How to remove the left bicycle pedal

In this article, we took a quick look at the different types of bicycle pedals and which ones are better. Now we can say with confidence that for each type of bike, those that were specially designed for it should be used. On mountain, for example, you can install almost any type of pedals, and platforms are better suited for a freeride bike. But the main thing when using bicycle pedals is to timely carry out maintenance, disassembly, lubrication and, if necessary, repairs (all the more, removing them from the bike is not such a difficult task).

How to remove and disassemble bicycle pedals

Removing the pedals from the bike, for example, for replacement or repair (maintenance) is not a difficult task if you know how to do it correctly. The main trick here is that the left and right pedals are unscrewed differently.

The right one is unscrewed classically. counterclockwise, and the left, on the contrary. clockwise (has a left-hand thread). This is done so that the pedals do not spontaneously unscrew from the connecting rods while driving.

remove, left, bicycle, pedal

Bicycle pedals can be removed using an adjustable spanner, open-end wrench for 15, the so-called parrot key, or a specialized one for dismantling the bicycle pedals. It should be noted that the gap between the pedals and the crank is 12 mm, so you need to choose a tool that will fit between these parts. For further complete disassembly, we also need a set of socket wrenches.

How To Remove Bike Pedals From a Bike the Quick & Easy Way | #AdventureBiker

After we have unscrewed the pedal from the connecting rod, we can begin to disassemble it. To do this, follow these steps:

  • Remove the plug at the end of the pedal. To do this, pry it with a screwdriver or other thin, sharp object.
  • Using a socket wrench, unscrew the locking locknut and remove the washer.

Lubricate the pedals without completely disassembling them

If you find that the pedals have become difficult to rotate, and there is no way to disassemble them at the moment, then lubrication without complete disassembly may be a temporary solution. For this, you can use almost any liquid oil. In my case, I used liquid oil for sewing machines I-20. But let’s clarify right away that this is only a temporary solution; in the future, a complete lubricant change should be performed.

  • We put the bike on its side so that the pedal, which will need to be lubricated, looks straight up with its end.
  • Remove the plug at the end with a screwdriver (or other improvised means).
  • Slowly pour liquid sewing machine oil (about 2 ml.) Inside the pedal (while you can rotate it slowly).
  • Install the plug and, without lifting the bike, quickly rotate the pedal for 10 seconds.
  • We put the bike on the wheels and pedal several times. It should spin easily and for a long time.

This completes the process of lubricating the bicycle pedal without completely disassembling it. Over time, liquid oil will still leak out of its cavities, and the problem will return. Therefore, as free time appears, you should still disassemble and replace the grease in the bearings.

Bicycle pedal device

The design of bicycle pedals is very similar in principle to the front wheel hub. Unless, instead of spokes, a platform is fixed on it under the cyclist’s foot, and there is a thread on its axis with which it is attached to the connecting rod. Therefore, below we will consider what a bicycle pedal usually consists of. But before that, it should be clarified that today on the market for bicycle parts, pedals are divided into three (this is not counting the division for different bicycles) main groups: classic, platforms and contact.

Bicycle pedal bushings: disassembly, lubrication and repair

What to do if the pedals on the bike are stuck together, difficult to rotate, or not spinning at all? This is not such a terrible breakdown as it might seem at first glance. While some of them may look slightly different, the design of most of them is almost the same. The differences mainly lie in the different form factor of the platforms, which can be not only different in size, but also have special hooks for specialized cycling shoes. But the pedal hub of the bicycle on almost all models has the same design. Therefore, in this material, using an example, we will consider the questions of how to remove pedals from a bicycle, disassemble, lubricate and repair them if necessary. We’ll also take a look at the pedals and talk about which pedals are best for different bikes.

Assembling the bicycle pedal

After we have decided how we will lubricate the bearings, we will proceed to assembling and installing the pedals on the bike.

  • Apply grease to the second bearing cup. You do not need to overlay it too much, but it is also not worth saving. The golden mean will be to apply so much grease that you can glue the bearing balls to it so that they do not fall out.
  • We put the balls of the second bearing in the cup. For convenience, it is better to use tweezers. It is important not to confuse them with the first ones and count them carefully so that everyone is in place.
  • We set the axis carefully. We do this slowly so as not to displace the balls of the second bearing. After the axle is inserted into the pedal body, make sure that it does not fall out back.
  • We apply grease to the cup of the first bearing in the same way as in the second.
  • We put the balls of the first bearing in the cup.
  • We screw the cone onto the axle and adjust its tightening. To do this, we gradually tighten it and check that there is no axle backlash in the pedal body (longitudinal and transverse). A minimum tightening should be achieved at which backlashes will be completely absent. The pedal should rotate easily.
  • We put on the washer, tighten the fixing nut and close the hole with a plug.
READ  How to disassemble a chainring wheel on a bicycle

At this point, the pedal lubrication and assembly process is complete, you can install it on your bike. When installed, the right pedal twists into the crank arm clockwise, and the left pedal counterclockwise.

