How to Hang a Bicycle in the Garage

Table of Contents

How to hang a bike in the garage. Winter bike storage in the garage. Garage Community on DRIVE2

I offer a variant of simple and cheap hand-made mounts for winter storage of bicycles. they allow you to save space in the garage.

Bicycles are placed on walls and ceilings. In my case, the garage is 3 x 6 and besides a car and a heap of rubbish it can hold 6 more bicycles! At the same time, you can walk in the garage when even a car is parked in it.

hang, bicycle, garage

Under each of the wheels, a metal corner is screwed to the wall with two screws.

safety harness. tested. holds if the bike accidentally jumps off somewhere.

Two bicycles on the ceiling. Wheels rest against the corner (already in the garage). The crossbar between the bicycles is insurance in case a hook on the ceiling (aka anchor with a hook) decides to take a walk.

The safety bar has been tested. the bike holds without problems. For skeptics, I can say that the wheels will not bend during the winter, since the main load is on the hook in the ceiling. Lego wheels are lifted by hand.

I screwed an additional plate to the corner so that if the wheel suddenly lowers, so that it does not jump off the corner

the child’s bike is suspended on a piece of broken cable. the cable is clamped under the weight of the bicycle. For convenience, the steering wheel is turned. Pedals removed and stored in a bag under the seat.

I can assure skeptics that bicycles have been stored this way for years. Nothing fell anywhere.

Who also has something to brag about, post photos in the comments.

Good luck to everyone on the roads and full tanks!

DIY bike garage

A bicycle garage is a small structure in which you can place one, or better, several bicycles, the inventory necessary for their maintenance: keys, screwdrivers, a pump, spare tires. A detached small garage allows you to save space in an apartment or house, protect the bike from the influence of weather conditions.

The article will tell you how to independently build a bicycle garage on your site.

Bicycle storage features

When purchasing a modern bicycle, many people have a question. where is it better to store it? Many keep bicycles in their apartments, having adapted a corridor or balcony for this.

The advantages of such an arrangement of two-wheeled vehicles are:

  • reliable safety than on the landing, and even more so, just on the street.
  • In the apartment, the bike is not affected by the harmful atmospheric phenomena that are present on the non-insulated balcony.

Tip: Do not store your bike on the balcony. Here it is susceptible to corrosion, thermal deformations, which can reduce the strength of the frame structure and increase the risk of breaking it when descending a mountain or when driving on uneven slope.

There is not always a place for a bicycle in an apartment where it will not be source of irritation, create inconvenience and even contribute to injury when it accidentally falls on its leg.

Many in apartments create different types of hooks to hang the bike on the wall or from the ceiling. This can reduce the severity of the problem, but only to certain limits: for example, no ceiling in the house will be enough when there are several bicycles for all family members.

It helps to solve the problem of lack of space by transferring the product to a car garage, but this option is possible if there is such a room, and even not far from home. But even in the garage, it is necessary that the bike takes up a minimum of space, does not interfere with the placement of a set of summer or winter tires for wheels (see Storing wheels in the garage and all about it), stocks of oil, tools and parts prepared for repair.

There are many different ways to store bikes in your car garage:

  • Using a variety of hooks.
  • Mount-lift, as shown in the photo.

Fixing the bike to the garage ceiling

  • two brackets with blocks are screwed to the ceiling;
  • a rope passes through them;
  • an additional two blocks with hooks for attachment under the handlebar and saddle hang on the rope.

Pulling the free end of the rope lifts the bike up to the ceiling. This option is suitable for a sufficient room height.

Placing bicycles on a rack near a wall

  • wall racks with several sets of hooks located at different heights are attached to the wall with special brackets;
  • rubberized hooks, which protects the frame from damage;
  • the upper crossbar of the bicycle frame is installed on them;
  • it is more difficult to attach ladies’ bicycles to hooks without a top bar and trick structures with a beveled frame.
  • Wheel hook. In this case, the bike is held by the wheel and not by the frame. Such storage allows you to reduce the occupied space to a minimum: the bike is located vertically, and a large number of products can be suspended in a relatively small angle.

