How to change the code on the bike lock

Table of Contents

Adjustment and repair of the coded lock

Usually, after purchasing a lock, the buyer discovers a standard code set of numbers on it. It can be expressed in four identical numbers. All this is reflected in the instructions for the product.

In order not to think about how to break a bicycle combination lock, you need to immediately change the combination on it. Your best bet is to write in numbers that you can’t forget. For example, the birthday of a beloved dog. As a rule, thieves, starting the process of theft, choose exactly the factory combinations. And a person who is too lazy to devote time to changing the code loses his precious property.

change, code, bike, lock

Let’s look at the step-by-step steps for replacing the code.

  • Using the old version of the numbers, open the lock.
  • At the end of the lock, near the location of the code, you need to find the ring and change its direction towards the marked arrow. We perform the action until it stops.
  • We change the combination to a suitable one.
  • It is strictly placed opposite the mark.
  • The new code must be memorized or written down.
  • The ring returns to its original place.
  • We close the product and use the result.

The whole procedure will take a minimum of time. And the benefits of this action. on the price of your bike.

How it works

In its simplest form, a coded lock consists of several coded discs rotating on top of each other. Each disk platter is “responsible” for changing one digit. They, or rather the holes in them, work as closing elements. The cheapest models of such locks have 3 or 4 rotating cells with fields for entering numbers. The starting installation assumes a code with the icons “000” or “0000”. The owner, purchasing such a lock, independently sets a new numerical password, relying only on his own memory.

How to open the combination lock of a bicycle in case the code is forgotten

The information provided should be used directly to get out of an extreme situation. We emphasize that the offenses committed during its use will entail serious punitive measures.

The steps below are for people who have forgotten the code or if the lock breaks.

Bicycle combination lock how to open. Algorithm of actions.

  • We preset all numbers to one level. for example, four units.
  • Both ends of the product are pulled in different directions. The goal is to find a small distance when selecting suitable numbers that are located next to.
  • We repeat the tensioning process until the distance between all indicators appears.
  • Correct combination and problem solved.

Of course, such actions can be carried out if the lock is not closed on a bicycle. Otherwise, if you do not want to damage the lock, the bike must be evacuated home, where the above steps must be taken.

The simplest combination lock

The simplest and cheapest are considered anti-theft devices from the category of those that are attached to cases, bags, suitcases.

There are only three (sometimes four) windows on them, which means that you can go through all possible combinations of numbers from 0 to 1000 in less than 1 hour. In order to unlock such a lock, you must:

  • turn all the wheels so that they have the same numbers;
  • pull the ends of the device (with the correct combination of two adjacent icons, a small gap is formed between them);
  • alternately change the numbers and pull the ends until all the gaps appear.

After that, the device usually opens immediately.

Some models of such locks emit a light click when the digital icon is selected correctly. At the same time, you can feel the characteristic movement of the shifting teeth of the lock with your fingers.

If the device was found separately from the bike, you can unlock it by gently pulling the ends with the locking cables coiled around the back of the chair. In this case, you need to ensure that the cells are displaced correctly.

Sesame, open up!

If the memory fails and the code does not work, you will have to conjure up the lock for several hours, or even days. But don’t despair! You will definitely be able to open a bicycle combination lock by simply going through all the digital combinations. At the same time, you have an undoubted advantage over a bicycle thief: you have nowhere to rush, there is no one to be afraid of. you can solve the puzzle with a password indefinitely.

Let’s consider several of the most common variants of combination locks.

How reliable is a combination bike lock?

Inexpensive modifications of combination locks are quite popular not only among cyclists, but also in other areas. However, it is worth noting that they do not have a high degree of reliability, because information on how to open a bicycle lock is quite easy to get. It is enough for a bicycle thief to enter one number correctly and determine its correctness with a quiet click. Then you can act according to the situation with time.

Therefore, the selection of a combination lock should not be based on cheapness, but on its quality characteristics.

Consider the main pros and cons of various options for bicycle locks, which can be an alternative to a code.

  • Security devices designed to grip the wheel with the frame can be quite reliable. But if a thief really likes your bike, then he can take your entire bike and load it for theft, for example, in the trunk of a car. Of course, it makes sense to take this risk, it only makes sense if the price of a bike is very expensive.
  • Plate lock. The main advantage is the budget of the purchase. The plates are easily cut by various locksmith tools. For example, metal scissors.
  • Rope options. Very handy and compact. But the thief copes with it, as in the previous version.
  • The most reliable product is considered to be a chain lock, which is made of steel of a special type of hardening. It is impossible to saw through. The disadvantage is the decent weight of such a chain.
  • U-shaped locking device. Perfect for a cyclist by all criteria. Minus. small girth distance. It can only be fastened in a designated bicycle parking.

How to change the code on the bike lock

Using this lock as an example, we will change the code “156” to the code “158”.

Using a Phillips screwdriver, loosen the screws holding the button holder

Carefully remove the holder with buttons

Remove the pin that is located under the coded button and rotate 180 degrees around its own axis, insert into place. Thus, in our case, the encoded button became unencoded. (fig. 4-5).

The same operation must be done with the pin under the button to be coded (Fig. 6-8)

Install the holder with buttons in place. (fig. 9)

As a result of the above operations, the lock received the code 158

Attention! When resetting the code, it is strictly forbidden to transfer pins from one row to another. This will lead to loss of functionality of the lock.

How to change the code on the suitcase lock?

It is important for every traveler that the voyage is safe. Therefore, travel suitcases are now very popular, equipped with combination locks, which significantly reduce the risk of theft of personal belongings.

