How to choose pedals for a mountain bike

Axle length

There are several manufacturing companies that offer pedals with different axle lengths to ensure the perfect fit. Also, this part may differ in width at the point of connection with the connecting rod. Standard axle length:

Contact models

  • Improved efficiency as energy is transferred throughout the entire pedal travel.
  • Improved handling. Contact models keep your feet on bumpy descents and make things like jumping much easier.
  • Reduced size. The design reduces the footprint of the platform. Taking care of such components is much easier.

Most often, such models are bought by professional athletes, since they have a specific purpose and are much more expensive than platform ones.

Flat Pedals. Our Top Picks. Aluminum & Composite: MTB Pedals Buyer’s Guide

Which pedals to choose for a bike

At first glance, pedals on a bicycle are not very important. the components are small and seemingly insignificant. But the truth is that this is one of the main parts of the bike, because without it, the quality and ride comfort are greatly reduced. How to choose the right bike pedal? What should be considered, what parameters should I pay attention to? Let’s figure out these issues.

It costs about 1,500 rubles. The platform is made of composite material. Designed for intensive use. One-piece construction, cast. Equipped with special anti-slip spikes. Benefits:

Such models for a bicycle are quite heavy. you need to consider when choosing.

What else to look for when choosing

Regardless of the type of pedal you prefer, the following factors should be considered when choosing:

  • Weight. lighter is usually better, but sometimes it leads to reduced durability. Choose models that are as lightweight as possible, paying attention to the material: the lightest models are made of plastic, which is prone to deformation.
  • Care. look for models whose platform has open spaces where dirt can be easily removed.
  • Adjustability. this is especially important if you are choosing hybrid or contact models. When using them, you need to take into account the amount of force that is required to fix and release the leg.
  • Durability. Experts advise choosing a solid construction with smooth bearings that do not require additional maintenance. Quality models will withstand numerous bumps and scratches over the years. Ease of maintenance is also an important parameter. Some components can be easily repaired, parts replaced. Their operation is much easier.

Combined pedals

Combination mountain bike pedals combine the advantages of both versions: wide platform and clamping mechanism. There are two different styles. One type has a clamp on one side and a platform on the other, and the other has a clamp built into the platform on both sides.

The main disadvantage of hybrids is the weight of the bicycle pedals. due to the complex design, the weight is significantly increased. This is an important criterion when it comes to choosing cyclocross accessories. The problem with many combo components that only have a clamp on one side is the way they rotate. the side of the clamp is always towards the ground because it weighs more. But it is a good choice if the bike is used not only for riding on straight tracks, but also for extreme sports.

Types of bicycle pedals

There are three main types of bicycle pedals: platform, clipless and hybrid. The first. the most common, represent a solid base on which the leg is placed. The latter are attached to the spikes at the bottom of the cyclist’s shoe. They provide a blocking feel and are often the choice of professional athletes. The treadlers are flat and use neatly spaced traction pins to hold the shoe in place instead of a locking mechanism. Hybrid or combined are a platform equipped with a contact mechanism for fixing special shoes. By purpose, bicycle pedals are divided into several categories:

  • Walking ones. most often made of high-strength plastic;
  • General purpose. platform, made from a combination of metal and plastic;
  • Road. contact. They have a special mechanism for rigid fixation of the legs;
  • Cross-country. characterized by a lightweight design, do not have a platform;
  • Extreme Sports Mods. Equipped With Spiked Platform.

The choice of pedals for a bicycle must be made not only on the basis of their purpose or cost, but also taking into account a number of additional factors. You can view bicycle pedals here: https://www.velopiter.ru/cat/veloparts/0/24/1.htm

Vehicles will pass the intersection in the following order

choose, pedals, mountain, bike

  • Cyclist, yellow car, bus, blue car
  • Cyclist, bus, blue car, yellow car
  • Bus, Cyclist, blue car, yellow car

16.13. Before turning left and making a U-turn, the driver of a non-rail vehicle is obliged to give way to a tram in the same direction, as well as to vehicles moving on an equivalent road in the opposite direction, straight or to the right.

