way you minimize the risk of damage to the threads if the pedal is not level.
  • We take the key and tighten the pedal tightly.
  • Install the left pedal by twisting it counterclockwise.
  • In order to prevent the pedals from unscrewing spontaneously during the ride, both nodes must be well stretched with a key.

The bicycle pedal replacement process is now complete. Enjoy your trip!

If you still have questions, check out this video review. It will help you better understand the pedal replacement process and avoid mistakes.

Variety of pedals

Depending on the platform, the pedals are divided into:

remove, right, pedal, bike

How To Remove Pedals From A Bicycle 2 Worst MISTAKES. Change Pedals.

A few words about the fixator

  • the red clamp has the highest strength indicator. it will not work to turn the pedal after its application (you will have to resort to using the same “angle grinder”);
  • the green retainer can be weak or high strength. it depends on the manufacturer;
  • retainer blue or blue. medium strength.

There are also purple fixatives with moderate strength and purple compounds with the lowest performance on the market. To subsequently turn the pedal without applying titanic efforts, you should use a blue or blue retainer.

How to remove pedals from a bike

In this article, I will describe the process of removing and installing bicycle pedals. Bicycle pedals are mounted on cranks, which are attached to the carriage, which, in turn, is installed in the carriage assembly of the bicycle frame. You don’t need any special tools to remove the pedals from the bike, such as removing the cranks. I use a regular adjustable wrench (not large, otherwise it will not fit into the nut), you can also use a 15 mm open-end wrench or a pedal wrench, some pedals can also be removed with a regular 6 or 8 mm socket wrench, which are in the bicycle set.

All the designations of the pedals will be based on the assumption that the bicycle is on wheels, that is, the right pedal is the one on which you put your right foot while riding, the left pedal, respectively. left leg. Stand when unscrewing the pedals on the same side from which they are located. All this is necessary in order not to confuse the direction of unscrewing the pedals.

The right pedal (with stars) has a regular thread and is unscrewed counterclockwise, while the left pedal (no stars) has a reverse thread. left-handed and unscrews clockwise. To remove the pedals, take a suitable wrench and unscrew the axle in the desired direction. Later in the article I will write some tips if you cannot loosen the pedals.

Place the bike on wheels, set the pedal so that the crank is directed towards the front wheel.

Take a key, preferably a bicycle key, it is long enough to give a suitable lever. Install the wrench so that it is almost parallel to the crank arm, if possible.

Press the key in the desired direction (right pedal counterclockwise, left pedal clockwise). This position will allow you to make maximum efforts and push the key with your whole body.

If the pedals do not unscrew, then the place where they are screwed to the connecting rod can be heated. Due to the fact that the material from which the pedals and cranks are made expand at different rates when heated, this can help when removing the pedals. Keep in mind that you can only heat up by pouring hot water onto the connecting rod, do not use burners for this purpose, an open flame will damage the connecting rods.

Types and structure of bicycle pedals

Before proceeding with self-repair, you need to get general information about the types and structure of this seemingly simple element of the bike. Conventionally, bicycle pedals are divided into ordinary (traditional) designs, contact ones designed for special shoes, as well as combined ones, combining both types. one plane is ordinary, the other is for special sneakers. All types are structurally almost the same and consist of the following elements:

  • the axis is the basis of the entire element, which is a pin made of metal, screwed into the connecting rod;
  • platform. a part directly in contact with the cyclist’s leg, attached to the axle;
  • bearings. elements that provide a movable (do not impede rotation) connection between the axle and the platform;
  • additional parts. bolts, nuts, guaranteeing reliable fixation of all components of the pedal.

Having received information about the structure of this element of the bicycle, you can proceed directly to the repair.

Important! Before proceeding with the repair of the left or right pedal, it is necessary to prepare the corresponding tool. You will need a small adjustable wrench to get to the nut without interference. Puller and pedal wrench: the first is for contact types, the second is for non-standard nuts. Both tools are usually supplied with.

