How to inflate a bicycle wheel without a pump

How to inflate wheels without a pump

by Denis 12.03.2020, 10:43 updated 12.03.2020, 10:47 4 Г 0 Comments

There is such a situation: the wheel is flat, but there is no one and nothing nearby, and the Wax does not have a compressor in its car. In such a situation, the motorist will be delighted even with a bicycle pump. It’s like an emaciated traveler in the desert. a circle of water. Stop lamenting, it’s better to talk about this article about Honor and find out how to pump up a wheel without a pump, since there are methods. Here are just some of these methods. sheer myths, and some we do not recommend you to practice due to the enormous harm to health, and even life.

You can also take the wheel by hitchhiking or by bus to the gas station, where it is often possible to check the pressure and pump up to the standard. In the absence of all these possibilities, you need to read the material further. these are the methods that will be proposed:

Aerosol. The pressure in the can is usually 1.8-2.8 bar. It is not particularly difficult to connect it to the nipple. The main thing is that the substance in the container cannot dissolve the rubber. The ideal here would be to pump a wheel from a can of compressed air. they are usually used to blow through office equipment. All is well, but a wheel needs 20-25 liters of such air, which is equivalent to several boxes of cans. In general, specifically “computer” compressed air does not suit us, other cans. maybe we need to understand in detail.

The explosion of gasoline vapors in the wheel does help, but not in everything. If you need to throw the bead ring over the hump. this is one thing, but pumping up the wheel is quite another. Please note that in many online videos, it is recommended to first unscrew the spool. I wonder why this is? It was experimentally found that pumping the wheels with an explosion helps to increase the pressure by only 0.2 bar. In general, this method does not suit us either.

Fire extinguisher. this solution clearly claims to be unusual. However, even a six-kilogram cylinder with the spool turned out helped to increase the pressure by only the same 0.2 bar as in the previous paragraph.

Turbocharging. here a hose is connected to the air path after the turbocharger. However, between the compressor and the inlet valves, the inflatable pressure in the line is low for pumping the wheels, and even gas is useless here. This refers to a regular turbocharged car, not a sports car.

Exhaust system. here it is important to be able to attach a hose to the exhaust pipe in such a way that the exhaust goes all into it. Then the pressure will be enough to fill the wheel, and even more than one. When the exhaust system is sealed, then by giving the gas, you can actually normalize the pressure in the tire. But we will immediately warn about the dangers of such an idea for a catalytic converter and even corrugated elements.

Other wheels. from them, a certain percentage of air can also be transferred through the hose. But you will have to fiddle too much, since the valve mechanism will hinder your aspirations in every possible way. By unscrewing the spools, you run the risk of deflating a few more wheels. Suppose you succeed, but then the lack of pressure in the other wheels is guaranteed. At best, 75% of the norm will remain there.

Here you must first assemble a hose with two tips, like compressors. Then the whole idea still has the right to be implemented.

In general, all these unconventional methods are best performed by trained and knowledgeable people. You don’t want to hurt your car and yourself even more than a flat tire, do you? Therefore, the only correct solution is to check the pump in the car.

Read later Add to favorites Add to collection Complain

How to inflate a wheel without a pump

First you need to understand when and why such work may be required. There is usually only one spare in a car, if two wheels are punctured at once, the second will have to be pumped up in order to continue driving. This raises the question of whether there is a pump. It may not be there at the right time, or it will be faulty. Well, if a situation arises in the city, the damaged wheel can be taken to the tire fitting in a taxi, outside the city this will not always work.

In this case, an ordinary fire extinguisher in the car can come to our aid. With its help, the tire can be inflated in just a couple of minutes. Please note that you will need a carbon dioxide fire extinguisher for such work, other varieties will not work.

Carbon dioxide, getting into the usual environment, turns into a simple gas CO2. It is supplied under pressure, which allows gas to be injected into the tire. Tubeless rubber is pumped up in just a couple of minutes. If a camera is used in the design, it is more and more difficult, most likely, it will not work to fully pump it up for technical reasons.

  • We collect the adapter. To do this, we connect the sleeve and the tip to the hose. It is better to fix them on the hose with clamps, if there are no clamps, make a substitute from soft wire.
  • We connect the sleeve to the fitting.
  • We unscrew the cap from the nipple of the wheel, and put the tip of an impromptu compressor on it.
  • By pressing the fire extinguisher lever, we feed carbon dioxide into the tire. We stop as soon as the tire is fully inflated.

