How To Change The Tire And Camera On A Bicycle

Installing new tires

1. We put on new tires on one “edge” of the wheel, so that we have a free for inserting the camera.

2. We take a new chamber (deflated) and, starting with the nipple, lay it along the rim.

3. While the camera is NOT closed yet, pump it up a little to make sure it is laid flat and not distorted anywhere. If the camera is kinked or twisted during the installation process, it will most likely burst as soon as you get on the bike. Agree, you don’t need such unnecessary frustrations, because these are NOT only Spoiled plans, but also additional financial costs.

4. Now you need to “tuck” the tires into the rim. In the first steps, this is done manually, but at the end, editing will be required again. You can do it with one, but it’s better to use two. Use it to pull the tires slightly towards you so that it fits easily into the rim. You can push the tires a little inward with the assembly so that it is better fixed. The main thing is that the mounting depth is the same throughout the entire circle.

5. After the wheel is closed, pump the chamber to the desired state. Usually, the correct pressure is indicated on the tires, check it to properly adjust your pump.

6. Now screw the cap onto the nipple to fix the condition of the wheel.

7. It remains to install the wheel in place and that’s it. Now your bike is back on the move! Do a small circle on it at low speed to make sure everything is secured correctly and you feel comfortable. If necessary, pump up the chamber of the second wheel so that they are equally elastic. Many cyclists experience minor riding discomfort after replacing one camera. If everything is ok, you can go on the road. Suddenly what happens, you already know how to change the tire and you can do it even in field conditions.

We take out the punched camera

To remove the damaged camera from the wheel, it is necessary to remove it from the bike. this is much more convenient to work. Then follow the step by step instructions:

1.Unscrew the protective cap from the nipple. If necessary, completely deflate the wheel. This will make the job easier, since there will be no unnecessary resistance.

2. Using a razor, hook the edge of the tire and pull it out of the rim. Special tools allow this procedure to be carried out quickly and as painlessly as possible. If the editors are commenting, you can try using any thin and durable object, such as a spoon. Its handle has repeatedly helped out cyclists who did not have repair tools at hand. Make sure that She does not bend.

Important: The tool should NOT have sharp ends, so a screwdriver is not the best solution, although it does fit the intended shape. You can only damage the wheel more with it. If you want to keep your tires, don’t do it.

3. Optimally use two assemblies. First, pick up the edge of one, then, when Fix the position, pick up the tires with the second assembly in 2-3 centimeters. This will result in a release of pressure, and the work will go easier. Continuing to support the first with the assembly with your hand, with the second, continue prying the tire in a circle until it is completely released from the rim.

4.Now that one edge of the tire is completely removed, release the nipple and take out the damaged tube.

We will consider the installation process with the installation of both a new camera and a tire. If you are keeping the old camera, skip the first step.

How to change the tube or tires on a bicycle: Step by step instructions

If you are a cyclist, you need to be able to handle a number of common problems that can happen on the road. A broken wheel is one of the main ones. Unfortunately, you can hit a nail, a piece of metal or a broken bottle almost anywhere, and sooner or later it happens to everyone. Happened already? Read our review, which we have prepared together with Onliner, on how to change or glue the camera, tires in a bicycle.

Important points

Try not to rush during the procedure and be attentive at every step. Any carelessness can then turn into problems on the road. In case you are keeping the old tire, do not forget to check its inner part for the absence of piercing and cutting elements. It often happens that a part of the object, which pierced the camera, breaks off and remains in the tires. This could damage the camera again. So, if you manage to find the “culprit” of the tragedy, Make sure that you extract it completely.

When working with a montage, be sure to hold it with your hand, even if it seems to you that it is holding itself. The resistance of the tire can easily push it out. At best, it will just fall and you have to start over. At worst, it will fly out with force and can hit you in the face. The sensations are unpleasant, it does not already mean that it can be traumatic.

Disassembling a bicycle tire

Disassembling a bicycle tire on a wheel and then removing the bicycle tube is probably the most important operation. If it is carried out illiterately or carelessly, damage to the bicycle tube, tires, and even the wheel rim may occur.

For this purpose, it is strongly discouraged to use sharp objects such as screwdrivers, blades of or kitchen knives, chisels, and the like as edging. The best option is to use specifically specialized plastic or metal bicycle mountings.

