How to raise the handlebars of a bicycle on the stern

Cycling Stealth for kids

This is our (Russian) manufacturer of bicycle bikes of various options, which are distinguished by good reliability and affordable prices. Takes a leading position in the Russian market.

At this age, the formation of a figure in children is taking place, and therefore it is extremely important to choose and adjust the bike correctly. The toddler should not have an unnatural bend while sitting behind the bike and the knees should not reach the steering bar.

Mostly stealth bikes for the little ones (from 1 to 7 years old), equipped with a threaded column. The mechanism is very simple and consists of a nut and a fixing bolt.

For this purpose, a hexagon and a wrench (spanner) will come in handy.

raise, handlebars, bicycle, stern

  • In the central part, loosen the bolt. It is not necessary to completely unscrew.
  • Use a wrench to loosen the lock nut between the frame and the bracket.
  • With gentle movements to the right and left, we remove the steering wheel.
  • We thoroughly clean all contacting elements and degrease to avoid “coking”.
  • Install the bar back and select the desired position.
  • We fix it with a central bolt.

If the bike is already more than a year old, then there is a high probability of boiling of the column.

How to raise the handlebars on a children’s bike, in this case? With smooth movements, it is necessary to loosen it by turning to the right, left. The most important thing is not to make sudden movements. Especially if there are cables or hoses.

Having established a suitable position, we assemble in the reverse order. We fix the whole thing with bolts.

How to raise the handlebars on a bike navigator stealth

Navigator is a range of Stels bikes for kids and teenagers. They have a predominantly threaded column, which makes the crossbar fit easy and over a wide range.

The procedure for adjusting the device without a threaded column is described above.

In addition to adjusting up or down, do not forget about the angle of inclination. Sometimes you can even do just that. This is most easily done if there is an adjustable stem. It is attached to the frame with one bolt and in case of loosening, you can change the angle and re-fasten.

  • We fix the bike securely and unscrew the bolts.
  • Disconnect the steering wheel.
  • We remove the stem from the pipe and turn it over.
  • We fix in the selected position.

If there is no stem, then the adjustment is carried out by loosening the bolts in the center of the steering wheel and tilting it to a comfortable position. Don’t forget to stretch the bolts. Otherwise, the weight of the rider may cause the bar to spin, resulting in a fall and injury.

Also, after assembly, make sure you can reach the brake and shift levers without obstruction. Be especially careful with the cables so that they are not tangled or pinched. If all these manipulations did not solve the problem, you should tinker with the saddle.

How To Raise Bicycle Handlebars

How to raise the handlebars on a bicycle

First, you should familiarize yourself with the types of fit:

  • up or down steering adjustment. This determines the angle at which the cyclist will be positioned and the position of the arms;
  • the angle of inclination is the load on a specific muscle group. How quickly the cyclist gets tired depends on it.

If we take old models, such as the Ural, Sura, Salyut, then it is very simple to adjust the crossbar on them. The steering system was a purely threaded column. Modern ones are great, due to the simplification of design features and lighter weight, they are arranged somewhat more complicated.

How to raise the handlebars on a Stern bike

By the way, this is just below the answer to the question of how to raise the handlebars on a Stern bike. Most frequently asked question.

Speed ​​bikes are equipped with a non-threaded system. The fork is secured by a spacer located in the stem. To adjust the steering bar position:

Fit. On a road bike, the bar is usually attached below the seat. It is this positioning of the rider that will provide less drag, and therefore more speed and energy savings. Optimum seat alignment.

At the same time, there is no difference in age restrictions. But not all parents like this fit and therefore standard vehicles are most often purchased.

By the way, just below will be the answer to the question of how to raise the handlebars on a Stern bike. Most frequently asked question.

Speed ​​bikes are equipped with a non-threaded system. The fork is secured by a spacer located in the stem. To adjust the steering bar position:

Ideally, it should look like this, the suspended front wheel will turn under its own weight. This means the tightening is perfect. In this case, there should be no backlash.

  • We begin to tighten the two hex bolts that fix the crossbar to the stem. Make sure the bar is perpendicular to the front wheel before tightening.
  • We take a sample by riding a little. If the head tube is loose, then you need to tighten the bolt in the center.

But there is another way how you can increase the height of the steering wheel. We will dwell on this in more detail later.