16.13. Before turning left and making a U-turn, the driver of a non-rail vehicle is obliged to give way to a tram in the same direction, as well as to vehicles moving on an equivalent road in the opposite direction, straight or to the right.

Mountain bike trappers, MTV

This is an improved version of the flat model, which is characterized by high quality, improved contact with the sole and durability. In addition, treadmills:

  • made of materials resistant to impact, stress and wear;
  • have the correct geometry and a comfortable width for setting feet;
  • withstand high loads;
  • have a ribbed frame or spikes around the perimeter. to enhance contact with the sole;
  • equipped with reliable bearings;
  • are characterized by an optimal ratio of weight and strength.

The driver of which vehicle will pass the intersection second?

  • Cyclist
  • Car
READ  How to change a wheel on a speed bike

16.14. If the main road at an intersection changes direction, the drivers of vehicles moving along it must follow the rules for driving through intersections of equivalent roads.

This rule should be followed by each other and drivers driving on secondary roads.

16.14. If the main road at an intersection changes direction, the drivers of vehicles moving along it must follow the rules for driving through intersections of equivalent roads.

This rule should be followed by each other and drivers driving on secondary roads.

How to choose bicycle pedals?

A bicycle pedal is an important part that transfers leg forces to the crank (the part of the bike that drives movement).

The main parts of the pedal are the axle (it is screwed into the connecting rod) and the body (the leg rests on it, it rotates on the axle). Good pedals have a chrome-molybdenum or titanium axle. The body can be aluminum, titanium, carbon or plastic. Contact pedals have a more complex design. a special platform is attached to the body using a contact mechanism, which serves as additional support for the leg.

In general, pedals should be chosen based on your personal preferences and depending on the riding style: try them out in practice and evaluate how comfortable it is to twist and take your foot off the pedals. Don’t buy athletic shoes until you’ve decided which pedals you want to fit on your bike. Pedal shoes will be easier to pick up after.

Most standard bicycles have narrow plastic pedals. If, even when choosing a purchase, you feel that it is inconvenient to twist them, it is better to change them immediately. Replacing the pedals will cost from 500 to 1000 rubles.

Which pedals to choose for a bike?

In order to choose the right pedals for your bike, it is important to understand what types are currently on the market and with which models they work best.

  • Platforms are a fairly common model. It is installed on both walking and sports bicycles for freeriding, however, it is never used in racing. The surface of these pedals is wide, the foot is held in place by special spikes. Can be easily used with regular non-sport footwear.
  • Walking pedals are the most common type of pedals and are installed on all entry-level bicycles. Their body is usually plastic, sometimes aluminum. They do not hold the foot very securely, but it is easier to get out of such pedals.
  • Contact. securely fixed on the leg, which allows you to pedal more efficiently. It takes some time to get used to them. to learn how to remove your leg after stopping. It is better to ride with such pedals in special cycling shoes.

There are two main mounting systems for clipless pedals. SPD and Look.

SPD (Shimano Pedaling Dynamic) is one of the world’s leading standards originally developed by Shimano. This contact is quite simple to set up and has affordable and cheap parts. Can be used on clip-on pedals for mountain bikes, road bikes and hybrids.

Look– used exclusively for road bikes. The leg is fixed very rigidly. It is easy to insert a foot into such pedals in cycling shoes, but it is rather difficult to unfasten, therefore professional cyclists use this contact for pedals. Advantage for cyclists. wider pedal surface for even load distribution.

Which cyclist violates the Rules when transporting passengers?

  • First
  • Second
  • Both violate
  • Both do not violate

Nukeproof Horizon Pro

  • Price: 75
  • Positive properties: an abundance of fixing pins; wide platforms provide reliable support, small structures provide decent ground clearance.

Horizon Pro pedals have 10 pins on each side, a slightly concave platform with a scale of 100 mm and a depth of 12 mm; reasonable weight. 444 g.

10 pins combine with the shape of a human foot to create a strong bond between the pedal and the shoe. Add a decent price to that and Nukeproof is our top winner.

What distance should be between groups of cyclists moving in a column?

  • 20. 40m
  • 40. 60m.
  • 60. 80m.
  • 80. 100m.
  • 100. 120m.