Structurally, a bicycle pedal consists of several parts:

  • The axle is a metal pin that is screwed into the connecting rod. Provides the basis for the rest of the structure.
  • Platform. a plane that contacts the foot and is fixed on the axis.
  • Bearings. the assembly that connects the axle and platform, allowing rotation.
  • Fittings. bolts and nuts that fix all the components of the pedal. Unscrewed during disassembly.

On the platform, the pedals are divided into contact (with fastening for special shoes) and ordinary. The method of removal depends on the type: for contact mechanisms, the fastening scheme is slightly more complicated. Combined options, combining, on the one hand, an ordinary platform, and on the other, a contact device, are no different in terms of dismantling from contact.

How to unscrew the pedals on a bike?

The pedal is a simple part, but due to some mounting features and a very long service life, not every cyclist is able to remove them from their bike on their own. Why remove the pedals?

  • Change them after damage.
  • Pedal lubrication.
  • Connecting rod repair or replacement.

First, let’s look at how they are arranged, what types are there, what features should be considered, what tools to prepare before work.

Required tools and materials

Before removing the pedals, it is necessary to prepare the tool and auxiliary materials that are most likely to be needed.

  • lubrication. the removed parts are recommended to be cleaned and lubricated;
  • cleaning rags;
  • kerosene or solvent. in case the axles do not unscrew or there are large contaminated areas.
  • an adjustable wrench is a universal solution, a small one is desirable, otherwise it will be difficult to get to the nut;
  • open-end wrench for 15. fits almost all models;
  • bicycle kit. in case of emergency;
  • pedal wrench. supplied by manufacturers for non-standard nuts and just in sets;
  • puller. addition to the foot pedals. a standard tool, often supplied by the manufacturer, serves to hold the axle when turning to the side with a wrench.

Some features

Since the system is constantly exposed to the environment against a background of severe mechanical stress, torsional problems can arise. In this case, two methods are used:

  • Soaking the bike pedal in kerosene or solvent to remove as much dirt as possible that is blocking rotation.
  • Heating of the connecting rod and axle. Slight deformation helps loosen the threads and remove the axle.

It is also important to carefully tighten the axle during installation so as not to damage the threads, which is a considerable problem in case of subsequent removal.

Removing the pedals

After preparation, you can proceed to the removal process. For conventional mechanisms, it looks like this:

  • We move the system to the working side. in the direction of the steering wheel.
  • We try to carefully unscrew the pedals from the connecting rod.
  • Remove the plug at the end of the platform, open the lock nut.
  • Unscrew the lock nut, holding the axle at the connecting rod with the second key.
  • Remove the washer (also at the end).
  • Unscrew the cone.
  • We remove the platform from the axle, holding the bearings (it is better to remove them separately, if they are bulk, then put a rag or sheet so that they do not roll far).
  • Pedal removed and disassembled!

It is important not to forget that the left and right pedals are unscrewed from the connecting rod in their direction: on the right axis. the right thread, on the left. the left.

The contact devices are a little more difficult to disassemble, but they will not cause any problems. when twisting and disassembling, a puller is used, which should hold the axis with a small contact pad.

Removing the pedals from the bike is easy enough, but don’t forget about preparing tools and materials, as well as possible problems. The main thing is to keep the entire system in order, since in case of damage or other problems, the inconvenience of using the bike will be very great.

How to remove the sprocket pedal from a bike or right?

  • Install the bike while standing on wheels.
  • We set the connecting rod at three o’clock, in a horizontal position and turn to the front wheel. Let’s start unscrewing.

Helpful! If the stuck pedal cannot be removed using the WD-40, then try lengthening the lever (by putting on a pipe) or use a long wrench.

How to remove the left pedal from the bike?

Look at the side markings to identify the sides. The left one is designated. L, the right. R. The main feature is the thread. The left side unscrews to the right and the right side to the left. Twist, respectively, in the opposite.