Most often, cyclists are faced with the fact that it is not the pedals themselves that are unscrewed, but the connecting rod itself. the lever that transfers the rotation energy to the system of stars and chains, forcing the bike to ride. This is due to a factory defect in rare cases, due to wear of parts, but more often due to poor-quality assembly after maintenance (lubrication of elements) or replacement of the unit. The play that occurs when riding on a loosely fixed connecting rod on the axle looses the fixing bolt, which, in turn, turns the square of the carriage into a more abstract figure. Ideally, a failed unit should be replaced. However, if such an opportunity is not observed in the near future, and you want to ride a bike, you can fix the problem yourself.

READ  How to screw the front fender to the bike

Fantastic recipes are offered on various forums on the Web for solving the problem of unscrewing the pedal. up to the use of welding. Yes, it is possible to weld the connecting rod tightly, if it is metal, to the axle, and it really will never unscrew itself. But when the time comes for replacement, it will only be possible to remove it with the help of an “angle grinder”. It is much more effective and practical to use a thread lock. an anaerobic (curing without oxygen access) composition that functions like glue for metal. The process is as follows:

  • We carry out disassembly of the “damaged” bicycle assembly using the tools prepared in advance.
  • The carriage axis, the inner planes of the connecting rod, the thread of a bolt or nut (in cheaper designs) should be thoroughly cleaned of grease. To do this, you must have rags and a special mixture (can be replaced with ordinary kerosene).
  • Next, we assemble the assembly, but before tightening the bolt, we apply a few drops of the retainer to the thread.

While the bolt is tightened, the compound is evenly distributed over the entire surface, gluing the elements together. As a result, the load, thanks to the retainer, is evenly distributed along the entire length of the thread, self-loosening is excluded, and reliable protection against the appearance of corrosion and rust appears.

Important! You should be aware that bicycle pedals have different threads, designed to be self-tightening. In other words, the axle of the right pedal is unscrewed counterclockwise. Conversely, the axle of the left pedal is unscrewed clockwise.

Removing bicycle pedals

When starting to dismantle the pedal, it is important to remember that the thread on bicycle pedals is different, namely: the axis of the left pedal has a left thread, therefore it is unscrewed clockwise, and right. right and unscrewed counterclockwise.

  • To begin with, the system slides in the direction of the steering wheel, and then the pedals are gently unscrewed from the crank.
  • Remove the plug located at the end of the platform, thereby opening the lock nut.
  • We unscrew the lock nut, while holding the axle at the connecting rod with the second key.
  • Remove the lock washer located at the end.
  • Unscrew the cone.
  • Removing the platform from the axle, do not forget about the bearings. Better to shoot them separately. If they are loose, then you should put a rag or sheet so that the balls do not roll in different directions.
  • On the pedal in the place indicated by the arrow (see figure), fix the puller and unscrew.
  • Removing the axle from the pedal body without much effort.
  • Unscrew the lock nut securing the entire axial structure. To do this, you need to hold the axis itself with a key, or clamp it in a vice.
  • We take out all the nodes in order. At the same time, do not forget about the bearings and make sure that they do not scatter.

For reference: on each side, their quantity is 12 pieces.

Important! Due to the constant influence of the environment and the serious mechanical stress to which the pedal is subjected, some difficulties may arise when twisting this unit. Experienced cyclists use two techniques to make it easier to remove the pedals:

  • The bicycle pedal can be soaked in solvent or kerosene to get rid of any clogged dirt blocking rotation as much as possible.
  • The connecting rod and axle can be heated: slight deformation will loosen the threads and help remove the axle.

How To Remove Bike Pedals

It is also important in the process of installing the pedal, while twisting the axle, not to damage the thread, because this will significantly complicate the subsequent removal process. Everything needs to be done as carefully as possible.!

How to change pedals on a bike

The bicycle pedal, as an integral part of the crankset design, is a fairly simple part in itself, but it is thanks to it that the bicycle wheels are set in motion. Due to the high stress on the pedals, special attention must be paid to them.

During the operation of the bicycle, one should not forget about regular maintenance of the pedals, which, as a rule, includes: inspection for cracks, chips, play, moisture or sand, etc., as well as cleaning and lubricating the threads of the axle and the connecting rod itself.

If the pedal for any reason is out of order and needs to be repaired (serviced) or replaced, the bike owner will have to deal with some of the features of its dismantling.

First, let’s get acquainted with the design of pedals, their types, and consider what tools should be prepared before work.