Best Mountain Bike Pedals

Pedals perform a rather complex function. For beginners, this is one of the three contact points where the body and bike come into contact. Therefore, the same attention is paid to a decent appearance as to the control element. But the main function of the pedals is to transfer energy to the entire bike to start moving.

Pedals. An important part of any bike, they come in a wide variety of shapes, sizes and styles. And since mountain bike pedal choices are often troubling and overwhelming, the most important thing is deciding whether to use flat or clipless pedals.

Flat pedals are essentially. just a platform for each leg. They are reversible, so it doesn’t matter which side you put your foot on, usually some extra grip is provided by pins dotted around them. The larger the surface of the pedal, the larger the area you have to place your foot on and the more contact between you and the bike.

The contact pedals are mounted on special rails installed on the soles of the shoes. They are also reversible (as opposed to track pedals) and tend to be less flat.

If you can’t decide on the choice of pedals, our article will help you with this. Here are the 7 best mountain bike pedals.

Crank Brothers Mallet E

And although outwardly they resemble a smaller version of Mallet DH pedals, the CrankBrothers Mallet E still have a similar bearing width to the aforementioned relative. Ensures accurate driving in of the pins and the use of any shoe to ensure sufficient clearance in the crank system.

The pedals have 6 adjustable pins on each side, which are integrated in a fairly comfortable way and the girth provides decent support for a flexible shoe.

One of the important is the Clutch Pad function. Small, plastic inserts fit on either side of the spring mechanism to adapt the contact between the pedal and the sole. Despite the fact that they are difficult to remove after use due to the tight fit (you can use a nipple), switching between pads of different fineness (they are included in the kit) really gives a meaningful feeling when inserting and removing them.

Nukeproof Horizon Pro

The Horizon Pro pedals have 10 pins on each side, a slightly concave platform with a scale. 100 mm and 12 mm deep; reasonable weight. 444 g.

10 pins combine with the shape of a human foot to create a strong bond between the pedal and the shoe. Add a decent price to that and Nukeproof is our top winner.

READ  How to choose bike grips

HT ME05

If you are looking for a lightweight model and are supportive of flat platforms, then once you reach the ME05 XT with a minimum weight of 292 g, look no further.

Despite the weightlessness, the platforms will confidently support even the largest feet, while 10 pins on each side will keep your feet tight in any extreme situations. The grip is impressive: the foot is held firmly, but does not freeze like a claw, so you can adjust the position.

Deeply concave platforms hold your feet securely for added traction and confidence even when the trail gets bumpy. And although made from lightweight magnesium, the pedal body is tough enough to handle the daily hassle and bumps.

CrankBrothers 5050 3

Knowing Crank Brothers, it’s safe to say that the 5050 3 pedals will be of the highest quality, so the price matches the quality. The platform is large and has a comfortable, concave shape for excellent grip when combined with 10 pin-type set screws on each side.

The pedal body sits far enough from the crank so you can actually take up most of the 96x95mm platform, even with bulky boots.

The pedals run well in mud and allow it to fall through, this method eliminates the need to use a sliding surface against dirt. Crank Brothers’ 5-Year Warranty Also Gives STIHL And Confidence.

Shimano XT M8020 Trail

Designed for paths, hills, uneven terrain. The M8020 is 3.3mm wider than its predecessor, resulting in an 11.7% increase in contact area.

Pedals weigh 408g, and traditional Shimano steel cleats and attach / decouple clamping mechanism maintains regular consistency (spring tension can be easily adjusted using a 3mm hex wrench).

The contact surface of the pedal to the shoe is thin, but the extra width does help prevent the foot from twisting when the bike is tilted.

Superstar Nano-x

The Nano’s pedals are designed in the UK from 6082 aluminum. The massive 101x110mm platforms provide plenty of room for even bulky shoes. The whole set weighs 435g.

On a bike, the wide, concave body provides a stable platform and aims to get your feet back into place automatically after a turn. You will never lose ground, even on uneven road sections. The price is quite reasonable.

Best Mountain Bike Pedals

Pedals perform a rather complex function. For beginners, this is one of the three contact points where the body and bike come into contact. Therefore, the same attention is paid to a decent appearance as to the control element. But the main function of the pedals is to transfer energy to the entire bike to start moving.