Fastening bicycles to the wheel

Disadvantages of such storage:

  • the option is not suitable for all models, especially those with hydraulic brakes;
  • local load on the rim reduces its symmetry.

But on such hooks, additionally equipped with pendants, you can hang helmets, suits.

Store bicycles in your own safe

To store a bicycle, a room height of up to 1.5 meters is sufficient, an area of ​​up to two square meters.

This free-standing small garage allows you to:

  • Significantly save space in a residential building.
  • Protect the bike from the harmful effects of weather conditions.

However, a bicycle garage has such advantages only on the site of a private house or summer cottage.

Tip: For residents of apartments, you should not install a booth in the yard, it can easily be hacked by thieves.

In closed or well-guarded courtyards, where bicycles are used by many residents, several bike boxes can be installed. Each garage has a number, it is locked with a unique lock and its own key.

The advantages of such storage of bicycles are:

  • The area in the apartment or the area at the entrance is vacated.
  • No need to drag the bike to your floor, even in the elevator.
  • Protection from cold and all kinds of precipitation, which does not provide storage on the balcony.

Storage of bicycles on the site in the courtyard of an apartment building

Tip: To protect your bike from severe frost, you should buy a regular bicycle cover or sew it yourself from a warm cloth.

Box garages can be:

  • Winter. This is an ordinary booth, locked from the outside with a key. When purchasing a ready-made garage, it can be insulated from the inside. upholstered with foam rubber. In this case, the room will cool down less and not heat up so quickly, which reduces temperature drops, which means that thermal deformation of the structure will not threaten.

The trouble with this is the appearance of moisture, it will be well absorbed by the insulation. It is very easy to bring moisture into the garage space: by rolling through puddles and mud and after that leaving the bike in the garage.

  • Summer. This is an open booth with a canopy, its price is insignificant. The best option is the installation of metal walls and the manufacture of a polycarbonate roof. In appearance, this is a miniature bus stop designed to store a bicycle in dry and warm weather near an apartment building. This is an additional design for those who do not want to bring it into the house or put it on the ground.

Summer option reminiscent of parking

An interesting option is a garage box. It is an elongated structure that has a retractable open body for bicycles. The drawer is pushed in and then closed with a key. It is convenient to store the bike in such a bicycle garage at any time of the year.

How to build a bike garage

You can build a mini bike garage from a simple old cabinet.

To build a garage from scratch you will need:

  • Small diameter pipe, length from 1.5 to 2 meters.
  • Metal sheets.
  • Concrete mortar.
  • Door hinges.
  • Lock (see Garage lock: which is better).
  • Welding machine.

Metal bike garage

Work instructions:

  • The dimensions of the future garage are being measured.
  • A small recess is made around the entire perimeter.
  • Pipes are driven into the corners, which will make up the frame of the garage.

Tip: It is better to install six pipes, which will facilitate the installation of sheets on them and increase the strength of the structure.

  • The floor is carefully poured with concrete mortar.
  • Metal sheets are attached by welding to pipes. over, they should fit snugly enough to each other and to the floor.
  • The internal joints of the walls and floor must be filled with concrete or cement mortar.
  • A large sheet is laid on the walls from above, which will be the roof of the structure.
  • You can do it differently:
  • weld on transverse metal poles, several pieces;
  • weld sheets on them.
  • The door is being installed.
  • Hinges are welded to the opening and to the door itself. In this case, it is important to maintain the correct distance between the hinges, for its installation.
  • The lock is being installed.
  • Interior design.
READ  How to remove a wheel from a bicycle forward

It’s not difficult to build a bicycle box with your own hands, but it will help in this video, but it is better to purchase a ready-made safe. It is much more convenient to store a bicycle in such a garage, it will not deteriorate on the street, it does not interfere in the apartment. It doesn’t make much sense to use a special garage to store folding bicycles.