  • Rozhkovy 15.
  • Adjustable.
  • Hexagon.

Step-by-step how to remove the left pedal from the bike:

  • The recommended position of the bike is standing. In this position, it will be more convenient to unscrew the pedal. Especially when it takes an effort.
  • We put the connecting rod in the nine o’clock position and begin to unscrew. Do not forget about the direction of the thread. Unscrew to the right.

Helpful! If the pedal cannot be unscrewed, then most likely it has become attached to it. Use thinning agents such as WD-40, diesel oil.

How to remove a sprocket from a bike?

There are two categories of stars on the two wheel. These are masters on the right side of the pedal and slaves on the rear wheel. First, we need to decide what tools we need. The set depends on the category of stars.

  • Connecting rod puller.
  • Rags.
  • Box and open-end wrenches.
  • Hex keys.

In the host system, the most common failure is a small asterisk. Especially if the bike is often used off-road. Driving on a bad road at medium speeds will break the middle sprocket. High-speed driving wears out a larger ride faster.

  • Using a hexagon, remove the axle bolt on the right side, and unscrew the pedal with an open-end wrench.
  • The most common question is how to remove the connecting rod from the bike? This part of the job may seem the most difficult, but in reality it is not. Especially with a puller.
  • We extract the leading system from the bike (the main thing is to remember the sequence). A large star remains on the connecting rod. Small and medium are held together by a spider.

After performing maintenance, we assemble in the reverse order. It is imperative to lubricate the rubbing elements. We tighten all fastening elements (bolts, nuts) strictly in the sequence in which they were removed. After assembly, we check the operation of the pedals. First off without load by lifting the rear wheel. If everything works fine, then you can ride.

How to remove a pedal from a stealth bike?

The largest Russian manufacturer of Stealth produces bicycle bikes ranging from children’s to semi-professional. Bicycles of this brand have gained great popularity in Russia due to the price / quality ratio. But no matter how high-quality the transport is, it must be serviced regularly.

  • Cracking or other noises.
  • Maintenance.
  • Broken pedal.
READ  Simple effective sport of cycling strengthens

A fairly common question is how to remove the pedal from a GT bike? As for the Stealth and GT, the pedal removal process is no different from the instructions above. True, it is worth mentioning that some models of these brands are equipped with contact pedals.

Contact pedals. a device that allows you to fix the rider’s leg with a pedal. The boot attaches to the pedal for continuous contact.

This type of pedal improves pedaling efficiency throughout the entire length and allows you to develop maximum speed.

How to remove a pedal from a bike without a puller?

It may seem that this is not difficult. But you need to have a certain set of knowledge. Before you start, you need to familiarize yourself with its design. It is important to understand that each model may have a different device.

  • Axis. The main part where the rest of the nodes are attached.
  • Platform. The part that makes contact with the leg directly.
  • Bearings. An element that connects moving parts into a whole mechanism.
  • Fasteners (bolts, nuts).

Depending on the features, the platform can be contact and standard. Dismantling the first type is a little more difficult and may need a puller.

Instructions for dismantling the pedal without a puller:

  • Disconnect the pedal with an adjustable wrench.
  • Remove the plug with a flat screwdriver.
  • Unscrew the c-axis nut.
  • Removing the washer.
  • Unscrew the cone.
  • Extracting the platform.

The assembly is carried out in the reverse order, observing the sequence. It is imperative to lubricate the moving mechanisms. Litol, Tsiftim and others can be used as a lubricant. In the cold season, it is better to use Litol. 24.

We looked at the general instructions, but there is a difference in the sides. Let’s get acquainted with each in more detail.

How to remove a pedal from a bicycle, Bicycle repair

How to remove a pedal from a bicycle. After the acquisition is great, it is imperative to timely service the main components. The new transport has such a concept as lapping or running in. The main rubbing mechanisms rub against each other, producing a certain amount of metal shavings.

Such assemblies are usually treated with a large amount of lubricant and metal debris accumulates in it. If you do not carry out timely maintenance, such oil begins to rapidly wear out the mechanisms, working as an abrasive material.

Over time, this renders some components unusable. All parts tend to wear out. The bicycle is no exception. A broken iron horse must be carried to the workshop, or restored on its own.

As practice shows, in most cases, breakdowns are eliminated without the help of specialists. This will save you money and have a rewarding experience. After all, the next breakdown can occur on the road far from home.