Pedals are an important part of any bike and come in a wide variety of shapes, sizes and styles. And since mountain bike pedal choices are often troubling and overwhelming, the most important thing is deciding whether to use flat or clipless pedals.

Flat pedals are essentially just a platform for each foot. They are reversible, so it doesn’t matter which side you put your foot on, usually some extra grip is provided by pins dotted around them. The larger the surface of the pedal, the larger the area you have to place your foot on and the more contact between you and the bike.

The contact pedals are mounted on special rails installed on the soles of the shoes. They are also reversible (as opposed to track pedals) and tend to be less flat.

If you can’t decide on the choice of pedals, our article will help you with this. Here are the 7 best mountain bike pedals.

Nukeproof Horizon Pro

  • Price: 75
  • Positive properties: an abundance of fixing pins; wide platforms provide reliable support, small structures provide decent ground clearance.

Horizon Pro pedals have 10 pins on each side, a slightly concave platform with a scale of 100 mm and a depth of 12 mm; reasonable weight. 444 g.

10 pins combine with the shape of a human foot to create a strong bond between the pedal and the shoe. Add a decent price to that and Nukeproof is our top winner.

How to choose contact pedals and shoes for them?

Clip-on pedals are a very peculiar thing to grow up to. Another question is what kind of shoes to choose for this type of pedals. Both the first and second questions require a little bit of knowledge. It is about them that are described in the article. The pedals consist of 2 parts: a pedal and a cleat, which is bolted to the sole of the shoe. Cleats are usually found with pedals. If lost or damaged, you can easily find a replacement for spikes at any time, but it will cost a pretty penny.

Types of clip-on pedals There are road and MTB standards for cleat-to-pedal attachment. It depends on what kind of shoes you need to purchase later. It is also worth remembering that none of the contact pedals are equipped with protection against dirt or snow (in case of skiing in winter). And if the thorns are clogged, you need to clean them.

Shimano SPD The most famous type of pedal for mountain bikes. Despite the high availability, the quality remains high, sometimes even after tens of thousands of kilometers. Depending on the operating conditions, they are likely to last from 2 years or more.

The appearance of signs of wear on the pedals in the form of axle play requires a special key. Such sores are cured in more expensive models. You can disassemble them with ordinary tools. Fans of constructors in childhood will have to sweat a lot. over, the ratio of price and estimated mileage is more than acceptable.

Some complain about the lack of horizontal legroom. In the case of a non-standard setting of the foot, the cyclist will have to think of something, due to the inconvenience that has arisen. As practice shows, people find different ways to resolve the issue.

Shimano SPD-SL This standard is used for road pedals. The design of the road pedals is such that the foot is fixed as rigidly as possible. Unlike the SPD standard, there is no backlash on the SPD-SL.

It must be borne in mind that the spikes on road shoes almost prevent walking freely due to the fact that they protrude strongly from under the feet. A set of road pedals and shoes is recommended for those who plan to spend a significant amount of time in the saddle, winding kilometer after kilometer on asphalt.

Crank Brothers First of all, their simplistic design is attractive when compared to the above-mentioned Shimano. The Crank Brothers Egg Beater zips in very nicely. Here’s a comparison: Shimano pedals snap in as if something was dropped from a high-rise building, and Crank Brothers. almost without a sound. The cyclist will be pleased with the great freedom of the leg in the horizontal plane. The pedals work great in muddy conditions: one way or another, the owner will snap on.

READ  Why Bike Wide Wheels

Time Atac Consider also the Time Atac model. The sensations when riding them are more than pleasant. Simple zip-in, complemented by a secure fit of the leg. Lack of quickly grinding cleats on the pedals and, albeit not strong, but backlash.

The forums loudly argue that Time’s budget models are not worth the attention. But more expensive models live for themselves quite a long time, know yourself change spikes and basta.

Which pedals to choose? In general, the most optimal and practically does not require expenditure of time, effort and money. Shimano. Especially for ordinary amateurs. If you take a specific model as an example, then the Shimano M520. And you don’t have to worry about contacts within 5000-7000 km.