Securing your bike in the garage

Axlgrad. 06/21/2011

For many of us, in addition to the car in the garage, a bicycle also takes up space. and not only does it take, it also gets in the way. creepy. In my case, one of the walls has a ledge, from the beginning the builders laid bricks across, and from the middle of the wall. along. From the beginning I thought about making a shelf, but as a result, this ledge became a support for the bicycle wheels. Whoever has a flat wall, and I think this is a large part of the audience of this WONDERFUL site, you can, in theory, make it from a bar or something else that will be at hand.

The bottom line is simple on the podium for the wheels, put the bike. Due to the pedals and the steering wheel, you cannot press it tightly against the wall, and it is in a slightly tilted state, but this seems to be nothing and does not really interfere. Just above the bike, I drove in an anchor with a hook at the end (concrete ceiling). A chain is thrown onto the hook, which goes around the bicycle frame making a loop and is fastened again to the chain with a carabiner. So that the chain does not scratch the frame, I passed it through the pipe insulation.

30 unconventional ways to store your bike

Tips, Decor, Workshop, Accessories, Interior

Click “Like” to read Make-Self.net at

How many times have we wondered where to store the bike, and especially when the season ends. The garage seems to be the perfect place to store your bicycles, but our beloved two wheels might feel better around us, even more so if you don’t have a garage. And when used correctly, they can be a wonderful decorative element for any interior. We offer you 30 unconventional ways to store your bike.

INTERESTING: 27 Lifehacks for organizing space in the garage

INTERESTING: 25 Unique Wall Gallery Ideas

INTERESTING: 40 Masterpieces of furniture from old cars

INTERESTING: 35 industrial style bedrooms

Instead of leaving the bike in the hallway, you can create a highlight of the interior out of it. Hang on the wall and frame with a decorative baguette, make a simple stand, or use your bike as a hanger. It all depends only on your imagination, and we will help you light it up. Enjoy.

If the season has passed, then the bike can be used as a hanger. Pallets. as a podium for bicycles. You can use ordinary hemp to create an unusual bike stand. Or use an old saddle and handlebar to create a unique suspension.

Click “Like” to read Make-Self.net at

Reviews of moto and bicycle equipment, useful articles about repair and operation

How to hang a bike on the wall?

Mount the bike to the wall. a convenient way to free up space and order in the garage or on the balcony, this method will help to arrange several bicycles at once, thereby protecting them from damage.

Hang the bike

Decide how high the bike will be. On the floor or in the space above the floor: This is the easiest way to hang and remove your bike, but it won’t save space compared to others. If you use force when lifting the bike, then the height is optimal for you. Between the floor and the ceiling: a bike suspended high on the wall will free up space and allow you to pass under it without moving it from place to place, despite the fact that you still have to bend. You can remove your bike with little effort. Hanging from a ceiling or curtain rod: This option is space-saving, but it takes more effort to hang or remove the bike. If the ceiling is high enough, you can walk freely under it. You need to be tall enough to remove or hang the bike, otherwise inconvenience will arise.

Decide how the bike will be positioned on the wall. Find a suitable spot for your bike and see where you will stand while hanging and removing the bike. The frame is parallel to the wall: this method will allow you to place the bike parallel to the wall. The method is suitable for placing one or two bicycles. Bicycle wheels must point downwards and the frame is perpendicular to the wall: this method takes up less of the wall but more room and also requires more clearance between the wall and the bike. If you want to hang your bike in a corner, next to a battery or refrigerator, this is the best option and also the most efficient way to suspend multiple bikes. Note: If you hang your bike perpendicular to a wall, the wheels should be facing the wall and the frame should be vertical. This will allow the bike to roll up the wall and hook the front wheel by turning the handlebars if the hook is positioned correctly Ceiling: If you suspend the bike from the ceiling, the wheels must be facing up, otherwise it will be difficult to remove or hook the bike.