All tires are inflated without a pump. The car is ready to continue the journey.

How to inflate a wheel without a pump? Ways and nuances

Sometimes a tire needs to be pumped up right now, but there is no pump or compressor at hand. The question arises, how to pump a wheel without a pump, is it possible. Yes, it is quite possible to pump air into the tire without using pumps. Experienced drivers know a large number of ways to get to the tire service if the wheel is suddenly flat.

What are the nuances

The method described above is not optimal, it should be used only when the machine is not equipped with a compressor. Visit a tire shop as soon as possible. Blow out the wheel there with compressed air. Carbon dioxide, reacting with water, forms corrosive substances that damage rubber and disc.

If necessary, you can inflate the wheel without special tools. It is enough to know how to do this job.

How to repair a tire yourself

How to remove and install wheel caps

Tire repair kit: when it comes in handy, composition, how to use

Tire break-in. what is it and why is it needed? rules for running in new tires

inflate, bicycle, wheel, pump

How to get rid of a bulky pump on long trips or how to inflate a wheel without a pump?

A pump for long bike rides is a very important thing, and cyclists taught by their own bitter experience know that it is even irreplaceable! Who will help if a wheel puncture occurs on a bike trip or just far from home? And in general, what to do in this case?

Experienced cyclists or cyclists who are not accustomed to winding circles around the house will give you the following tips if you ask them to:

Take self-adhesive patches with you.
2. Take a spare wheel tube with you if you are going on a bike trip for several days, with an overnight stay.

Take the pump with you. But there are some problems here. The first is that, as a rule, powerful bicycle pumps, although not very large compared to car foot analogs, are nevertheless not quite convenient for transportation.

Especially considering that you will have to use them, at best, twice a season, the rest of the time the device will lie in ballast in a backpack or hang on the frame of your bike, and this is excess weight, the competent distribution of which in long exhausting trips literally on weight of gold.

The second problem is diametrically opposite. Compact hand-held bicycle pumps are really small and lightweight. But you will damn everything in the world while you pump a tire that has deflated to zero with such a pump. Perhaps you can catch up with the atmosphere, but then everything will be very, very difficult. It’s just a hell of a job pumping a tire with such a pump. Whoever tried it will understand. In general, a half measure and in some cases will not be suitable for full use.

READ  What is the Diameter of a Stealth Bike Wheel

Aerosol cans

Attaching a can (any) to the nipple is not so difficult. The pressure inside the cylinder is 1.8-2.8 bar. It is important that the contents do not dissolve the rubber or solidify, such as construction foam.

Here, of course, cans with compressed air are good, designed for blowing, for example, office equipment. But the internal volume of a wheel of a small car is about 20-25 liters. For pumping, you will need several boxes of cans. Unacceptable!

How to inflate a wheel without a pump

Automotive brake system

Next, we have to use the braking system from our own car.

With its help, you will definitely not be able to quickly pump up the tire.

The point is as follows. It is required to connect the valve from the tire to the union of the master brake cylinder on the vehicle. Before this, it is imperative to empty the brake fluid reservoir itself. Then the driver needs to start actively squeezing the brake pedal to the floor, releasing it and repeating these movements. The brake is pumped in the same way when the brake fluid changes. Just be prepared for the fact that such a pumping will take a whole lot of time and a huge amount of effort.

The acceptability of this method is rather low. Although in terms of safety and efficiency this is one of the best options when a compressor or hand pump is not available.

Exhaust system

If most of the methods presented will work on a bicycle, but are unlikely to significantly help on a car, then with the next option everything is somewhat different.

Here you need to connect the hose to the exhaust pipe and wheel. The engine can actually create the necessary pressure inside a sealed system, that is, the tires of a car. It’s easy enough to work the gas pedal properly.

But this method is recommended only as a last resort. Otherwise, you risk spoiling the catalyst. or an exhaust system. Eliminating the consequences will be very expensive.

Aerosol cans

Some car enthusiasts recommend using aerosol cans to inflate a flat tire. Connecting them to the tire nipple is not that difficult.