How to remove tires from a bike? To do this, it is necessary to disassemble it, during which it is necessary:

  • Fully deflates the cycle tube through the nipple / spool (if still partially inflated)
  • Start the first assembly between the inner edge of the rim bead and the outer edge of the tire bead (on either side of the wheel, anywhere on the rim)
  • Hook up the edge of the tire bead with the assembly. In this case, you must act carefully so that at the same time DO NOT pick up (do not press, but not puncture) the very cycle tubes located directly under the tire. This will take some experience and skill, and for beginners and inexperienced. luck.
  • Using the first assembly as a lever, “Turn out” the bead of the tire through the bead of the rim and outward;
  • Continuing to hold the first assembly in the reached position, In the same way, start the second assembly 10-15 cm from the first, and also “Turn out” with it, the adjacent section of the tire bead through the rim bead, while the tension of the tire bead should be significantly weakened;
  • If this did not happen (when trying to pull out one of the inserted assemblies, the extracted section of the tire bead tends to “refuel” back inside), then you will need to carry out the same operation using a third installation;
  • If the tension of the removed part of the tire bead still loosened, and it does NOT tend to spontaneously “refuel” inside the rim, one of the assemblies should be removed one by one, put it between the NOT removed part of the tire and the rim (at a distance of 10. 15 cm from the already removed part), and bring the next section of the bead out. Often, in soft bicycle tires, this can be done simply by hand, without the use of beads. The operation ends when one tire bead is completely removed from the wheel rim outward.
READ  How To Pump A Bicycle Tube With A Thin Nipple

How to remove the camera from the bike? To extract it you need:

  • Completely rolls up (by hand, pliers or wrench) the cap of the nipple / spool and the lock nut of its sleeve (if its presence is provided by the design)
  • Run his fingers under the tires in the area where the nipple / spool is located, and remove the first section of the cycle tube together with the nipple / spool glass outward;
  • Gently pull the entire removable bike tubes out from under the tire.

How To Change The Tire And Camera On A Bicycle

Preparing to replace the camera on your bike

Preparation for replacing a bicycle camera should be divided into: a) in advance, and B) immediate.

A) As part of advance preparation, you should prepare the necessary spare parts, materials, tools and accessories (spare parts), which you should always have “with me” (for those who travel by bike away from home), or at least Nearby within reach (usually in a house or apartment, garage, shed, etc.). This list of necessary items should include:

B) In the course of direct preparation for replacing the camera on a bicycle, you must:

  • Choose a level and clean area without sand and dirt (in the field it can be grassy, ​​rocky, paved side of the road). If repaired in sand and mud, it is almost guaranteed that they will be brought into the subspaces of the bicycle tire, where they will become a prerequisite for its accelerated wiping and failure.
  • Turn the bike upside down and place it on the platform in a stable position, with support on the handlebar and saddle;
  • Get and prepare for work all the necessary spare parts, tools, accessories.

Removing a wheel from a bicycle

In order to replace one or both cameras, it is imperative to remove the wheel (s) from the bike. In this case, the procedure for removing the front and rear bicycle wheels has its own characteristics.

To remove the front wheel:

  • Bleeds air from the chamber (if it is still pumped)
  • Neutralize front brake: if rim brake completely “unfasten”, if disc. insert spacer-spacers between the brake pads of the caliper to prevent their complete closure;
  • Using a wrench, loosen the clamping nuts on the wheel axle one by one (if the wheel is eccentric. just open the eccentric)
  • Remove the wheel from the front fork dropouts (at the same time, the disc brake rotor. from the brake caliper pads, do not allow them to be completely compressed).

To remove the rear wheel:

  • Bleeds air from the chamber (if it is still pumped)
  • Neutralize the rear brake: rim and disc. in the same way as on the front wheel, if the brakes are drum (single speed or planetary rear hub), then it is necessary to disconnect the bolt fastening of the brake lever to the right lower stays of the bicycle frame;
  • Completely reset the bike chain from the rear driven sprocket or multi-star cassette (ratchets)
  • With a wrench, loosen the clamping nuts on the wheel axle one by one (if the wheel is eccentric, just open the eccentric)
  • Remove the wheel from the dropouts of the rear frame stays (at the same time, the disc brake rotor. from the brake caliper pads, do not allow them to completely close).

Fitting the wheel to the bike

To re-mount the wheel to the bike, you must:

  • Make sure that the clamping nuts on the wheel axle are loose enough (if the eccentric is unbuttoned)
  • On the sprockets (cassette, ratchet) of the rear wheel, before installing it in the dropouts, a bicycle chain was pounced;
  • Insert the wheel into the mounting brackets: the front wheel. into the dropouts on the front fork legs, the rear. into the dropouts of the rear bike frame stays. If the installed bike brakes are disc brakes, at the same time, make sure that the brake rotor disc fits neatly between the open brake pads. If the brake pads are still compressed, first carry out the operation to open them.
  • Tighten the clamping nuts on the wheel axle alternately (if the eccentric is to fasten)
  • Bring the brakes to working position: rim. “Zip up”, disc. adjust, drum. screw the brake lever to the right lower frame stays;
  • Turn the bike over and put it on wheels;
  • Take the pump, pump the wheels (chambers) with air to the standard pressure;
  • Check bike on the go.
READ  How To Chain A Sports Bike

When to change cameras?