How to Remove and Reinstall the Pedals on a Bicycle

Most often, the main mechanism fails, this is the area of ​​the pedals, or rather its inner part. Even if the bike is new, then you need to know the installation procedure for servicing your horse.

Repair of the driven part

Fails due to switching speeds to frequently used ones. There are two types of rear transmission:

  • The ratchet is usually found on budget bikes with a small number of speeds.
  • The cassette is installed on more expensive models and is a more complex mechanism.

With a ratchet, things are much easier. It is monolithic and can be easily removed using a puller and an adjustable wrench. It usually just changes to a new one if the old one is out of order.

  • Remove the rear wheel. Modern bicycles have eccentric mounts. It is much easier to dismantle them.
  • Using an adjustable wrench, unscrew the axle nuts and remove the axle.
  • Install the puller into the grooves of the retaining ring and unscrew it with an adjustable wrench to the left.
  • We attach the whip to a large star and direct it in the opposite direction so that the cassette does not scroll.
  • Unscrew the retaining ring and remove the cassette. Now you can extract the stars (don’t forget about the sequence).

After maintenance, the assembly is carried out in the reverse order, strictly observing the sequence. It is important to wipe all parts well from the old fuel oil and apply new lubricant to the rubbing parts.

Pedal design

This part is a system element that consists of a set of stars, a pair of connecting rods, a carriage, an axle, bearings, a support platform and fittings. To better understand how to remove pedals from a bike, let’s look at each part separately.

  • The axle is a metal pin built into the connecting rod. Acts as a base on which the rest of the structure is held.
  • A connecting rod is a part that on one side is connected to the axle, and on the other. to a freely rotating platform.
  • Bearing Assembly. Design for Smooth System Ride.
  • Platform. a node that acts as a support for the foot during movement and is connected to the axle by means of a connecting rod.
  • Hardware. metal fasteners for fixing all the components of the pedal unit. Completely dismantled during disassembly.

According to the nature of the support platform, there are standard and contact pedals for a bicycle with a mount. The former provide traction with the cyclist’s sole due to the textured surface. The latter contain notches that connect to the corresponding protrusions on special shoes.

There is also a combination pedal option. The latter contain on one side of the platform a regular site, and on the other. a contact.

How to remove pedals from a bike?

First you need to equip yourself with a bicycle wrench long enough to create a suitable lever. The tool is placed in a position parallel to the connecting rod. The key turns in the desired direction (for the right pedal. counterclockwise, for the left pedal. clockwise).

The use of a special bicycle wrench will allow you to quickly unscrew the connections by pushing the lever with your whole body. If the pedals refuse to unscrew, in this case it is worthwhile to warm up the junction of the platform with the connecting rod using a burner. It should be borne in mind that heating is carried out with simultaneous cooling of the metal with water. Otherwise, there is a possibility of permanent damage to the parts.

How to remove pedals from a bike: a practical guide

It may be necessary to remove the pedals from the bike if there is a crunch, knock, or other unpleasant situations while riding. It is quite difficult to eliminate such problems. However, having figured out once how to remove the pedals from the bike, you can perform their regular maintenance without resorting to the services of specialists.

Walking on a two-wheeled vehicle has a beneficial effect on well-being. But at the same time, the muscles of the shoulder girdle are practically not involved. Perhaps this is what prompted the developers to invent a bicycle with pedals on the handlebars. In addition to the uniform load on almost all the muscles of the body, you can move on such vehicles at a more impressive speed. Owners of such iron horses should also figure out how to remove the pedals from the bike.

READ  Scrolling Pedals On A Bicycle What To Do

How to put the pedals back in place?

Before installing the pedals, it is worth first cleaning the threads on the contact connections of the connecting rods and platforms from dirt. Then just take the right pedal and turn it clockwise. Screwing in should first be done by hand and then using a wrench. Finally, the pedal must be firmly tightened.

A similar operation is performed with the left platform and connecting rod. Only the rotation should be in the opposite direction. Finally, it is worth tightening and securely fixing the pedals once again with a hand wrench, which will exclude their arbitrary unscrewing while driving.

Instruments

In the course of work, the following tools may come in handy:

  • Hand wrench. allows access to nuts and disassembly of connections.
  • Bicycle kit. acts as a one-stop solution for a variety of repair procedures.
  • Open-end wrench. suitable for removing pedals on almost all bike models.
  • Special wrench for the system. makes it possible to remove non-standard nuts.
  • Puller. indispensable when you need to work with contact pedals. Allows you to lock the axis when using a hand key.