It must be borne in mind that often the internal pressure in such cartridges is from 1.8 to 2.8 bar. How much or how little of this depends on the particular wheel that needs pumping. When choosing an aerosol, consider the contents of this can, its composition. Some substances can corrode rubber or harden. That is, the option using construction foam is unlikely to work. Only in the most extreme case, when at the place of arrival the wheel will be sent to a landfill.

Most effective from the cans used for purging. They are filled with compressed air.

But here, understand one simple thing. The internal volume of a car wheel is approximately 20-25 liters. Yes, with the help of compressed air in cylinders, in theory, you can inflate a wheel without a pressure gauge and compressor. But then you have to spend a few boxes of spray cans.

There are many articles on the Internet on the topic “How to pump up a wheel without a compressor.” Which of these techniques are effective and safe, and which should not be resorted to, says the Za Rulem expert.

A completely banal way is to turn to professionals, that is, truck drivers. The fact is that any truck with pneumatic brakes can supply dried and purified air with high pressure through a hose, which a thrifty trucker always has with him.

Now at many gas stations there are points for inflating tires, and, perhaps, the easiest way is to drive a wheel to it on a hitchhiking and also return back to your car. If all of the above did not work, then read about the techniques that we personally tested for effectiveness:

How to inflate tires with a fire extinguisher

As a rule, all motorists keep a pump in the trunk. But there are times when the pressure in the tire has dropped, but for some reason there is no pump. If this happened on the highway, where the flow of cars is significant and you can always stop a passing car for assistance, or there is a service station in the immediate vicinity, then it is not as scary as getting stuck in a forest where there is not a soul, but there are dozens of them to the nearest settlement kilometers.

But there is no limit to human imagination, so the craftsmen came up with a way to pump up tires using an ordinary car carbon dioxide fire extinguisher. But this venture is not an easy one and not the safest one. To do this, you must have a special hose that will serve as an adapter between the fire extinguisher and the nipple. The hose can be disconnected from the damaged compressor by providing it with a threaded bushing so that it can be screwed into the fire extinguisher connection.

As a rule, carrying an OU-2 fire extinguisher with you is a mandatory requirement for fire safety. Its pressure is about 5 megapascals, the volume is up to 2 liters of extinguishing agent. If you press the trigger guard, then the substance from the fire extinguisher will quickly rush outward, turning into gas. This method will help you inflate the wheel in minutes. But such actions cannot be called safe, therefore it is not recommended to use it. As soon as carbon dioxide passes from a liquid to a gaseous state, strong cooling of both the extinguisher itself and the hose is obtained. Therefore, after such inflation, the first thing to do is to get to a gas station or to a tire fitting, bleed carbon dioxide from the wheel and pump in the usual air.

For more information on this method of inflating the wheel, see the video:

Bicycle tire inflation rate

If you are able to get a quality mountain bike from the best manufacturer, then the tire pressure at the proper level can be maintained for a couple of months. But it all depends on how often you will use it and what distances you will cover on it. The quality of the road surface will also be of great importance. But gradually the tires will go down and they will have to be inflated so as not to damage the rim.

If you exceed the permissible pressure, the tire may burst. Therefore, it is necessary to constantly check the pressure with a pressure gauge. Mountain bikes should be checked a couple of times a week and road bikes after each trip.

If all these rules are observed, then you can travel long distances without fear of adventure and getting only pleasure and pleasure from walks. With the correct inflation of the wheels, you will not have a chance to drag your iron horse home on you.

How to inflate a bicycle wheel without a pump

There are several ways to bring the tire pressure, if not to the optimum level, then at least to the minimum allowable. To inflate the wheels to the desired value, an inflow of air under pressure is required, and this is not always achieved.

  • We use a vacuum cleaner. There are models that not only draw air in, but also blow it out. A thin hose is required to connect this device to the bicycle nipple. A positive result will be only if it is possible to achieve the tightness of the system. To do this, you can use rubber pads, harnesses, all kinds of rags.
  • Bottle pump. To do this, you need to take two plastic bottles, one of which will act as a cylinder, and the other as a rod. We separate the bottom from one bottle and pass a small diameter hose through its neck, which is connected to the camera. The second bottle is inserted into the first bottle, thanks to which air is pumped into the hose through the cylinder. To achieve tightness, neck and hose, we use a sealant or rubber gasket. It will not be possible to inflate the tires strongly this way, but you will most likely be able to get home.