The list of situations in which you will need to replace the camera on a bicycle should include:

  • A puncture or rupture of a bicycle tube, which can occur for many reasons and almost anywhere: on an off-road, country road, in a city, even on a flat highway with a smooth hard surface;
  • The need to replace any components of a bicycle wheel: an old bicycle tube (repaired many times, outdated, with a damaged nipple / valve), bicycle tires, wheel rims, wheel spokes;
  • Complete disassembly of the bike for storing it for long-term or seasonal storage, and its subsequent assembly.

Installing a new tube with reverse bead tires

Immediately after removing the old bicycle camera, you can already install a new (spare) one. If you have a spare camera, you will have to wait until the old one is repaired.

How to replace a camera on a bike? To install a new (spare) camera in the wheel, you must:

  • It is imperative to carry out an external inspection and palpate the inner surface of the bicycle tire and wheel rim with your fingers. The objects of search are: nails stuck in rubber tires, wire fragments, glass, ends of a torn wire cord and other sharp objects that have crawled inside, as well as sharp chips and cracks on the rim protruding from the rim of the wheel spoke head. If such objects are found, they must be removed, the wheel spokes must be tightened or replaced, along the rim with chips and tires with a torn cord, make a decision to replace them.
  • Insert the first section of the chamber with the nipple / spool cup under the tires with your fingers, push the nipple / spool cup into the corresponding hole in the rim, secure it with a lock nut (if its presence is provided by the design)
  • Starting from the first section and to the sides, carefully tuck all the tubes under the tires with your hands.
  • Reverse the bead of the bike tire by refueling its previously removed bead back inside the rim. Why first fill it with your hands, and at the final section, when the tire bead tension increases greatly, use one or two assemblies. To do this, place the assembly under the free edge of the tire and hook it onto the edge of the rim flange. Next, using it as a lever, fill the remaining section of the bicycle tire bead inside the wheel rim.
  • To prevent or eliminate allowed twists, kinks of the bicycle tube, its pinching between the beads of the tire and the rim, it is recommended to wash the newly assembled tires with a filled tube thoroughly by hand in a circle.

How to change the camera on a bike

Sometimes you wonder how many cyclists who ride their BIKE almost every day, do not know how to change the camera on the bike, or they will not be able to do it on their own. Such technically illiterate cyclists, hearing the question “how to change the camera on a bike instead of removing the wheels” don’t even feel the trick in him!

In fact, the technique of such a replacement is not at all complicated, it is known as such that it does not require much. Here the question is more about the skill and skills that are acquired in the course of real practice. Nevertheless, the process of replacing a bicycle camera has a number of its pitfalls and nuances.

Required tire removal tool

There are two types of bicycle tires with a separate chamber inside and tubeless, the structure of which is similar to the car. First Most common.

When replacing tires on a bicycle, you will need two mounting spatulas and a pump.

Spatulas are needed to conveniently move the tire away from the rim. In this case, a flat screwdriver will NOT save the camera due to the possibility of snags, damage the rim or scratch the paint.

A pump will be needed to pump air into the tube when the new tire is installed on the bike rim.

Choosing the right bike tire

In order to change the VELOBIKE tires to better ones, it is important to understand the purpose of buying tires, the main ride surface and understand high-quality rubber. But these are not the main criteria when buying a new rubber for a bicycle. In addition, tires for bicycle bikes are divided according to the season of use and the type of tread on the bicycle tire.

For example, spikes will be present on winter tires for timely braking. Others are ideal for city driving or racing tracks, but not for off-road, due to the lack of protectors.

Bicycle tires are made of composite material or rubber. The first material is more durable, but has a higher price. The second, they wear off faster, but adhere better to the coating. Price fluctuates depending on the quality of the bicycle rubber. Artificial rubber used in the production of cheap tires has a short service life, which cannot be said about natural.

When deciding to change your bike tires, remember the following factors for poor starting material:

  • If you press and hold your finger diligently, traces of rubber will remain on the skin;
  • Thin protectors on such tires will easily come off and not stretch;
  • The walls must be smooth.

Putting new tires on the bike

Before installing a new tire, check the integrity of the protective tape on the rim. It is necessary to prevent the spokes from piercing the camera on the bicycle wheel.

An important point when you need to change tires is to align the tire in the direction of the wheel travel. For this, arrows are drawn on the walls indicating the direction. If you change the rear wheel, then the speed stars will be on the right side of the rim and the movement will be forward.

We fill one side of the bike tire inside the rim is large. Then we install the still deflated camera inside. It should not be completely deflated, but slightly maintain its shape. You need to start inserting from the side of the nipple, while making sure that the camera is not twisted. The threading of the second side of the bicycle tire into the rim is started from the nipple side to prevent the chamber from jamming between the rim and the bicycle tire. If difficulties arise at the end of work, fill the edge of the tire with a spade.