How to raise the handlebars on a Forward bike

Bikes of this company are equipped with both non-threaded and threaded systems. Some have an adjustable stem.

Useful for work: hexagons, if work is carried out with carbon fiber, then it is recommended to use limiters, for some stems T20 or T25 torxes will be required.

In the first version, the height is changed due to the intermediate rings. This was described in more detail above. This bike has two spacer rings and one tapered ring.

The intermediate rings have an average size of 2-3 cm. They change the position of the crossbar due to the installation on top of the stem or under it. All bolts are standard hex wrench.

Keep in mind that the manual does not recommend doing this yourself. You need to contact specialists for help.

In the threaded system, the crossbar is adjusted by changing the height of the stem attachment. To do this, loosen the mounting bolt on the top of the stem. We choose the desired position and fix it with the fastening bolt.

Important! There is a mark on the stem of the threaded column indicating the maximum adjustment level. It is absolutely impossible to raise above this value.

The low head tube lowers the bike’s center of gravity. This increases the load on the front wheel and thus increases traction. But setting the bar too low compromises control over the bike.

How to raise the handlebars on a mountain bike

These Stealth bikes have a very limited range of headbar adjustments. When purchasing such a device, carefully read the dimensions in order to make the right choice. The recommended angle between the body and the frame should be 40. For more detailed information, study the instructions attached to the bike.

To adjust the position, you will have to disassemble the steering system. The steering mechanism on modern mountain models is fastened with several side bolts and one in the center. But it should be mentioned again that the adjustment range of the mountain model is very modest. Some users resort to lengthening the column using special devices.

How to raise the handlebars on a mountain bike: helpful tips

The installation of the steering system in one position or another largely determines the correct seating position of the cyclist. Therefore, the question of how to raise the handlebars on a mountain bike remains relevant for many bike owners. Taking the task seriously can relieve tension from the back and arms, which will improve the overall level of comfort while riding.

Can the handlebars be raised on a mountain bike? It is no secret that the possibility of adjustment and its degree depend on the type of bike and the model of two-wheeled vehicles. Modern mountain bikes allow extremely limited adjustments.

The higher the steering column is, the more difficult it is to control the bike on climbs, and the lower it is, the more problematic it is to ride on a flat track. In the latter case, the cyclist improves aerodynamics, but at the same time slightly impairs the view for himself.

How to lower the steering wheel?

The task is quite simple to cope with. You just need to do the following:

  • The center fixing bolt at the top of the steering column is loosened. It is not recommended to completely unscrew this element, since a special wedge-retainer may come off, which will lead to unforeseen consequences.
  • The steering wheel is lowered to the desired level, aligns with the front wheel.
  • The center bolt is tightened. It should be fixed in such a way that the structure does not give backlash.
READ  How To Install A Brake On A Child Bike

about mountain bike Stels

How to raise the handlebars on a Stels mountain bike? Domestic bikes Stels are of wide interest from consumers, as they are one of the best solutions in terms of price and quality. The question of how to raise the handlebars on a mountain bike of this brand often arises from buyers. Some cyclists find it impossible to get the job done. However, there are still several possible solutions.

Mountain bikes of the popular Stels brand do not differ in a wide range of raising and lowering the steering column. Therefore, when choosing a bike of a specific model, it is better to immediately dwell on the optimal frame number, which most closely matches the parameters of the body when the seat is set to the optimal position. It is desirable that the position of the cyclist’s back is at an angle of approximately 40% in relation to the frame.

If you have difficulties with how to raise the handlebars on a mountain bike “Forward”, “Stealth”, “Merida” or models of other brands that are in demand in the domestic market, you should once again look into the bike’s passport. It is in the technical documentation that the optimal method for adjusting certain parameters of two-wheeled vehicles is indicated, and valuable advice on maintenance is given.

How to raise the handlebars on a mountain bike?

To adjust the position of the steering column on your bike, you first have to disassemble it. Only such a solution allows you to change the position of this structural element.

As a rule, the steering system on modern mountain bikes is fixed in the side section with several bolts and one. in the central. The presence of the last mount allows you to eliminate backlash, and other holders fix the steering wheel at the required height.

To figure out how to raise the handlebars on a mountain bike, unscrewing the side elements will allow. After completing the operation, it remains to move it to the desired height. In this case, you should be guided by special marks, exceeding the level of which is prohibited by the manufacturer.