The process of making a homemade pump from two bottles

What should be the pressure in the tires of the bicycle

To properly inflate your tires, you need to understand which roads your cycle route will take. If you are sure that only solid and high-quality road surfaces await you, then it is worth inflating the tires to an indicator of 3.5 atmospheres. If the pressure is less, then you will not see a comfortable trip.

If the main route will run on a dirt road, then try to set the tire pressure at the level of 2.5. 2.7 atmospheres. The softness of the wheels levels out bumps and unevenness of the ground, makes it possible to sharply turn and brake during descents.

READ  How to fix a figure eight on a bicycle with your own hands

Almost all bicycle tires have numbers on the sides that indicate the minimum and maximum pressure thresholds. If you don’t want to understand all the intricacies of tire inflation, you can just take the average value and pump up to this limit, or better. a little more than average.

The numbers on the tire indicate the pressure values ​​for which it is recommended to inflate it.

For more information on the pressure in bicycle tires, how to inflate them correctly, and what features and conditions you should pay attention to, see the useful

How to inflate a bicycle wheel without a pump

Fans of cycling know firsthand what a puncture is during an active pastime. The unexpected can happen in the middle of the forest, or along the highway. Unfortunately, not every car owner will stop to help in this case, and a full-fledged pump takes up too much space, which is not enough anyway. There are several methods for inflating a flat tire, in the absence of a reliable and familiar pump. All bicycle owners, without exception, should familiarize themselves with them.

How to pump up your MTB tyre without a air pump!

How to determine the pressure level in a bicycle tire

There are several methods for recognizing what pressure the tires are and whether there is a need to inflate them. There is an old and well-tried method, and it is as follows. We take the tires and squeeze them with our fingers. If the rubber practically does not allow itself to be compressed, then the pressure in it is normal. But this method should be treated carefully. There are people who have remarkable strength, so it will not be difficult for them to squeeze rubber in half, even under pressure. And there are more frail ones who are not able to even squeeze a little almost empty tire.

Manual Bike Tire Pressure Test

The most effective way to check tire pressure is to use a pressure gauge. For this, the number of pump strokes is considered to achieve the desired pressure level. The result is remembered so that later, when the pressure gauge is not at hand, you can independently determine the sufficiency of the tire pressure.

Determining the tire pressure of a bicycle using a pressure gauge

It is necessary to understand that it is precisely such an indicator as tire pressure that affects the travel speed, the quality of grip and, as a result, your safety. It is generally accepted that the average pressure for all bicycles is 2 atmospheres. But if your path constantly passes on an asphalt surface, then it can be equal to 3.5 atmospheres. If you are traveling on a dirt road or in the fields, then the pressure should be on average 2.7 atmospheres.

To determine the pressure indicator using a pressure gauge built into the pump or an individual one, the following steps must be taken:

  • place the bike so that the nipple points down;
  • unscrew the protective cap;
  • install a pressure gauge to the tongue of the nipple or connect a pumping tube to it and tighten the valve;
  • the device will display the current value of the tire pressure.

What can happen due to the fact that the tire pressure will be more or less than the norm:

To avoid negative consequences, you should constantly monitor the tire pressure. There are optimal pressure readings that will allow you to travel on bicycles with greater comfort and health benefits. These data are shown in the table:

Why you need to maintain pressure inside the bike wheels

I would like to draw your attention to the following fact. Wheels are almost impossible to pump as quality tires have a fairly high upper limit. Therefore, if you are full of strength and energy, then all the same, excessive efforts will not be enough to break the covers from excess air. The worst thing is to ride an iron horse with flat tires. This can lead to punctures and other damage and subsequent major repairs or the purchase of a new bicycle tube.

It is necessary to understand that driving on flat tires just because you do not have a pump, and you cannot figure out how to pump them up, is unacceptable. Insufficient pressure in tires deteriorates their cushioning ability. If you drive on a perfectly flat road, you will not see problems immediately. But if your path runs over rough terrain, through holes or off-road, then the presence of “eights” on wheels will soon be provided to you. This will damage the rims.

Possible consequences of cycling on flat tires

If you lead a healthy lifestyle, prefer to spend your free time in the fresh air, carry out regular cycling, then you should take care of the presence of a bicycle pump. Anything can happen on the road, and it is simply necessary to be fully armed so as not to spoil your rest and mood.

compressor

How to pump up a ball without a needle? Contact any of the car services in your locality. the workers will help you free of charge or for a nominal amount. Do not ignore the tire shops: there will definitely be powerful compressors for inflating car tires. One but: there is a risk of pumping the product with air, which will lead to its deterioration or even explosion.