Disassembly of bike pedals

The main feature of disassembling the pedals is that they have different threads.

Therefore, the right pedal is unscrewed counterclockwise, and the left pedal clockwise.

READ  What is the Maximum Speed ​​of a Bike

To unscrew the pedal from the connecting rod, you need a 15 wrench that can crawl into the gap between these two parts.

After dismantling the pedal, disconnect the plug and unscrew the lock nut with a socket wrench. Then remove the washer and bearing cone.

The cone should be twisted carefully so as not to lose the balls. Pull out all the bearing balls and set them aside.

It is important not to overturn the pedal and support the axle, which can also fall out along with the elements of the second bearing.

It is better to count the balls in order to know the exact number of elements. After that, from the opposite side, you can directly pull out the axis.

Since the balls of the second bearing can be glued to it on the old grease, you need to be careful. It is advisable to perform an operation on some kind of rag so that the dropped balls do not roll away.

The balls of the first and second bearing should not be confused, so put them in different places to know the position of each individual element.

Having disassembled the structure, proceed to cleaning. You can remove old grease with ordinary rags and WD-40, which can soften the stuck grease without damaging the parts.

When you may need to remove bike pedals

The peculiarity of the pedals is that they have symmetrical threads.

Each of them must have a label: which is left and which is right. Usually these are the English letters L. Left (left) and R –Right (right), respectively, for the left and right pedals.

The left pedal is always made with a left hand thread. This means that it twists counterclockwise and unscrews clockwise.

On the right, there is a regular right-hand thread. Twists clockwise and unscrews counterclockwise.

This is done so that when the pedals are spinning while the bike is moving, they do not unscrew.

It is easier to remember the rule: the pedals are unscrewed against the direction of the bicycle’s movement. twist to the rear wheel, and twist in the direction of travel. twist to the front wheel.

How a bicycle pedal works

To start repair work, first you should familiarize yourself with the device of the product. It is important to understand that they are all different and are part of the whole system. The following parts of the pedal are distinguished:

  • platform. the contact surface on which the sole stop falls;
  • axial rod. metal pin, which is the basis of the medal, which is included in the connecting rod;
  • bearings. the connecting unit between the platform and the axle, which provides rotation;
  • fittings. fixing elements of component elements (nut, bolts).

There are two types of bicycle pedals: regular and contact pedals. The first case is more common and easier to deal with. In the second case, there are mounts for cycling shoes. These pedals are harder to remove, this will require certain knowledge and skills.

The need for dismantling can arise for a number of reasons: replacement of the connecting rod or its repair, replacement of the pedal as a result of its damage, lubrication of mechanisms. The process will not take long if you have all the necessary tools and materials at hand.

How to Remove & Install Bike Pedals | Bicycle Repair

Reasons for concern

There are a number of signs that indicate that the pedal needs lubrication:

  • Creak;
  • Difficulty rotating;
  • Full pedal stopper.

If you find yourself showing signs of a lack of lubrication, do not postpone the procedure. over, the operation does not require special skills and is quite simple.

Since the hub of the pedals of a bicycle is the same on all types, consider the general procedure that applies to all models.

Design features

How to choose bike pedals, read here.

Despite the different appearance, the internals of the bike pedals are identical. There is an axis inside the plastic or metal case of the part. On the one hand, it is fixed to the connecting rod with a thread, and on the other, it is tightened with a lock nut and washer.

To get to the lock nut, you need to dismantle the plug from the end of the pedal. Also, for smooth rotation, there are two bearings in the design of the pedals.

The first bearing is located under the washer, and on the other side of the axis inside the housing there is a second.

The outside of the bike pedals can be fitted with rubber pads or a rim with metal teeth.

This is intended to improve the grip of the cyclist’s foot on the pedal. Platform metal bike pedals often have pins that perform the same function.

There may be reflectors or reflectors on the sides of the parts to help other riders see your bike from afar.

As you can see, although the pedals have differences in external design, they remain almost the same from the inside. Therefore, the order of their parsing and lubrication will not differ.