How to raise the steering wheel?

As noted above, not every bicycle allows you to adjust the height of the steering column within significant limits. Therefore, many owners of two-wheeled vehicles are trying to lengthen this structural element in alternative ways, in particular. resort to the use of special devices.

What is a bicycle handlebar extension? Such a means is made in the form of a tube, which is built into the fork rod of the bike and allows it to be lifted up. Since most modern steering systems are equipped with non-adjustable stems, they must be changed when installing an extension.

Saddle position

It is worth paying attention to the adjustment of the saddle. When the nose of the saddle is raised over the measure, the person will fall back, when it is lowered down, he will slide. The optimal position must be selected based on the person’s physique.

A horizontal saddle position is considered the best option. The saddle is tilted horizontally with the nuts that secure the saddle to the frame. By loosening the fixation, the most comfortable position is selected. Then, in this form, the saddle is fixed with the help of previously loosened fasteners. [attention type = red] Important! When adjusting the saddle horizontally, it is assumed that the distance between the elbow and the fingertips should be equal to the distance from the front of the saddle to the stem. [/ Attention]

With the most insignificant skills, it is not difficult to solve the problem of adjusting the bike according to your own parameters.

Integrated model

A kind of semi-uninterrupted. It differs from her in the absence of a cup. Installed in a frame tube, rarely used.

How to raise the handlebars on a mountain bike for comfort?

Mountain bike, in comparison with other types, is designed for off-road riding, therefore, the structures are made of materials of increased strength. For a convenient and comfortable movement, the athlete’s posture is important. In this regard, the question of how to raise the handlebars on a mountain bike worries everyone.

Threaded column

This model is found on Soviet and inexpensive professional bicycles. The design is simple. the steering axle fits into the column and is bolted in place. Robust and reliable model that significantly reduces the weight of the bike.

The disadvantage of such a column is that other settings (tilt angle) are impossible in this version.

To change the position of the axis, a number of actions are performed:

  • the fastening nut is unscrewed (if necessary, the same operation is carried out with the steering tube nut);
  • the axle is installed at the required height;
  • fastening nuts are tightened;
  • it remains to test the axle height and you can enjoy the ride.

How to adjust a headset | Halfords UK

Height adjustment

If you are just choosing a mountain bike, keep in mind that most models provide for adjusting the height of the handlebars for each rider. To find out how to do this correctly, you need to clarify which column is on the bike.

Steering wheel adjustment

Correctly raising the handlebars on a mountain bike is very important. This is especially true when it has been stored at home or in the garage for a long time. The higher the handlebars are raised, the greater the load on the muscles of the rider.

  • Normal or zero is considered to be level with the bike saddle. This position is suitable for leisurely walks.
  • The position below the saddle lowers the body of the person, makes the posture more streamlined, than reduces the resistance of oncoming flows.
  • The position above the saddle is called high.
  • Centering. The steering wheel must be perpendicular to the front wheel.

[attention type = yellow] Worth knowing! An important factor in height adjustment is the rider’s height. For people with a height difference of 20-30 cm, different heights of the steering wheel will be required. [/ Attention]

Semi-integrated column

A rare model. Consists of a cup and bearing, which are located inside the frame. Allows you to lower the steering wheel as low as possible.


This column model is the standard on modern mountain bikes. The design is heavier and harder than threaded. The height in the threadless version is not adjusted using an axis, but due to special spacer rings, which are added or removed from the pipe freed from removal.

  • unscrew the nut on the pipe cover;
  • unscrew the mounting bolts that secure the steering axle;
  • carefully remove the stem with the stem;
  • install or remove spacer rings;
  • we return the take-out to its original place;
  • we tighten the fastening bolts, close and fix the cover behind them.

It is important to adjust the direction of the front wheel stem. When adjusting the height of the axle, it is easy to move it.

To bring the direction to the correct position, you must:

  • loosen the mounting bolts;
  • pull up the axle to the desired level;
  • tighten the bolts.

What is the adjustment of the handlebar of a bicycle

There are several ways to adjust a bicycle handlebar:

  • by the height of the steering wheel. this value determines the slope under which the body of the cyclist and his arms will be while riding;
  • by the angle of inclination of the handlebars. the angle at which the handlebars are set / adjusted depends on which muscle groups will work during the ride, how quickly the cyclist will get tired.