  • Determine what material the walls are made of. If the wall is gypsum or plasterboard: use a discontinuity detector to determine where to hang the bike. If the wall is wooden: you can screw in the hook. If the wall is stone or brick: you need a drill and drill. suitable diameter.
  • Buy and install mounting elements

    Find a beam or frame post if you plan to hang your bike from the ceiling. To do this, it is necessary to use a discontinuity detector. If the ceiling is already finished, look for a row of nails along the paneling or seams and take measurements to decide where to attach the metal. If you have an assistant, have them hold the bike at the level where you are going to hang the bike. All you have to do is put the marks. Pre-drill the holes for the mounting screws. Make sure the holes are in the middle of the frame beam or stud. Use larger screws (# 10) to mount the hook to the ceiling than to mount it to the wall. Attach the selected hanger items and test them. Hang and remove the bike several times to ensure that it is secure and well-planned Note: This step is especially important for children, you must be sure that the child can remove and attach the bike.

    Suspend the bike using the bike handlebar

    Attach the specially designed mounts to the handlebars and turn them upside down. As a mount, you can use the stem, which will hold the handlebars with handles. Old style stems are found on older bicycles and can often be found with a handlebar. They fit into the handlebar hole in the frame and resemble an “L” tube, with a handlebar clip.

    Buy or find a threaded steel tube and wall flange that fits the stem. This tube should match the stem diameter so that you can slide the tube into the mounting hole effortlessly, the flange itself is attached to the wall.

    Screw the steel tube into the flange. One side should hold the stem securely, screw the other side into the flange and tighten tight. You may need to adjust the stem to keep the handlebars straight.

    Attach the flange to the wall. Find a timber frame post. Use a screwdriver to attach a flange that already has a handlebar and stem.

    How to hang a bike in a garage for storage: very convenient

    A bike. the thing is very convenient, practical and useful. And those who have at least one such type of transport in their family know how difficult it is to attach it so that it does not interfere. But there are several ways to arrange bike storage.

    Under the ceiling

    A bicycle, if not folding, is very inconvenient to store anywhere. Even at home in the hallway, even in the garage, it will still take up a lot of space due to its design. But only a few try to use all the available space in the room rationally and pay attention to the ceiling. Here, except for the lamp and, perhaps, the mezzanine, there is nothing. So there is enough space for the bike under the ceiling, and its storage will be the best option for saving space.

    Types of structures

    Hang the bike from the ceiling of your home or garage. a practical solution to free up space. This is quite simple to do than it might seem at first glance. The bike can be suspended with ceiling-mounted hooks or with a more sophisticated pulley / pulley and rope system made specifically for this purpose. But whichever system you like, you can build it yourself if you set yourself the goal of freeing up space without getting rid of the bike.

    Shelf hook method

    Hanging a bike from the ceiling is very simple using a familiar object. hook, or rather, hooks, since there will be two of them, and they must reliably support the weight of the bike.

    Determine the location of the structure

    First, find a ceiling beam that serves as a load-bearing support. How to do it? Climb the ladder up and just tap the ceiling. Where there is no beam, the sound will be dull. But if the sound changed to a sonorous one, which is obtained when hitting a solid object, then you have found a ceiling beam.

    If you can’t find a place to attach the ceiling hooks to hang your bike in this way, you can try hammering in nails. If it is impossible to drive in a nail, then you are in a beam. Yes, you will then have to carry out cosmetic repairs on the ceiling, especially if luck does not immediately favor you, but the place will be chosen correctly. Be sure to be as careful as possible when standing on stepladders or stairs.

    First hook

    Visualize how you hang the bike on the hooks. Make a note where you think one of the hooks on the ceiling joist should be. Now in this place you need to make a test hole to make sure that the intended hook is secured. If the hole does not crumble and will be able to withstand a heavy load, then nothing else needs to be done. But if the beam crumbles, then you will first have to install a reliable cement-filled dowel into it.

    The most convenient way to drill vertical holes in the ceiling is to use a cordless electric drill. Remember to wear safety goggles and a respirator to keep building dust out of your eyes and respiratory tract. Once the dowel is in place, you can screw in a sturdy hook capable of supporting the weight of the bike. Yes, do not be surprised, it is best to buy hooks with a capacity equal to the weight of the bike, not half of it. suddenly something goes wrong one day and the bike hangs on one hook.

