How to remove a camera from a bicycle wheel

remove, camera, bicycle, wheel

Removing a wheel from a bike

For convenience, turn the bike over, placing it on the handlebars and wheels. Next, you need to do the following:

  • Unscrew the bolts holding the brake.
  • Remove brakes.
  • Dismantle the wings (if they complicate further actions).
  • Unscrew the retaining bolts.
  • Pull the wheel out of the grooves.

The punctured wheel is dismantled, you can proceed to the next stage.

Changing your camera is a simple process that every cyclist should be prepared for. A puncture on the road, damage to the camera in the forest, or just updating a bicycle wheel. it’s always nice to deal with the problem yourself and quickly deal with the problem, and not carry the bike to the workshop.

Every serious cyclist already carries a repair kit and a pump with him, being ready for any eventuality.

How to glue a bike camera at home

Each cyclist has a strapped-on bicycle first aid kit, which contains the necessary tools for repairs. Consider how to glue a bicycle camera using a repair kit.

How to remove a punctured tube from a wheel

In order to pull the tire out of the rim, it is necessary to pick up its edge with the first “assembly” and take it out of the rim. At the same time, the assembly must be held so that the tire does not end up inside the rim again, and the assembly itself does not fly into your forehead.

How to Remove and Install a Wheel on a Bicycle

After that, with the second assembly, pull out the edge of the tire next to the first assembly in the same way. Do not forget to hold on to the first editing.!

How to Remove and Install a Bicycle Tire & Tube

After that, you will feel that the tire tension is already significantly weakened and you can pull out the assemblies. Now, with the help of one assembly, carefully pull out the edge of the tire along the diameter of the wheel until it is completely free. In many cases, this can be done with your hands.

If the tire tension is still too high after using two assemblies, then the third should be used in the same way.

As a result, you should get that one edge of the tire is completely removed from the rim.

  • Next, you need to remove the camera itself. To do this, remove the nipple and then carefully remove the camera from under the tire.
  • Done. Now you can start gluing the damaged camera or just install a new one.

    How to remove a camera from a bicycle wheel

    Types of velonipples

    This part is designed to pump air into the chamber. Depending on the version, the following types of nipples for bikes are distinguished:

    READ  How To Remove Brake Pads On A Bicycle

    Disassembly

    Those who changed the camera with their own hands know, perhaps, the main problem. this is the bending of the tire bead. Modern tires fit so well to the rim and are so stiff that it is not always possible to do it with your hands.

    Therefore, stripping is added to the composition of many multitool or kits. These are small plastic or metal “spoons” that are inserted between the tire and the rim, allowing you to pry and bend the tire, and then put it back on.

    How to remove a punctured tube from a wheel

    After that, with the second assembly, we pull out the edge of the tire next to the first assembly in the same way. Do not forget to hold on to the first editing.!

    After that, you will feel that the tire tension is already significantly weakened and you can pull out the assemblies. Now, with the help of one assembly, carefully pull out the edge of the tire along the diameter of the wheel until it is completely free. In many cases, this can be done with your hands.

    If the tire tension is still too high after using two assemblies, then the third should be used in the same way.

    As a result, you should get that one edge of the tire is completely removed from the rim.

  • Next, you need to remove the camera itself. To do this, remove the nipple and then carefully remove the camera from under the tire.
  • Done. Now you can start gluing the damaged camera or just install a new one.

    When is it necessary to remove or replace a tire

    You may need to remove your bike tire in the following cases:

    • With a punctured camera. In this case, remove the tire, replace the punctured bicycle tube with a whole one, and then reassemble the wheel;
    • In case of tire wear. In particular, the tire wears out quickly with aggressive driving style;
    • When repairing a wheel of a bicycle, when the camera is simply in the way.

