How to remove reflectors from the spokes of a bicycle

What is a bike reflector for?

This device is based on the simple principle of retroreflection, in which the direction of the beam is reversed 180 degrees. With the help of it, the participant of the movement is noticeable in the twilight and poorly lit times of the day, which reduces the percentage of accidents. The difficulty is that most bicycle brands install reflectors on the pedals, and the rest must be installed by the owner.

The Road Traffic Regulations specify which types of reflectors need to be installed. For auto and bike owners, a similar requirement applies: orange devices are mounted on the side, white in the front, and red in the back. The front reflector can be attached to the steering wheel using a commercially available mount. Side reflector to the spoke, and the rear reflector to the bottom of the saddle.

Bicycle reflectors are made from a variety of materials, ranging from plastic to glass. The body is made of chrome-plated metals, polystyrene and other substances.

How to install, remove reflectors on a bicycle or bicycle wheels

The bicycle is a very convenient form of transport for driving around the city and beyond, depending on its functional features. In addition, it is a wonderful motivator. an assistant for keeping fit. But, as with any type of transport, the rules of safety and behavior on the road apply. One of the possible causes of accidents involving a cyclist is the lack of reflective elements.

What are bike reflectors?

Dimensional reflectors installed in three places (orange, red and white) in good weather cope with the task. to mirror the light falling on them. But what to do when it’s raining or cloudy? Reflectors with LEDs will come to the rescue, which:

  • run on batteries and protected from moisture. Therefore, having entered even a deep puddle, they will continue to work as usual;
  • there are parts on sale that require an additional power supply. Such a luminous element can function from a current generator or by connecting to an ordinary flashlight;
  • the rotating reflector appeared in the public domain less than ten years ago. A flashing light attracts more attention than a continuous stream. For a night track, it has more advantages. Yes, for the price it will come out more expensive, but not by much.

Bicycle reflector lamp

Among lovers of novelties and advanced technologies, LED backlighting is appreciated, it can be wired or wirelessly controlled. The kit includes a remote control and a CD with programs. The device works with the help of a well-thought-out system, which includes from 30 LED bulbs. You can select several dozen graphic images that appear during the movement of transport. The attitude towards this option is ambiguous. On the one hand, it looks unusual and like a kind of visual show, but on the other hand, it can be a distraction on the road.

Wheel illumination on spokes and nipples is one of the tuning options, but it is not cheap.

DIY reflector reflector

There is an even more elementary way, but it will work in addition to the main reflectors. There are accumulative stickers of various colors on sale. Purchase the colors you want and place them in the right places. If you are worried about the appearance of the bike, then they can be easily removed, and, if necessary, new ones can be glued on.

The history of bicycle reflectors

The first reflector was created by a road worker from Great Britain. One day he was returning home late at night and met a cat on the way, whose eyes were shining and they could be seen in the dark. Then Percy Shaw wondered how it is that the eyes of this animal glow when the light hits them? He worked on the idea for a long time, and as a result, he placed fifty created corner reflectors on one of the sections of the dangerous road. After that, the number of accidents on that route dropped sharply. Then the product began to be used everywhere, including attached to bicycles. From the very beginning, the reflector had a second name. cat’s eye.

READ  Replacing The Rear Wheel On A Bike With Speeds

Later, several researchers worked on the creation of a more convenient device that would make transport visible in the evening or at night. There is not even one patent for such inventions:

  • Karl Gladen in the middle of the last century patented a rotary reflector, which was set in motion by means of a stream of air. Thus, no mechanical connection to the wheel was required;
  • John Parker invented the wheel-mounted device. It had a non-standard shape with petals clinging to the needles. From the movement of the mirror surface, the light turned out to be flashing. A significant drawback of the invention is that it was easily damaged, because it was located quite low. And when parking or colliding with even a minor obstacle, the reflector broke or got lost on the road;
  • La Londe went further and designed a very robust element. It coped with the main function, was located high enough (on the axis) and was noticeable to all road users. But he also had shortcomings. For example, clothes got into the device, and for installation it was necessary to remove the wing above the wheel;
  • Mike Curran introduced a closed reflector in 1978. He took into account all the developments that came before him, wishing to release a successful device. And he succeeded. Elements are protected from moisture, grass and other things. In addition, the part is easily attached without additional devices, everything was taken into account in the kit.

How to remove a reflector from the spoke of a bike wheel

Curiously, the cat’s eye has also come in handy in global research. With the help of it, scientists have established the distance from our planet to the moon. In the early 70s, the spacecraft left several corner reflectors on the lunar surface. A laser beam was sent to those points from the ground, and it returned back, after a certain time.