How to properly adjust the handlebars in the indicated directions? Everything is strictly individual. a lot depends on the style of riding a two-wheeled vehicle:

  • if the cyclist just enjoys a leisurely walk, overcomes distances without time pressure, then the steering wheel of the vehicle rises, the angle of its inclination becomes small;
  • if the cyclist goes in for sports, he has to overcome different distances for a while and demonstrate his speed capabilities, then the handlebar will lower, and its angle of inclination will increase.

How to determine the position of the steering wheel? The “starting” point is the bicycle saddle. if the handlebar is located above it in level, then the latter is adjusted to increase, and if the handlebar is located below the level of the saddle, accordingly, the adjustment was low.

How to change the height of the steering wheel

As a rule, the height of the bicycle handlebars is adjusted using special settings on the steering column. they are present in almost all models of a two-wheeled vehicle. But first you need to understand what type of steering column is installed on your specific bike:

How to raise the handlebars on a mountain bike

The height and direction of the bicycle head tube provide comfort during vehicle operation. It is believed that a high rudder setting should be used in cases where a calm ride / walk is expected, but a lower rudder setting is useful for those who are used to overcome wind resistance and reach some peaks.

Threadless column

In general, this type of headset is standard on mountain bikes. This mechanism is somewhat heavier and more complex than the previous type of bicycle headset, therefore the process of increasing the height of the handlebars will be somewhat more difficult. The handlebar is attached to the tube on mountain bikes using an additional element. the stem, which is used when the height of the handlebar changes.

You can change the height of the steering wheel with a threadless column as follows:

  • Unscrew the anchor bolt with a hexagon (a kind of cover at the top of the pipe).
  • Remove the tightening bolts that secure the stem to the head tube.
  • Remove the steering wheel with the stem. this must be done slowly and very carefully.
  • Add staging rings to the pipe, or remove unnecessary ones. it all depends on whether you need to change the height of the steering wheel in the direction of decreasing or increasing.
  • Set the stem to its original place.
  • Tighten the tightening bolt first, then the anchor bolt.
READ  Why you need a bicycle stem

Please note: sit is necessary to tighten the bolts when changing the height of the handlebar on a threadless column carefully. on such bicycles, with a strong tightening, the parts become unusable. After completing the procedure for adjusting the height of the handlebars on a mountain bike, it is imperative to adjust the level of the handlebars in relation to the front wheel of the vehicle. it is very easy to displace the structure. If it is necessary to slightly correct the position of the steering wheel, then the anchor bolt and the mounting bolt are slightly unscrewed, the steering wheel is straightened to the desired position, and then the bolts are tightened again.

Threaded column

This type of steering column mounting can be found in professional bicycle models, as it greatly facilitates the entire structure of the vehicle. Surprisingly, all bicycles of the old (Soviet) model were equipped with a threaded steering column.

How to Raise Handlebars on a Bicycle

The design is very simple. the steering tube is located inside the column, tightened with nuts, thereby connecting to the steering gear. It is this simplicity that allows you to change the height of the bicycle handlebars in literally a matter of minutes:

  • We loosen the fastening nut (it is located at the very bottom of the pipe, directly above the frame).
  • If necessary, loosen the lock nut on the head tube.
  • We raise the pipe to the required height (in some cases, it may be necessary to install an additional pipe. a kind of steering wheel extension).
  • We tighten the fastening nut first, then the lock.

Additional steering wheel adjustments

As a rule, additional handlebar settings are present only on bicycles with a threadless column. we are talking about mountain models.

The first thing that can be adjusted is the steering angle. This is done using a hexagon. they simply loosen the bolts on the stem, which makes it possible to scroll the steering tube to the required position. This adjustment is necessary for a mountain bike with highly raised, complex handlebars. the position of the cyclist’s hands will need to be changed quite often.

The stem deserves a separate mention. it is a key element of the handlebars with a threadless column. There are several types of removal:

  • vertical extension. with its help, the height of the handlebars of a mountain bike is increased;
  • horizontal offset. allows you to compensate for the length of the frame when adjusting the steering wheel;
  • corner offsets. they help to place various body kits, gadgets on the vehicle.