    READ  How to swing wheels on a bicycle

    At what distance to mount the hooks?

    So, the bike will be suspended by the wheels. Therefore, in order to determine the distance at which it is necessary to mount the hooks from each other, you need to know the distance between the wheels. You can measure it with a tape measure, measuring from the center of one wheel to the center of the other wheel. It is best to carry out this manipulation several times so that the calculations are more accurate, otherwise the meaning of the construction with hooks is lost.

    How to hang a bike in a garage for storage: very convenient

    From Masterweb

    A bike. the thing is very convenient, practical and useful. And those who have at least one such type of transport in their family know how difficult it is to attach it so that it does not interfere. But there are several ways to arrange bike storage.

    Under the ceiling

    A bicycle, if not folding, is very inconvenient to store anywhere. Even at home in the hallway, even in the garage, it will still take up a lot of space due to its design. But only a few try to use all the available space in the room rationally and pay attention to the ceiling. Here, except for the lamp and, perhaps, the mezzanine, there is nothing. So there is enough space for the bike under the ceiling, and its storage will be the best option for saving space.

    Types of structures

    Hang the bike from the ceiling of your home or garage. a practical solution to free up space. This is quite simple to do than it might seem at first glance. The bike can be suspended using ceiling-mounted hooks or a more sophisticated system of pulleys / pulleys and ropes made specifically for this purpose. But whichever system you like, you can build it yourself if you set yourself the goal of freeing up space without getting rid of the bike.

    Shelf hook method

    Hanging a bike from the ceiling is very simple using a familiar object. hook, or rather, hooks, since there will be two of them, and they must reliably support the weight of the bike.

    Determine the location of the structure

    First, find a ceiling beam that serves as a load-bearing support. How to do it? Climb the ladder up and just tap the ceiling. Where there is no beam, the sound will be dull. But if the sound changed to a sonorous one, which is obtained when hitting a solid object, then you have found a ceiling beam.

    If you can’t find a place to attach the ceiling hooks to hang your bike in this way, you can try hammering in nails. If it is impossible to drive in a nail, then you are in a beam. Yes, you will then have to carry out cosmetic repairs on the ceiling, especially if luck does not immediately favor you, but the place will be chosen correctly. Be sure to be as careful as possible when standing on stepladders or stairs.

    First hook

    Visualize how you hang the bike on the hooks. Make a note where you think one of the hooks on the ceiling joist should be. Now in this place you need to make a test hole to make sure that the intended hook is secured. If the hole does not crumble and will be able to withstand a heavy load, then nothing else needs to be done. But if the beam crumbles, then you will first have to install a reliable cement-filled dowel into it.

    The most convenient way to drill vertical holes in the ceiling is to use a cordless electric drill. Remember to wear safety goggles and a respirator to keep building dust out of your eyes and respiratory tract. Once the dowel is in place, you can screw in a sturdy hook capable of supporting the weight of the bike. Yes, do not be surprised, it is best to buy hooks with a capacity equal to the weight of the bike, not half of it. suddenly something goes wrong one day and the bike hangs on one hook.

    At what distance to mount the hooks?

    So, the bike will be suspended by the wheels. Therefore, in order to determine the distance at which it is necessary to mount the hooks from each other, you need to know the distance between the wheels. You can measure it with a tape measure, measuring from the center of one wheel to the center of the other wheel. It is best to carry out this manipulation several times so that the calculations are more accurate, otherwise the meaning of the construction with hooks is lost.

    Second hook

    Since the distance between the wheels, and therefore between the hooks, is absolutely accurately measured, you can proceed with the installation of the second hook. By the way, in most cases the distance from the center of the rear wheel to the center of the front wheel of an adult bicycle is 120 centimeters. But it’s still better to measure this distance on your bike, and several times, so as not to be mistaken. The hole for it is made in the same way as for the first. if necessary, first put the dowel, and only then screw the hanging hook into it.