Different opinions and facts about reflectors

Some cyclists already use these stickers and elements on their cycling clothing. Thus, fans of night driving apply additional safety measures. After all, a pair of devices is good, and when they are used in combination, it is even better. Do not neglect your safety. wear a helmet, buy a couple of flashlights to help reflectors, a bicycle headlight, stock up on accumulative stickers. Remember that by law, a cyclist who was driving without reflectors and got into an accident becomes the culprit of the accident (if the motorist followed the rules and drove without exceeding the speed). Because without identification marks, the participant of the movement is not visible on the road. On the forums, there are opinions that all these devices spoil the appearance of a fancy bike. But it is better to think about the fact that these are safety devices, they are mandatory for use and really necessary.

Thus, by applying reflectors, in accordance with the rules, you demonstrate responsibility and care for the rest of the traffic participants.

Reflectors with LEDs

  • Built-in LED design is suitable for driving in poor visibility weather and heavy rain.
  • This design helps the driver to ensure safe driving, and also makes it possible to see the road without the use of additional light sources.
  • Benefits of LEDs in good visibility on the road.
  • Bad weather is not a hindrance to such reflectors, therefore they are a real salvation for cyclists.
  • Often there is a built-in flashlight on the front, which has access to the connection.

Rotating reflectors

The productivity of the reflector can be made by installing a flashing light beam. The idea of ​​developing and improving rotating models began in the middle of the 20th century in America.

A patent was issued by John Parker that contained an invention that clings to the sides of a bicycle. With the help of petals, the device was attached to the spokes and swung the mirror surface due to the work of the spring. As a result, a flashing light came out. This patent has not found wide application due to a number of shortcomings.

La Londe also studied rotating reflectors. He created a device that performed the task of reflecting light, but was bulky and heavy for a bicycle.

The most suitable is a reflector from Mike Curran. He included in the invention movable elements that are protected from the weather, and also do not get tangled in clothing. Also, the reflector is small and easy to attach to the bike.

Where and what reflectors to install?

The most popular reflectors are white, red and yellow. These models are familiar to everyone since childhood, as they are installed on many budget models.

It is up to each driver to decide whether to remove them for replacement or leave them. An alternative to conventional reflectors is a bicycle headlight.

READ  What diameter of bicycle wheels to choose

It is more reliable to use:

  • White reflectors are installed in front of the bike. Some models have a reflector mount on or under the handlebars. If there is no such place, then the reflector is attached independently. Such designs allow the cyclist to be visible on the road by the headlights of other vehicles.
  • Red reflectors are installed at the back of the bike so that overtaking cars can see the bike. They are recommended to be installed under the saddle or on the trunk.
  • Yellow reflectors are used least of all. They are attached to the spokes of the wheel so that the bike can be seen from the sides of the bike. Some cyclists ignore these reflectors because they find them useless. In fact, when driving, the light catches the eye of other drivers, which eliminates the possibility of an accident.
remove, reflectors, spokes, bicycle

How to Remove Reflectors from your Bike Wheel Spoke

On some models, manufacturers initially make luminous inserts with the brand’s logo and name. In this case, you can do without reflectors.

Overall reflectors

Reflectors are considered source of passive radiation, as they can only reflect incoming light in the dark.

If the bike is used mainly for daytime walks, then the bike can be equipped with only two reflectors. They are installed in front and behind. Install correctly with white in front of the bike and red in the back.

Reflectors on the spokes

  • Reflectors on the spokes are required for placement on the sides of the bike.
  • There are: yellow and orange.
  • They are installed on the surface of the spoke, because of this, the bike can have additional weight and cause inconvenience. This is why some cyclists ignore these reflectors.

Reflectors on a bicycle in traffic rules

The law on traffic rules stipulates that each driver must attach a reflector to the vehicle. The color of the reflector depends on the location.

White reflectors are attached to the front, and red and orange reflectors are attached to the sides. Orange reflectors are attached to the spokes of the bike.

Bicycle reflectors: design, varieties, fastening methods

Traveling by transport at night is an extremely responsible and unsafe business. Despite the romance and beauty of the night city, danger can await a person on the road.

remove, reflectors, spokes, bicycle

In order to avoid problems and make your bike more attractive, you need to install reflectors. In this case, the cyclist will be seen much better.

Installation of reflectors. is it possible to ride without reflectors

According to traffic regulations, the owner of a bicycle must ride with reflective elements. By law, you need to install three standard reflectors: white, red and orange.

How to Remove Reflectors from Bicycle Wheels or Spokes without Damage

The procedure for their installation is strictly prescribed in the SDA. This is done so that the motorist can understand exactly where the bike is located and in which direction it is moving.

White is the front light reflector. It mounts on the bike’s front fork or on the steering column.