How to install and remove bicycle pedals

In this article, I will describe the process of removing and installing bicycle pedals. Bicycle pedals are mounted on cranks, which are attached to the carriage, which, in turn, is installed in the carriage assembly of the bicycle frame. You don’t need any special tools to remove the pedals from the bike, such as removing the cranks. I use a regular adjustable wrench (not large, otherwise it will not fit into the nut), you can also use a 15 mm open-end wrench or a pedal wrench, some pedals can also be removed with a regular 6 or 8 mm socket wrench, which are in the bicycle set.

READ  How to disassemble a sports bike rear hub

All the designations of the pedals will be based on the assumption that the bicycle is on wheels, that is, the right pedal is the one on which you put your right foot while riding, the left pedal, respectively, is the left foot. Stand when unscrewing the pedals on the same side from which they are located. All this is necessary in order not to confuse the direction of unscrewing the pedals.

The right pedal (with stars) has a regular thread and is unscrewed counterclockwise, and the left pedal (without stars) has a reverse thread. left-sided and unscrewed clockwise. To remove the pedals, take a suitable wrench and unscrew the axle in the desired direction. Later in the article I will write some tips if you cannot loosen the pedals.

Place the bike on wheels, set the pedal so that the crank is directed towards the front wheel.

Take a key, preferably a bicycle key, it is long enough to give a suitable lever. Install the wrench so that it is almost parallel to the crank arm, if possible.

Press the key in the desired direction (right pedal counterclockwise, left pedal clockwise). This position will allow you to make maximum efforts and push the key with your whole body.

If the pedals do not unscrew, then the place where they are screwed to the connecting rod can be heated. Due to the fact that the material from which the pedals and cranks are made expand at different rates when heated, this can help when removing the pedals. Keep in mind that you can only heat up by pouring hot water onto the connecting rod, do not use burners for this purpose, an open flame will damage the connecting rods.

How to install and remove bicycle pedals

In this article, I will describe the process of removing and installing bicycle pedals.

All the designations of the pedals will be based on the assumption that the bicycle is on wheels, that is, the right pedal is the one on which you put your right foot while riding, the left pedal, respectively, is the left foot. Stand when unscrewing the pedals on the same side from which they are located. All this is necessary in order not to confuse the direction of unscrewing the pedals.

The right pedal (with stars) has a regular thread and is unscrewed counterclockwise, and the left pedal (without stars) has a reverse thread. left-sided and unscrewed clockwise. To remove the pedals, take a suitable wrench and unscrew the axle in the desired direction. Later in the article I will write some tips if you cannot loosen the pedals.

Place the bike on wheels, set the pedal so that the crank is directed towards the front wheel.

Take a key, preferably a bicycle key, it is long enough to give a suitable lever. Install the wrench so that it is almost parallel to the crank arm, if possible.

Press the key in the desired direction (right pedal counterclockwise, left pedal clockwise). This position will allow you to make maximum efforts and push the key with your whole body.

If the pedals do not unscrew, then the place where they are screwed to the connecting rod can be heated. Due to the fact that the material from which the pedals and cranks are made expand at different rates when heated, this can help when removing the pedals. Keep in mind that you can only heat up by pouring hot water onto the connecting rod, do not use burners for this purpose, an open flame will damage the connecting rods.

Pedal design

They are not all the same and you need to know a little about their construction. So, the pedal is part of a system that includes a set of sprockets, a crank carriage and, in fact, a set of axles, platforms, bearings and accessories. on this below.

Structurally, a bicycle pedal consists of several parts:

  • The axle is a metal pin that is screwed into the connecting rod. Provides the basis for the rest of the structure.
  • Platform. a plane that contacts the foot and is fixed on the axis.
  • Bearings. the assembly that connects the axle and platform, allowing rotation.
  • Fittings. bolts and nuts that fix all the components of the pedal. Unscrewed during disassembly.

On the platform, the pedals are divided into contact (with fastening for special shoes) and ordinary. The method of removal depends on the type: for contact mechanisms, the fastening scheme is slightly more complicated. Combined options, combining, on the one hand, an ordinary platform, and on the other, a contact device, are no different in terms of dismantling from contact.

What tool are pedals removed

When using an adjustable wrench, be sure to pay attention to its thickness. The fact is that the distance between the pedal mount and the connecting rod is not large, and not every adjustable wrench will fit there. Some types of wrenches come with thin jaws that can be used. Open-end wrenches or special pedal keys are great for this operation.