    Hook result

    So, the hooks to hang the bike by the wheels are already screwed in, you can use them without fear, because they are built into a reliable ceiling beam, and each of the hooks is able to support the weight of the entire bike. It is most practical to choose hooks with vinyl coating, which will prevent scratches on the wheels of the bike, which can ruin its appearance.

    Method two, more complicated

    Such a system is practical if the ceilings are high enough in the house or garage where the bike will be stored, and therefore it is inconvenient to use the hooks.

    To begin with, you need to find the strongest place on the ceiling in the same way as for mounting hooks. it is a load-bearing ceiling beam. Then the first pulley must be installed in the ceiling beam. By the way, the pulley. it is a wheel with a groove for a rope or cable, which transfers the translational motion to this rope, which is exactly what is needed to lift the bike to the ceiling. The installation of the pulley will depend on its design features. And its installation should be described in detail in the instructions attached to the pulley itself.

    It is best to use a cordless drill or screwdriver to drill holes and tighten bolts or screws. When installing, remember that the pulley bracket must be parallel to the beam and that the system is in the safest spot on the ceiling.

    At what distance to attach the second pulley?

    The bike, which will be lifted to the ceiling and stored there, will cling to the steering wheel and seat. Therefore, to obtain the distance at which it will be necessary to secure the second pulley, you need to measure the distance from the support under the seat (rear) to the handlebars. Mark the location of the second pulley and tap the ceiling again in this place so that you know for sure that the fastening will be made on the ceiling beam, and not past.

    About the lifting mechanism

    The bike will be lifted up to the ceiling using a rope or cable through two pulleys. Therefore, having mounted the first pulley in the ceiling, pass a rope through it, which you will then use to raise and lower the bike. Use the holes on the wheel to secure the rope. According to experts, the eight knot is suitable for such a purpose as lifting a bicycle to the ceiling, very well.

    Second pulley

    So the location of the second pulley has already been marked, and the rope is securely attached to the first wheel of the structure, you can proceed to the installation of the second pulley. Both devices must be on the same straight line and parallel to the beam. This should be done for the reliability of the entire structure. The pulley is mounted to the ceiling according to the instructions supplied with it. After finishing the installation, pull on one and the second wheel of the structure as much as possible. it’s better to know now that the mount is secure than to find yourself under a bicycle that has collapsed on your head.

    Mounting the lifting device

    Two pulleys are fixed to the ceiling, so you can start installing the lifting system itself. ropes. It is fixed on the first pulley, so it must be passed through the second pulley, also using special holes for this. To lift the bike to the ceiling using pulleys and a rope, it is best to use special hooks that hook the bike to the handlebars and seat.

    It is more reliable and practical than wrapping the transport with the rope itself. One end of the rope must be fastened to a special hook mounted in the side wall. This manipulation will keep the system in balance. When installing the rope throughout the entire system, make sure that no knots form anywhere that will hinder the operation of the entire system on the ascent and descent.

    So, the system is completely ready for work. Try to handle it: put hooks and ropes on the bike. under the seat and under the handlebars, pull the rope, gently lifting the vehicle to the ceiling. Secure the rope by making sure the hook is secure in the wall. Use anti-slip pulleys to prevent the bike from falling sharply when going downhill.

    Best place: how to store your bike in the garage

    With the onset of winter, cyclists start looking for a place where their bike can ride out the cold. Very lucky for those who have their own garage premises. However, you need to understand what it is like to properly store your bike in the garage. To do this, you will need to carry out special preparatory measures and the presence of fasteners.

    How to store your bike properly in winter

    Most often, bicycles are stored on balconies, but there they are too exposed to the aggressive effects of sunlight and rain. Therefore, garages are often considered as an alternative to an apartment.