READ  How To Change The Rear Wheel On A Speed Bike

After that, holding the nipple on the side of the tire, put a pump on it and pump air into the chamber. This is done so that the nipple does NOT go inside the chamber.

Inflated the air halfway, check again if the bike tire is sitting well, and then continue.

Sequencing

So, what needs to be done to remove the tires from the bike?

  • We start to remove the wheel with Blurring the brakes (in the case of V-Brake) or removing the caliper (disc), they can greatly interfere with the next steps.
  • Loosen the bolt or cam holding the wheel to the frame.
  • We take out the wheel.
  • Excess air is released from the chamber through the nipple, it is important that there is as little air as possible, otherwise the chamber is easily touched and damaged.
  • Prying the edge with a flap or replacing it at one point.
  • Measuring 10-15 cm and repeat the operation, bending back the segment between the two beading, and taking it outside the rim outward.
  • Carefully continue removing the tires until one side is completely behind the rim.
  • We repeat the action in the same direction with the second side of the tire. Usually this stage is already easier.
  • Done!

Repair of the camera only is limited to items 1-7.

The reverse process is similar:

  • It is necessary to put on the tires, starting to lay it inside the rim with one side.
  • On the last 15-30 cm Fastening one side of the tire with a bead and carefully transfer the entire edge inside the rim.
  • By placing the edge of the tire inside the rim and installing the camera.
  • We repeat the process of bending through the rim with the second edge of the tire to finally put it on.
  • Done!
  • Mount the wheel, closing the brakes.

Do not forget that all actions should be carried out correctly. Rubber does not like heavy loads, especially the thin and soft rubber used in chambers. All operations with the camera inside the tire should be carried out delicately.

How to remove a punctured tube from a wheel

In order to pull the tires out of the rim, it is necessary to pick up its edge with the first “assembly” and bring it out of the rim. At the same time, you must hold the assembly so that the tire does NOT end up inside the rim again, and the assembly itself does NOT fly into your forehead.

After that, with the second assembly In the same way, pull out the edge of the tire next to the first assembly. Do not forget to hold the first editing!

If the tire tension is still too high after using two assemblies, then use the third.

In total, you should get one edge of the tire completely removed from the rim.

Next, you need to remove the camera itself. To do this, remove the nipple and then carefully remove the camera from under the tire.

Installing new tires

1. We put on new tires on one “edge” of the wheel, so that we have a free for inserting the camera.

2. We take a new chamber (deflated) and, starting with the nipple, lay it along the rim.

3. While the camera is NOT closed yet, pump it up a little to make sure it is laid flat and not distorted anywhere. If the camera is kinked or twisted during the installation process, it will most likely burst as soon as you get on the bike. Agree, you don’t need such unnecessary frustrations, because these are NOT only Spoiled plans, but also additional financial costs.

4. Now you need to “tuck” the tires into the rim. In the first steps, this is done manually, but at the end, editing will be required again. You can do it with one, but it’s better to use two. Use it to pull the tires slightly towards you so that it fits easily into the rim. You can push the tires a little inward with the assembly so that it is better fixed. The main thing is that the mounting depth is the same throughout the entire circle.

5. After the wheel is closed, pump the chamber to the desired state. Usually, the correct pressure is indicated on the tires, check it to properly adjust your pump.

6. Now screw the cap onto the nipple to fix the condition of the wheel.

7. It remains to install the wheel in place and that’s it. Now your bike is back on the move! Do a small circle on it at low speed to make sure everything is secured correctly and you feel comfortable. If necessary, pump up the chamber of the second wheel so that they are equally elastic. Many cyclists experience minor riding discomfort after replacing one camera. If everything is ok, you can go on the road. Suddenly what happens, you already know how to change the tire and you can do it even in field conditions.

How to change the tube or tires on a bicycle: Step by step instructions

If you are a cyclist, you need to be able to handle a number of common problems that can happen on the road. A broken wheel is one of the main ones. Unfortunately, you can hit a nail, a piece of metal or a broken bottle almost anywhere, and sooner or later it happens to everyone. Happened already? Read our review, which we have prepared together with Onliner, on how to change or glue the camera, tires in a bicycle.

Tools

Different tools will be needed depending on the bike design.

The minimum set is hands (preferably with gloves), nothing else is needed. What is used to facilitate the process?

  • Dismantling a bicycle wheel. small oblong plastic plates with a “hook” at the end. Very helpful to hold the edge when starting to dismantle without effort, and then remove it.
  • Any replacement of the bead. often used keys (from locks or wrenches), coins, sticks (which is quite traumatic, by the way).
  • Keys for dismantling the wheel. there are also models where it is bolted, and not an eccentric.
  • Pump. needed when installing the wheel back.

How to change a tire on a bicycle