For frequent driving in forests or swamps, as well as in places with clay soil, it is better to choose any Crank Brothers or Look Quartz model. For those who often change contacts to treadlers and vice versa, Shimano 324 is suitable. On one side they have a simple surface, and on the other side they have a contact cleat.

Which cycling shoes to choose? Shoes are easier. Here you have to choose between hiking or sports shoes. Do you often have to walk? It is better to choose specially designed contact shoes. In the case of Shimano, these are shoes with the letters MT. In the case of a lot of time on the bike, sports models are much better. Rigid sole, adjustable closure and overall better foot hold. You can walk in such boots, but it will be extremely uncomfortable.

It is often mentioned that Shimano has small shoes and should be taken one size larger. If it is additionally indicated that the last of the shoes is wide, then you can get boots that can fit a foot in a warm sock, and therefore skiing in winter will be more comfortable. Bicycle shoe size is a very important indicator. The leg in it should be well fixed, but nothing should press. Otherwise, pain will be felt at long distances.

Road Or MTB Pedals. Which Should You Choose?

Clipless pedals are most commonly used in XC racing. For more information on how to prepare for a race like this, see our article: How to Prepare for a Multi-Day Cross Country Race

What to look for when choosing a platform pedal

Platforms (treadmills) are divided primarily by the coefficient of adhesion to the shoe sole. A large number of sharp cleats increase traction, but they can also cause injury if the foot slips off the pedal. An alternative would be a wider platform with thicker edges and a taper in the center for extra traction.

The next feature when choosing pedals is the thickness of the platform itself. In our case, the thinner the platform is, the better, thicker pedals may seem stronger, but due to their weight they can cause discomfort. Thin pedals are smaller and lighter than wide ones, but this material saving is achieved by using small bearings in them, which greatly affects the resource. Therefore, it is advisable to select models in which there are several sufficiently large bearings or to purchase pedals that can be lubricated and repaired on their own.

If you usually ride on rocky terrain, then it is also worth considering how often you will pedal against stones while riding, which can easily damage the spikes and hooks on the platform. To avoid such damage, pedals should be selected with removable cleats. In addition, some of the manufacturers provide removable platforms for their pedals.

Pedal Choice: Pins or Platforms

The concept of more modern platform pedals is almost the same as the pedals that were used on our children’s bicycles. Wide, spiked pedal support surface improves grip on the sole of the shoe.

As a rule, platforms are used by amateurs and professionals of extreme cycling disciplines who ride mountain bikes. Due to the wide platform, the leg is well protected from various roots, stones and curbs. A sense of freedom is also maintained: you can always take your foot off the pedal to maintain balance. Thanks to special spikes and teeth on the platform, the foot does not fly off the pedal on bumps or turns. Regular shoes tend to grip well with this type of pedal, but we still recommend that you use highly specialized shoes (cycling or skating) that have a soft rubber outsole for better traction.

When it comes to clip-on pedals, specialized cycling shoes are indispensable. Such shoes are equipped with a special spike (when cycling was just in its infancy, shoes on the pedals were fixed with special straps), which is screwed to the sole. The contact pedal is equipped with a special lock in which the shoe spike snaps into place, which provides reliable traction and maximum transfer of physical strength to the rider during pedaling. At the heart of the lock is a spring that works like a latch, so you can always release your leg with a horizontal movement of the foot.

Specialized boomslang

  • Price: 110
  • Positive properties: among the flat grip pedals, the most affordable, durable design, which allows the pedals to rotate smoothly; expensive, but worth the money.

With a platform width of 100mm, Boomslang offers a decent size of foot insertion surface, although the bearing housing that is embedded next to the connecting rod cuts has little space available.

It is also worth noting that the washer pedal must be used with specific cranks in order to provide the Boomslangs with the necessary clearance to rotate freely.

Pedals weigh 437g, and concave platforms and 11 pins on each side deliver stunning traction.

What are you paying for? Well, in short, for durability and spare parts. After months of mishandling the bearings / needle bearings, they will still spin just as smoothly without any nicks in any of the pedals, plus there are 4 spare pins for each platform in case you do manage to rip them off.