    READ  How to lubricate the steering column of a bicycle

    Storage preparation

    Before storing your bike in the garage for a long time, you need to prepare it. Compliance with the recommendations will preserve the appearance and working condition of the vehicle until spring:

    • Remove all dirt and old lubricant from the bike. Thoroughly clean the elements with a rag or brush and then treat with solvent. At the same time, remember that in the spring you will need to lubricate the chain and other rubbing parts back.
    • Apply fresh lubricant and change technical fluids, paying particular attention to chains, derailleurs and brake cables.
    • To protect metal parts from temperature fluctuations and moisture, use silicone.

    [attention type = red] Important! After preserving the bike, you need to prepare it for storage. [/ Attention]

    For conservation, certain actions are performed with the elements:

    • The chain must be set to minimum sprockets everywhere.
    • Loosen all cables and brake springs.
    • It is recommended to lower the tire pressure by half, despite the fact that during the season you carefully monitor this parameter and inflate them so that the tires have the correct pressure.
    • Remove computers from the unit.
    • Loosen the head and seat straps.

    Such measures will protect the bike from breaking the cables and cracks in the rubber, which may appear from the cold.

    To save more space, do a few tinkering with your bike before attaching it to the holder:

    • remove the pedals and place them next to the cranks;
    • turn the steering wheel so that its handles and frame are at a 90 degree angle;
    • dismantle the seat if it is not needed for hook;
    • if the bike is stored on the ceiling, the wheels can be removed.

    Location of the bike in the garage

    In general, the ways of storing a bicycle in a garage are not much different from an apartment one. Don’t worry if this is your first experience, as keeping your bike in the garage is just as easy and convenient. Let’s take a look at the main options:

    • Ceiling mount. Two blocks of holders are fixed on the ceiling, between which a rope with hooks for the handlebar and saddle is pulled. It is enough to pull on the free ends, as the bike rises up. This method is suitable for any type of bike, difficulties arise only with the initial installation.
    • Wall mounts. The design consists of clamps installed on the wall at different heights. They usually have rubberized ends to protect the bike parts from damage. The vehicle is fixed to the frame, so it can be difficult with the ladies and foldable models. Of the advantages, it is worth noting a more rigid fixation, the ability to place several units at once and their constant visibility.
    • Fixation for the wheel. In this case, different devices are used, which are united by the fact that the bike does not hold to the frame, but to the rotating element. Thanks to this fixing, a lot of space can be saved, because the units are installed in an upright position. However, this is not recommended for models with hydraulic brakes. Also, the load on one of the rims increases, it leads to a distortion of the frame.

    The garage is an ideal place for wintering a bicycle, there transport does not bother anyone, and proper preparation will protect it from possible changes in temperature and humidity. If you have perfect cleanliness in this room, then you can put the bike in a case so that it does not get dirty. Garage bike racks are identical to apartment options, so cyclists can choose the one that suits them best.

    Storing your bike in the garage

    A garage is a place where not only a vehicle is stored, but also many other items that have nowhere else to be located. This includes old furniture and tools with spare parts. But a large number of things, besides the car, does not mean at all that everything is in disarray. With the correct organization of the space, even in such a small room as a garage, a lot of items can be kept in perfect order.

    The topic of our today’s article is directly related to the storage of “foreign” items in the garage, namely the bicycle. Like a motorcycle, few people use a bicycle in the winter on icy roads. This means that it is necessary to provide for proper care and storage for it during the cold weather. This is what we will talk about, below you will find answers to the following questions:

    • How to hang a bike in the garage?
    • Basic principles of bike storage.
    • Bicycle storage for the winter.

    Hanging the bike in the garage

    Due to the lack of space, the bike in the garage is often stored in a suspended state. This, on the one hand, saves space, and on the other hand, it is great for the bike itself. Therefore, below we will tell you how to hang a bike in the garage and what you may need for this.

    Bicycle attachment methods

    There are three main ways to secure your bike. Which one to choose depends only on the amount of free space and your comfort.

    The frame is parallel to the wall.

    With this mount, the bike takes up quite a lot of space on the wall, but very little relative to the space of the room. It is most convenient to hang the bike with the wheels down, so as not to turn it over every time you need it.

    Frame perpendicular to the wall.