    Is it possible to replace the tire without tools

    There is always a chance of a camera puncture. Removing a tire can be a surprise, so you don’t have any tools with you. It is practically impossible to do this without tools. To replace it, you must have a spare kit if you took it, and you still have some instrument. By default, we will assume that you still took the wheel repair kit for a bike ride. So, you do not have editors, how can you cope with this problem?

    • Lower the camera (as much as possible). It is advisable that the air comes out completely, unscrew the nipple;
    • Squeeze the tire on both sides in such a way until its cord leaves the rim on both sides;
    • Slide the beads of the tire towards the middle of the rim groove. Continue in the same way to advance to the nipple, keeping the tire near it;
    • If everything is done correctly, then pry the tire cord with your finger and remove it from the bicycle wheel in a circle;
    • Now carefully remove the tube or completely replace the tire on the bike wheel.
    READ  How To Match A Tire To A Bicycle Rim

    DIY step-by-step instructions for disassembling

    • Remove the wheel by unscrewing the nuts that secure it to the bike frame. In modern bicycles, this can be done without much difficulty, since they are equipped with a quick release mechanism. In other cases, WD-40 will help.
    • Disconnect the brake pads. When working with the rear wheels, you need to switch to lower gear and remove the chain from the sprocket.
    • Press the valve on the nipple, lowering the wheel to the end. In the case of a tube tire, it is necessary to completely unscrew the nipple, pull the tube “nipple” out, and then remove the tire.
    • Insert 2 mounting blades under the tire at intervals of 10-15 cm.
    • Take 1 scapula and gently move it around the circumference in the opposite direction to the other scapula.
    • Remove tire.

    Important! After removing the tire, you need to make its external inspection, cameras and wheels for defects and damage, check if there are protruding spokes or other sharp objects on the rim that must be removed.

    How to install a camera in a bicycle wheel

    • First you need to check if there are any sharp objects left in the tire that could damage the new or sealed tube. To do this, you need to visually inspect the tire, and also run your hand along its inner side. It is also worth paying attention to whether any spoke or its mount is protruding into the wheel. If in any doubt, you should stop installing the camera.
    • Inflate the camera slightly to avoid damage during installation.
    • Now carefully insert the nipple into the corresponding hole in the rim, and then place the inside of the tire and the entire tube.
    • Tuck the edge of the tire over the entire diameter of the wheel into the rim. Most likely you will be able to do it with your hands. However, it is possible that a part of the edge remains, which is difficult to thread into the rim. Then you should again use the fitting and refuel the tire with it. At this stage, there is a danger of puncturing the camera with the assembly. be careful.
    • Inflate the wheel a little and rinse the tire well so that the inner tube can expand. Then inflate the wheel to the required pressure.
    • Remember to screw the cap onto the nipple. Done!
    READ  How to remove the bearing from the rear wheel of a bicycle

    Camera repair after dismantling

    The tire is removed. Now the wheel needs to be checked. When damage is found, a decision is made as to whether the tubes and tires should be replaced or repaired. In the first case, to restore the integrity of the wheel, you will need a set of tools for the bicycle. The bicycle camera is glued as follows:

    • pump a little air into the chamber and immerse it in water: air bubbles will be visible at the place of the hole;
    • wipe the camera dry, clean the place of breakdown with sandpaper;
    • smear glue on the breakdown site, glue a patch, place it under a press;
    • after the glue has dried, carry out a control inflation of the tire, check if it does not allow air to pass through.

    Now that we have made sure that the tube and tire are in order, we can proceed to the reverse process. the bead.

    Required tools

    If desired, the tire can be removed and replaced without the use of tools (this will be discussed in detail). But, if you follow all the rules, then it can come in handy:

    • Dismantling for a bicycle wheel. It is an oblong shaped plastic plate equipped with a hook;
    • If there is no disassembly, it can be successfully replaced by a key: from a lock or a wrench. As a last resort, you can use a coin;
    • Bicycle wheel removal wrench. In some models, the wheel is not fixed to the eccentric, but to the bolt;
    • Pump. You will need it when reinstalling your bike wheel.