How to increase the height of the handlebars on a sports bike

If the bike is used for daily measured movement, and the owner is not an athlete, but wants to have a stylish modern bike, then riding it is not very comfortable, your hands are tense all the time, your back gets tired. And, most importantly, you won’t even be able to raise the steering wheel a little, the design of most budget bikes does not allow this.

This is exactly the problem owners of a Stels Aggressor bike may face. This is a good fat bike, with an excellent price-performance ratio. There are, of course, small drawbacks, but they are insignificant for the price. For example, a chain flies from a standard sprocket during gear shifting. This problem is solved by replacing the star, after which the speeds are switched perfectly. Another important drawback is the steering wheel too low. Its bend also does not allow to correct this problem by turning the steering wheel around its axis, as it is too small. The stem is short and also not configurable.

Long rides on this bike are exhausting, the back is tense, the arms are too. It is impossible to raise the steering wheel by standard means, it is not regulated in any way.

And yet there is a solution to this problem. Chinese engineers, apparently listening to the complaints of cyclists, have found an inexpensive but effective solution. They invented and launched the so-called handlebar extension. This is a sleeve made of aluminum alloy, 12 cm long. The kit includes the sleeve itself, 3 or 4 adjusting rings, an extended screw, a plastic cover and a rubber plug. You can buy it on Aliexpress, the cost of the kit is about 8 When buying, you need to check the diameter of the hub. it must match the size of the diameter of the bicycle fork.

This design increases the height of the handlebars by 7 cm, which is sufficient for a comfortable ride. Hubs come in a variety of colors. sports bike owners can customize the set to their liking.

It only takes a few minutes to upgrade your bike. To do this, you only need two hex keys of a suitable diameter.

First of all, unscrew the central screw of the steering wheel.

Then loosen the screws on the stem and, holding the bike, remove it from the fork. At the same time, there is no need to unscrew the fasteners of the cables.

Then an extension sleeve is installed on the fork and fixed with four screws.

Put on the handlebar on the extension cord and select the number of adjusting rings so that the handlebar stem is as high as possible.

Then the steering wheel is removed, the adjusting rings are installed on the sleeve, the steering wheel is put on again and, aligning it with the wheel, the screws are tightened.

Finally, insert the elongated screw and screw it onto the plug. It remains to install the rubber plug on the screw head and you can go.

After this upgrade, the handlebars are higher than the seat level, the riding position is more comfortable, and the ride is more comfortable. And the appearance of the bike has improved, it began to look larger. Riding a modified bike resembles riding on good old Soviet bicycles such as Desna or Aist. The fastening reliability is sufficient and there is no hint that it will break on any large bump.

If the owner wants to raise the handlebars even higher, like a cruiser bike, then instead of the standard stem, you can put an adjustable stem, which is also sold on Aliexpress. By increasing the stem angle, the handlebars can be raised a few more centimeters. But this part will cost a little more, start from 12

In this way, with the power of additional devices, you can increase the height of the handlebar of a sports bike. If you liked the article, share it on social networks.

Review: Children’s bike Stern Rocket 16. Far from perfect, but you can ride

Color. blue, designed for children 4-6 years old, steel body, quite dense. The most interesting thing is that it does not fold, and it was brought to us in assembled form, with small additional wheels already screwed on and a bell purchased separately. From the docs. brochure with information on several models of Stern bicycles, receipt. There were no keys, no glove compartment (maybe I was behind the times, but earlier all this was present in the kit).

And I immediately had a question: will I raise the seat with the steering wheel by unscrewing it with my teeth? Fortunately, the house has the necessary keys.

The steering wheel, as is already clear, can change its position, its height. It is curved, comfortable for a child, and has rubber handles for brushes. But, to be honest, they are so soft and trustless that they may very likely fall apart soon.

As I already wrote, the frame is steel. By the way, that’s why the bike is heavy, even for me. The seller said that almost all of these bicycles now carry significant weight. Let’s go back to the frame. It is not high, just for a child, and it will not be difficult for him to throw his leg over the frame to climb on the “faithful horse”.

The body is soundly mounted, there are traces of adhesions, but well painted.

The seat is also worth paying attention to. It is clear that it changes height depending on the height of the child, by simple manipulations with unscrewing the screw with a key that is not included in the kit, this can be done.