    In such cases, the bicycle takes up very little space relative to the wall, but the space of the room “eats up”. Most often, this arrangement is chosen if there is a small corner in the garage behind the closet or between the shelves, where the bike will not interfere. With this method of fastening, the wheels are located on the wall.

    Under the ceiling

    Ceiling mount is ideal for rooms with high ceilings. In other cases, it is impractical and inconvenient, as it will interfere with free movement.

    Mount types

    We found that there are three ways to secure the bike. But how to fix it? There are a lot of types of bike mounts. We will tell you about the most convenient and successful devices on which you can hang your bike.

    Special mounts. Hooks

    Using hooks to hang your bike is the easiest and most economical way to attach. They are suitable for all mounting methods.

    Racks

    As a rule, the racks are installed with support on the floor, which takes up additional space. On one rack, you can place two bicycles parallel to the wall or one perpendicular. Please note that the number of bikes you can place depends on the size of the rack and the bike itself.

    Shelves

    Using shelves to place your bike on the wall is more of a design solution than a practical solution, as specialized brackets or hooks will hold the bike somewhat better. This mounting option is suitable for storing bike transport in an apartment or in a very neat garage.

    Bike storage: what you need to know about?

    Many bike owners do not always pay enough attention to how their bike is stored and in what conditions. But this approach is absolutely not correct. Bike storage, like any other transport, must be approached responsibly. Therefore, we will try to tell as much as possible about the conditions in which it is better to store bicycle transport and the principles of its maintenance.

    Temperature regime

    It is not recommended to store your bike in low temperatures (below 0 ° C). You should also avoid sudden and significant temperature changes. Due to the drops, condensation forms, which spoils the metal, therefore, the general condition of transport. Therefore, you should not leave the bike on the street or on the balcony for the winter. But in a garage for these purposes it is perfect, because even in an unheated garage, the temperature rarely drops below 0 ° C.

    Storage preparation

    Before leaving the bike to stand until spring, it is necessary to carry out a number of measures, thanks to which, even in conditions far from ideal, the transport systems will not lose their properties and in the spring it will be as good as before wintering. details about these measures below.

    How to store

    It is also important how the bike will be stored. It will stand on wheels or will be suspended. Disassembled or integral. It is worth paying attention to the manufacturer’s recommendations regarding the downtime of your model’s bike. After all, bicycles differ in materials and nuances of structure and work.

    Preparing the bike for wintering

    It is not so difficult to properly prepare your bike for long periods of downtime. It will take a little time, but the bike will be protected and prepared, which means there will be no problems with it in the spring. Therefore, we present instructions for preserving a bike for the winter.

    Washing

    First of all, the bike needs to be thoroughly washed after the season. Please note that dust and dirt must be cleaned very carefully. All hard-to-reach places should also be washed. You should also remove residual oil from the chain, sprockets, bushings, etc. For this, you can use a solvent or a special solution for cleaning.

    Grease

    After removing the old oil, you need to treat all the necessary parts with bicycle lubricant. Be sure to lubricate: chain, brake cables, brake levers.

    Protection

    In order to protect the metal from temperature changes, the bike frame is best treated with a special silicone grease. It will help keep the bike from moisture.

    After the measures for the conservation of the bike, you need to prepare it for a long downtime. Just a few simple activities will be enough:

    • put the chain on the smallest sprockets;
    • loosen the brake cables;
    • make sure that there is no excessive tension of the springs;
    • weaken the pressure in the wheels several times (optimally up to 1-1.5 atmospheres);
    • remove all electronic systems.

    Thanks to these simple conservation and storage procedures, your bike will be able to survive the whole winter even at 1 ° C without compromising its functionality and reliability.

    Bicycle storage is a responsible task. Your light friend needs to provide the most favorable storage conditions and secure placement. It will be quite unpleasant if the bike, which is poorly fixed to the ceiling, falls on someone’s head, while bending the frame. That is why we recommend that you check the reliability of the mountings several times and only then leave your bike with peace of mind until spring.