A compressor is a piece of equipment from which air escapes under pressure. Therefore, this is an excellent answer to the question: “How to pump up a ball without a needle and a pump?” If possible, it is recommended to carry out the procedure together: one person will turn on and off the compressor, and the second will hold the ball and press the cord, controlling the air flow. The hose with the nozzle is pressed tightly against the valve, after which the device turns on at full power. It must be decontaminated immediately as soon as the surface of the ball becomes hard. That’s all!

Let us also draw your attention to the fact that many models of car compressors have special nozzles for pumping air into balls.

syringe

How to pump up a ball without a needle. volleyball, basketball, football? Use a large medical syringe! This is for the most extreme case, since the method is quite exhausting. you will spend about 2 hours on the procedure.

As with the second method, you will need to blunt the needle, otherwise you will damage the nipple and the ball will deflate all the time. Which syringe to choose? The bigger, the better:

  • Dvadtsatikubov really pump up the ball in 30-40 minutes.
  • A ten-cubic syringe will make you pore over the ball for an hour to two.

Before starting the procedure, we recommend that you lubricate the nipple with silicone grease. this will protect it from damage from the imperfect needle from the syringe. The procedure is simple: insert the needle into the hole, pressing the syringe lever, release the air. Then remove the instrument, return the lever to its original position and repeat the procedure.

How to pump up a ball without a needle: 4 easy ways

Almost every ball. soccer, volleyball, children’s, basketball, gymnastics. is only usable when properly inflated with air. Therefore, a special pump, a needle and sometimes even silicone grease are often sold with it. But let’s imagine that all this is simply not at hand. How to pump up a ball without a needle? We have selected for you several effective folk ways.

duct tape, syringe needle, bicycle pump

  • Take the needle from the syringe. the first step is to grind its sharp tip against asphalt, brick, stone, curb or a special knife. Overly sharp, it will easily pierce the nipple, making the ball unusable. The best will be a needle for blood transfusion systems. it is thick, durable, does not bend.
  • At the second stage, you make a kind of adapter from electrical tape. 10-12 layers of it are enough. They need to be wound tightly so that the air does not come out during inflation.
  • How to pump up a ball without a needle? Attach your invention to your bike pump and get started.

there is a needle, but no pump

We have figured out how to pump a ball without a needle (basketball, volleyball, football, etc.). But what if you have one (or you made the needle yourself), but there is no pump? We offer the following instructions:

  • The pump will be replaced by an ordinary plastic soda bottle. As a last resort. a tight plastic bag without holes.
  • Now you need to screw the needle into the cork of the container or solder it. This will be the adapter. Check that it is breathable.
  • Then you need to lubricate the ball nipple with silicone grease.
  • But now you need to pump with your hands (or, if it is convenient for you, with your feet) air into our homemade pump, from where it will enter the ball through a needle.
READ  How to Remove a Tire From a Bicycle Wheel

other methods

  • If you did not find a medical syringe, then its needle can be replaced with an empty refill from a regular ballpoint pen.
  • If you only managed to pump up the ball a bit, then you can restore its firmness and elasticity like this: just hold it in hot water for a while. From this, the air inside the product will heat up, which will expand, which will complement the jumping effect.
  • Silicone grease for nipple treatment can be replaced with machine oil.
  • The needle can be attached to the stopper of a plastic bottle for a homemade pump with a glue gun.
  • Instead of a compressor, bicycle pump, bag or bottle, you can use a regular rubber medical bulb.
  • A compressed air cylinder, car spare wheel or garbage bag can also act as a pump.

So we sorted out all the available ways to pump any ball with a valve with air, if there was no pump and a special needle nearby. Go to a car repair shop, wield a medical syringe, build your own tool. choose what works best for you.

You can inflate a bicycle wheel without a traditional pump

How to get rid of a bulky pump on long trips or how to inflate a wheel without a pump?

A pump for long bike rides is a very important thing, and cyclists taught by their own bitter experience know that it is even irreplaceable! Who will help if a wheel puncture occurs on a bike trip or just far from home? And in general, what to do in this case?