The seat itself is not soft, rather narrow, I would say slippery. Although the child does not complain about it, and feels quite comfortable on it. But before the seat was at least covered with leatherette!

Pedals. I don’t really like them either, some kind of “through”, not very durable material. They spin well, wide, comfortable for a child’s foot. They don’t like it anyway. On the other hand, both pedals have a pair of reflectors. The foot brake is operated by pressing the pedal back.

By the way, in some places at the joints you can see pieces of film, as well as white grease, in which it is easy to get dirty, and you can’t go without it either. The chain seems to be spinning, the bike has a completely smooth ride, the child does not strain much. The protective wing allows you to keep both the chain itself and the legs and clothes from damage.

The wing pattern matches the bike, harmonizes perfectly. But the main thing that protects.

The bicycle’s wheels are inflatable, thick, and have spikes. Simple tread pattern:

Tires can be inflated through the nipple using a pump that is not included in the set. But it doesn’t matter if the house has everything, including a foot pump. For a month of riding, I have not yet had to inflate the wheels. By the way, there is data on the tire that may be required in case of replacement:

READ  How the hub is disassembled on a bicycle

Now I want to draw attention to the fenders above the wheels. It’s just something! They are so flimsy, as soon as you touch them with your foot or hand, they change not only their position, but also their shape. Terribly simple!

They are screwed down with one screw. Every time I’m afraid it might fall off. Rear trunk missing.

Yellow reflectors are prudently screwed onto the wheels, under the seat. red, in front. white. The pedals are also equipped with small yellow reflectors. Protection. primarily.

Overhead pillows, which are on the steering wheel, inside made of a material similar to foam, or something else (I do not know what is called), are fastened with Velcro on top. They can be removed if desired.

The bike is replete with stickers on the body. But something tells me that they will not stay in their places for long, since there is already a prospect for their gradual peeling off. It’s a pity, of course, the quality does not shine.

The main thing for my child at the moment. this is the presence of two additional wheels. So far, unfortunately, we cannot skate without them. They are screwed on well, the fasteners seem to be without flaws.

When riding a bike, they rattle. You can hear them from afar! But if you unscrew them, then the bike ride is soft and inaudible. But by their sound, the child can navigate when riding on two wheels, and when on four. The main thing is to put the small wheels not evenly, but slightly forward or backward, so that the impression of “rocking” is created. By the way, the bike does not have a footrest, and if you remove the small wheels, the bike will be unstable.

To summarize, I can give the bike a minus four. Not only is it heavy, but there are also flaws in its design. Hinged fenders over wheels. just an imitation of them. The thundering little wheels could have been quieter. In addition, at a sharp turn, he is unstable (four-wheeled): my child fell off him a couple of times, dodging obstacles. Stickers. short-lived joy, so it’s better to either glue them, or peel them off right away. I was also upset by the lack of keys in the kit.

Overall, the bike is okay. For a couple of years, however, until the child grows up. Its without additional fittings. I will still recommend it. But personally, I like our scooter better.

Semi-integrated column

The design of the semi-integral steering column is similar to the threadless steering column. The main difference is that the top and bottom bearing cups are inside the frame. This means that with such a design, there are practically no protruding elements. Therefore, the steering wheel can be lowered to a sufficiently low level.

Such models are used by athletes over long distances. Because the low level allows for high speed and also provides better aerodynamics.

Since the manufacturing process of a semi-integral speaker in production is more complicated than other types of speakers, the cost of bicycle models using it is much higher.

To adjust and change the height of the steering wheel, use the same method as for the threadless steering column.

Threadless column

For models with a threadless column, the height level is adjusted using special spacer rings, the width of which varies from 5 to 30 millimeters. Add extra rings to increase the height. To reduce the level, remove unnecessary.

Algorithm of actions for changing the height of the handlebar on bicycles with a threadless column:

Make sure the stem is positioned correctly. If necessary, loosen the bolts and adjust the handlebar on the bike directly to the wheel as it was before the height change.

In order to make sure that the stem is securely installed, follow these steps:

  • Apply the front brake.
  • Turn the stem with the rudder in different directions.
  • If the rod of the fork begins to move inside the column, then slightly loosen the side bolts and tighten the upper bolt (“anchor”) more. This will eliminate the gaps between the spacer rings. Then tighten the side bolts back.

Before riding the bike, make sure that all parts are secured sufficiently securely so that they will not move while riding.