Eventually

As you can see, dismantling and reinstalling the bicycle pedals is quite simple. However, the process should be approached fully armed, taking care of the availability of all the necessary tools and not forgetting about possible problems that may arise during the procedure.

In order not to baffle yourself once again with the problems of removing and disassembling the pedal structure, it is enough to constantly maintain the functional unit in good condition, regularly lubricate it and clean it from dirt.

Bicycle pedal device

The design of this part is quite simple, which allows you to quickly disassemble the bike pedal in the event that it is necessary to lubricate the bearings or remove dust and sand that has entered the body. So, the bike pedal consists of the following elements:

  • the body, it is also the platform, that is, the surface on which the foot is directly placed;
  • inside the case, a threaded axis
  • bearing, without it there will be no rotation;
  • nuts and bolts, with which the entire structure is attached;
  • end cap to prevent dust from entering the enclosure.

By their intended purpose, bike pedals can be classified as follows:

  • usual for pleasure bicycles, they often consist entirely of plastic, but often there are also metal ones;
  • for mountain bicycles, it is made of aluminum alloy, there are special spikes on the surface of the platform, so that the shoes do not slip and have better grip;
  • contact, with the help of a mechanism, special shoes are attached to the bike pedal itself and can be easily unhooked, in this case special cycling shoes are needed so that they can be attached to the platform;
  • toe clips, a strap mount that is installed on the platform, the toe of the foot is inserted into them and fixed, this type of mount is more often used on sports bike bikes, but on ordinary bicycles now they often install toe clips.

Actually toe-clips can be perceived as one of the types of contact bike pedals. There are models of bicycles on which folding pedals are installed. It is convenient when transporting two-wheeled vehicles and storage. Before riding, you should always check this part by simply twisting it with your foot. It should rotate freely without any difficulty.

Required tools and materials

Before removing the pedals, it is necessary to prepare the tool and auxiliary materials that are most likely to be needed.

  • lubrication. the removed parts are recommended to be cleaned and lubricated;
  • cleaning rags;
  • kerosene or solvent. in case the axles do not unscrew or there are large contaminated areas.
  • an adjustable wrench is a universal solution, a small one is desirable, otherwise it will be difficult to get to the nut;
  • open-end wrench for 15. fits almost all models;
  • bicycle kit. in case of emergency;
  • pedal wrench. supplied by manufacturers for non-standard nuts and just in sets;
  • puller. addition to the foot pedals. a standard tool, often supplied by the manufacturer, serves to hold the axle when turning to the side with a wrench.

Why you might need to remove the bike pedals

From the outside, a bicycle is a fairly simple vehicle, but there are a number of nuances that are associated with certain details, one of which is the pedal. There are situations when the bike pedal needs to be removed:

  • during storage to reduce the size of the bike itself;
  • for lubrication when a creak appears;
  • when it becomes necessary to remove the connecting rods;
  • when replacing the bike pedals themselves.

It happens that the removal of this part is used as an anti-theft agent, but this is a rather exotic way to protect the bike from theft, it is better to use a lock.

All pedals are attached with a threaded axle that is screwed into the connecting rod. The left-hand bicycle pedal has a left-hand thread, and the right-hand one has a right-hand thread. This symmetry is not accidental; without it, this part of the bicycle will simply unscrew during movement.

What tool are pedals removed

When using an adjustable wrench, be sure to pay attention to its thickness. The fact is that the distance between the pedal mount and the connecting rod is not large, and not every adjustable wrench will fit there. Some types of wrenches come with thin jaws that can be used. Open-end wrenches or special pedal keys are great for this operation.

Removal without a puller

How to remove pedals from a bike without a puller? With patience and skill, this is a doable task. The special keys must be replaced with the most suitable counterparts. The use of various adjustable wrenches and other universal tools is allowed. The main thing is that the condition of a sufficient contact surface for the area that will be affected when unscrewing is fulfilled. Before performing work, the contact surfaces are thoroughly treated with WD-40 or another solvent.

  • In order to change to new or replace the connecting rods.
  • When transporting the bike, these parts are removed to reduce the volume.
  • During maintenance. There is a need for cleaning and lubrication. It happens that there is a creak or other suspicious sounds while driving, requiring inspection, and the pedals. maintenance.
  • To reduce space during long-term storage, including winter.
  • So that the bike cannot be stolen. Quite an effective way. But in this case, the pedals should be removed quickly. Therefore, there is a need to carry tools, as well as a storage bag with you at all times.