Experienced cyclists or cyclists who are not accustomed to winding circles around the house will give you the following tips if you ask them to:

4 Ways to Inflate Your Tire Without a Pump

Take self-adhesive patches with you.
2. Take a spare wheel tube with you if you are going on a bike trip for several days, with an overnight stay.

Repair with patches can be done without removing the wheel. it is enough to identify the puncture and disassemble the tire, pull out the camera and get to the hole to fix the problem.
However, be sure to pack a set of hex keys and an open-end wrench in your backpack to help you remove the wheel if you need to replace the camera with a new one.

Take the pump with you. But there are some problems here. The first is that, as a rule, powerful bicycle pumps, although not very large compared to car foot analogs, are nevertheless not quite convenient for transportation.

Especially considering that you will have to use them, at best, twice a season, the rest of the time the device will lie in ballast in a backpack or hang on the frame of your bike, and this is excess weight, the competent distribution of which in long exhausting trips literally on weight of gold.

The second problem is diametrically opposite. Compact hand-held bicycle pumps are really small and lightweight. But you will damn everything in the world while you pump a tire that has deflated to zero with such a pump. Perhaps you can catch up with the atmosphere, but then everything will be very, very difficult. It’s just a hell of a job pumping a tire with such a pump. Whoever tried it will understand. In general, a half measure and in some cases will not be suitable for full use.

How much does such a set cost??

As we said earlier, with an adapter and a balloon. But we advise you to purchase more advanced options, with a pressure control valve. with its help, having pumped up the required pressure, you will not waste the leftovers and will be able to use them in the future at the next puncture (the main thing is, do not forget to take a spare cylinder on your next trip).

It’s also nice if the adapter is threaded. All pressure will go to the chamber and not to the environment.

The cans themselves also cost different amounts of money. As you can see, three cartridges for 16 grams of C02 will cost around 350 rubles. For 25 grams. 750 rubles for three cartridges in a set. Provided that you still need to manage to pierce three times during the cycling season, these pressure stores will last for a long time.

If you want to take it to a more advanced level, here are a few features that can help make your device more comfortable to use:

Pressure gauge. So that you know how much CO2 has gone into the tire (the thing is certainly handy, especially when you first get to know the device).

A shroud or sleeve to protect your hand and fingers from the hypothermic fitting. Even frost will appear on the metal when the device is in operation. You can get cold burns (frostbite). However, you can work with the device with gloves.

How to inflate a wheel without a pump?

What to do? Take advantage of modern developments and pump up the chamber not with air, but with carbon dioxide, CO2.

How to do it? It is very easy and simple: to take a special pump, which does not even look like a pump, but is an ordinary compact small can with CO2 pumped into it under pressure and an adapter for a Schrader valve (car type) or Presta (bicycle nipple).

In general terms, the option looks like this:

But there are different interpretations on the topic: with larger cans, more beautiful design, and so on.

After all, a CO2 cartridge is just carbon dioxide pressurized into a compact container. There is no fundamental difference in what you pump into the tire of your bike. there is no air, nitrogen or CO2.

At the same time, the tire inflation rate is simply phenomenal. Five to ten seconds. and the tire is inflated! In the example, of course, a small road camera was used, but from the practice of using such a device, it can be argued that even a medium-sized cylinder of 16 grams can easily be enough to inflate a 26 “wheel of a country bicycle with a fairly wide tire and a capacious chamber to a pressure of more than 3.5 atmospheres.

And a 25-gram can is enough, most likely, already for one tire of a newfangled fat bike, especially since the pressure there needs very little. Probably seen such bicycles with very thick tires.

Instructions for use again:

Connect the bottle to the pump adapter.
2. Screw / slide the pump tip onto the nipple.
3. Press the trigger (if with a valve) or press it against the nipple.
4. Monitor tire inflation. It should be well fenced, and the camera should not bite anywhere between the tire bead and the rim, otherwise you will have a sudden and very unpleasant surprise in the form of a strong BAM!

P. S. By the way, some manufacturers recommend not driving on carbon dioxide for a long time. It passes through the rubber faster and escapes from the chamber. Option is to deflate it and pump air.

P. P. S. Perhaps, in the case of carbon dioxide, tubeless tires on a bicycle will help. The rubber is thicker there, which means there will be less pressure etching, and it is definitely more difficult to puncture on a tubeless. Not bad as an option!