Threaded column

Most often, a similar design is found on Soviet models, as well as on such modern brands as Stels or Stern. Height adjustments are easier on bikes with this column than on other bikes. To adjust the handlebar height on a Stels or Stern threaded column bike, follow the step-by-step instructions:

  • Secure the bike for easy follow-up.
  • Loosen the top stem bolt, but do not fully pull it out of the hole.
  • Roll the handlebars sideways and try changing the height. If it doesn’t give in, then use a hammer. Make a couple of hits on the steering wheel near the bolt so that the wedge moves away from its “usual place”.
  • Adjust the handlebar to the desired height. Be careful! The stem should not be higher than the mark indicated on it. It is usually denoted as “Stop”, “Maximum” and other marks.
  • Screw the bolt back in. Make sure all parts are securely installed before riding.

Adjusting the handlebar height on a bicycle: how to do it right

Cycling should be comfortable and enjoyable for the traveler. For the trip to be as enjoyable as possible, it is necessary to provide a comfortable environment. To do this, after the purchase, it is worthwhile to adjust the handlebar and seat height on the new bike.

So the cyclist will find the most comfortable position and will not feel muscle pain during the ride. Experienced cyclists know firsthand about discomfort in the back, neck and arms. Therefore, they attach great importance to how to correctly adjust the height of the handlebars on the bike.

Professional cyclists set the handlebars to a low level relative to the saddle on the bike. Because the lower the center of gravity is, the greater the traction force and the greater the speed an athlete can develop over a distance.

What is the height adjustment for?

Before determining what height should be at the handlebars on a bicycle, it is worth considering the riding style, the person’s height, as well as the most comfortable body position.

First, adjusting the handlebar height correctly on both mountain and road bikes is essential for comfort. Body aches and muscle fatigue can cloud any travel plans. Therefore, it is worth taking a responsible approach to this issue.

Secondly, the way you ride your bike affects how you adjust the handlebar height correctly.

  • For lovers of high speed, as well as for driving in mountainous areas with rough terrain, it is worth lowering the steering wheel below the seat. This will increase traction on the road, which in turn will make it easier for cyclists to get around.
  • For long journeys and everyday walks in the city, it is better to raise the handlebars above the saddle, or adjust to one level. This position will provide the most comfortable conditions.

There are several ways to adjust the stem on a bicycle, depending on the type of steering column. Steering column types:

  • Threaded column;
  • Threadless column;
  • Semi-integrated column;
  • Integrated modification.

Let’s take a closer look at each type, as well as the algorithm of actions for adjusting the steering wheel height.

Variety of steering wheel location

Before you learn how to properly adjust the handlebar on a bicycle, you should familiarize yourself with its types of location and choose the most comfortable option for riding.

  • The handlebars and saddle are at the same height. Standard for cyclists.
  • The handlebars are placed below the saddle. This position allows the athlete to achieve maximum speed.
  • The handlebars are above the saddle. A great option for girls, children and the elderly on long trips.
  • The steering wheel is perpendicular to the front wheel. This position is used by professional athletes in competitions and training.

It is important to periodically adjust the handlebar height on your child’s bike. During the winter period, the child grows up, so the previous parameters may no longer suit him. Every 20 centimeters of growth already requires changes.

Handlebar height adjustment must be done on mountain, road, city and stunt bikes.

In addition to changes in height, the adjustment of the steering wheel relative to the wheel is carried out in cases of gaps or gaps in the steering column of the bicycle. That is, in case of malfunctions of the constituent elements.

Tilt and stem adjustment

The stem angle can also be adjusted and adjusted to suit the bike owner. The correct handlebar height and the correct angle of inclination on the bike are selected individually and depend on the following characteristics:

  • Riding style.
  • Owner’s height and age.
  • Personal features of the driver.

Changing the tilt angle is easy enough. This can be done only on threadless types of steering columns.

In order to adjust the angle of inclination of the stem, follow these steps:

  • Unscrew the bolts located on the stem.
  • Find the right angle.
  • Fix the bolts back.

The tilt angle adjustment depends on the stem type. There are three main models:

  • Horizontal. This stem model increases the length of the bike frame.
  • Vertical. This model increases the level of the handlebar height.
  • Corner. A similar stem is used to be able to attach additional devices and accessories.