Rear. a red reflector is considered. It must be placed under the saddle or on the seat post.

Side reflectors are placed on the spokes of the bike. The side reflectors are orange. Many cyclists do not fit this reflector because they do not want to weigh the bike down. But for a normal ride in the city, installing a reflector on the spokes will not affect the bike’s maneuverability in any way. You should only worry about the ride quality after installing the side reflectors when the speed is very high.

The use of LEDs, as well as flashlights, is also spelled out in the rules of the road. These are not required items for a bike, but they are still recommended for use.

Features of the choice of reflectors

When installing reflectors, it is worth considering their size and the material from which they are made. It is best to purchase large reflectors. The choice should be made in favor of plastic models, since the glass is easy to break or deform while driving. Try to choose lightweight models for mounting on the side of the bike.

What are bike reflectors

Reflectors are better known as light reflectors. These are small plates of different colors that are installed on several parts of the bike. Classic models of reflectors do not emit light, but only scatter it when the beam hits them. Inside the reflector there are several mirrors at an angle of 90 degrees. A ray of light, falling into the space between them, is reflected 180 degrees. The reflected beam length is 150 meters. Therefore, for the motorist, the bike becomes noticeable even at long distances, which reduces the risk of an accident to a minimum.

READ  How to disassemble a rear sprocket on a bicycle

Reflectors are made of colored glass. Some models are created with acrylic. Newer reflector models incorporate LEDs to become light sources themselves. The reflector body is a metal mount, sometimes polystyrene is used for its manufacture.

Reflectors have a universal purpose and are a suitable device not only for bicycles, but also for other vehicles. For example, they are suitable for mounting on a motorcycle body.

Reflectors are important elements of a bicycle. Without them, you cannot go on the road at night, as there is a high risk of getting into an accident. The reflective market is seeing ever-new lighting models that will not only be a great reflective element, but also become part of the bike’s design.

How to make reflectors for a bicycle yourself

You can make a reflector for your bike yourself. It doesn’t take a lot of effort.

The easiest way is to use reflective stickers for the purpose of the reflector. Such reflectors are suitable as an additional element to standard reflectors. You can use a wide variety of colors, not only increasing the visibility of vehicles, but also making interesting decorative elements. But it’s best to stick with three standard colors and fit them on the front, side and rear of the bike, respectively. Accumulation stickers can be easily removed from the bike, which is also a plus of using them.

You can also make LED lighting with your own hands. To do this, you need a tape with LEDs, a mount and a power supply. You can install the tape on a separate element of the bike or along the frame of the entire vehicle. After installation, it is imperative to treat the joint with silicone sealant.

Types and varieties of reflectors for bicycle bikes

Reflectors can be divided into conditional groups depending on the way the light is used and the method of their placement.

By the way of using light rays, reflectors can be divided into:

Passive reflectors include standard, classic reflectors. Their principle of operation is to return the light beam. These reflectors are available in several colors: white, red and orange.

Active devices include new generation devices that not only reflect, but also emit light beams. This type of reflectors is clearly visible in bad weather conditions. And the chances of being spotted in fog or snow are greatly increased.

LED reflectors are of the active type. Their principle of operation lies in the presence of several LEDs in the reflector, which operate on an electric current. The only difficulty in using them is the need for a power source. Most often, an LED reflector is connected to a flashlight, since the small power of the batteries is quite enough to recharge the lighting. Another way to generate power while riding is by installing a dynamo. This device generates a constant current. The dynamo is attached to the front wheel of the bicycle.

In addition to LEDs powered by an external power source, there are active-type reflectors with built-in batteries. These most often include small LED elements that are installed on the spokes of vehicles. These are waterproof models of reflectors that are made as light as possible so as not to degrade the quality of driving at high speed.

Stylish rotating reflectors are especially popular. Flashing light has been proven to be most noticeable at night. The movable LEDs are enclosed in a special transparent case, which prevents parts of the bike or cyclist’s clothes from getting into the rotating blade. The reflector starts working when the special wheel is started. In some models, a blinking light appears at the slightest flow of wind.

The latest invention among reflectors is the full LED illumination of the entire iron horse. It works by remote control. This type of reflectors can be either wired or wireless. Typically, an LED strip consists of at least 30 bulbs. The tape program contains several combinations that allow the rider to choose from a variety of graphic designs. The LED backlight looks impressive, but on the road it can serve as a distraction and provoke an emergency.

There are a few basic locations for reflectors on a two-wheeled vehicle. These include the fork, seat post, headset and spokes.

Varieties of reflectors for a bicycle and their installation

Cycling in the evening and at night is quite dangerous due to the invisibility of wheeled vehicles. To protect yourself from a collision with vehicles moving on the road, reflectors on a bicycle must be installed.