Having ordered such a suitcase on the Internet with delivery, you may encounter common problems. you cannot open the combination lock on the suitcase, or have no idea how to change the code set at the manufacturer’s factory.

How to set up a combination lock initially?

If you’ve purchased a new suitcase, it’s easy to find out the code. Usually this is a three-digit combination “000”, occasionally “111”. That is, if you put all the numbers to zero (or to one), then you will open the suitcase without any problems.

If you bought a used suitcase (or took it from friends for a trip), then try to immediately find out the number of the combination lock. otherwise, you may have difficulty opening your suitcase when asked to do so, for example, during a luggage check.

How to recode a lock on a suitcase?

If you want to change the code on the suitcase, the first thing to do is to determine the type of lock. Take a close look at the lock on your suitcase. Usually they are of two types. mounted and fixed. Depending on the type of combination lock, you can talk about the sequence of actions for changing and setting a new code.

  • If the suitcase is equipped with a fixed lock, then after opening it, look for the lock button on it, which is usually located on the side of the wall. This is either a small lever or an almost imperceptible depression. Then press the lock button with a suitable tool (screwdriver, scissors, tweezers, etc.). If it looks like a small lever, then usually you need to move it from the starting position to the final position, for example, from top to bottom or from right to left.
  • While holding the button or lever, set a new digital combination, and only then you can release the lever and close the suitcase. Then immediately try to open the suitcase using the new combination. This will make sure you did everything right. Now all that remains is to remember the new password, but it is better to write it down, for example, in the memory of a mobile phone or tablet with which you will go on a trip.
  • If your new suitcase is equipped with a padlock, then you will have to do a similar manipulation, but with a metal arch. Unscrew it ninety or one hundred and eighty degrees (the angle usually depends on the model and manufacturer) and the lock should open. Then you can install your own code. To do this, gently press the arc into the lock, holding it in this position until you set the desired numbers. And the last movement. release the arc and unfold it to its original position.

What if you accidentally closed your suitcase after forgetting your password? In this case, the number selection method will come in handy. Of course, not everyone will have the patience to go through all possible combinations of numbers, because this can take a lot of time. However, sometimes this method even helps out. To do this, set the code to “000” and add one digit to the right, for example, “001”, “002” and so on. Some find it more convenient to check combinations from higher to lower numbers. set the code to “999” and move down. When choosing combinations, listen to specific clicks and check if the lock has not opened.

If all options for opening the lock have been exhausted, but the suitcase has not been opened, do not despair. Most likely, the lock just jammed. And even typing the correct password is unlikely to be able to open it. The only way out is to take the suitcase to a specialized workshop, where they will help you unlock the lock.

Bicycle Master Bicycles Accessories Components Service

We care about our clients and are ready to help you ️ in any situation

Warranty obligations are an integral part of high-quality customer service. one of the fundamental principles of our company

The warranty for bicycles of different brands includes insurance against factory defects of frames and components ⚙

We also provide warranty service support

The frame is only warranted for

Bicycle Master Bicycles Accessories Components Service

Your travel companion ‍♂️ ⠀ Stylish and practical pump with an original design that fits any bike ⠀ Helps you stay on wheels ⚙ on long bike trips length and cross-section, will provide the ability to easily inflate the wheel to 8 atmospheres ⚙ ⠀ Has a reasonable head, which ensures compatibility with all types of nipples without disassembly ⠀ Features ️ ️ Body and handle are made of aluminum on a CNC machine ️ Telescopic stem design Lever provides secure valve blocking ️ Fits easily in a more

READ  How the carriage is disassembled on a bicycle

Bicycle Master Bicycles Accessories Components Service

SETTING A PERSONAL CODE ON THE CODE LOCK ⠀… When buying a bike, the first thing you need to do is to protect your vehicle from being hacked! ⠀ Many people prefer a combination bicycle lock. due to the lack of a key, it seems more practical and convenient to use. In the end, the key can be lost, and the code only needs to be memorized. ⠀ Why do I need to change the code on the bike lock and how to do it yourself? ⠀ Since most manufacturers install a standard combination of numbers on code locks, for example, 1111 or 0000, we advise you to change the code on the bike lock immediately after purchase. ⠀ This procedure is not as complicated as it might seem at first glance. Below you

How it works

In its simplest form, a coded lock consists of several coded discs rotating on top of each other. Each disk platter is “responsible” for changing one digit. They, or rather the holes in them, work as closing elements. The cheapest models of such locks have 3 or 4 rotating cells with fields for entering numbers. The starting installation assumes a code with the icons “000” or “0000”. The owner, purchasing such a lock, independently sets a new numerical password, relying only on his own memory.

How to open a bicycle combination lock

The best way to protect your favorite bike is to keep your eyes on it, but the rhythm of our life is such that this does not always work. Then bicycle locks come to the rescue of cyclists. Modern anti-theft devices are quite diverse, but their essence is about the same: any bicycle lock clearly tells a potential thief that you should not even look at your bike, since there is no chance of stealing it. True, good protection with a special complex code will cost you more than a cable lock with a key. Any search engine will willingly tell you how to hack the latter, but how to open a combination lock on a bicycle, you will have to think for a long time and independently.

The simplest combination lock

The simplest and cheapest are considered anti-theft devices from the category of those that are attached to cases, bags, suitcases.

There are only three (sometimes four) windows on them, which means that you can go through all possible combinations of numbers from 0 to 1000 in less than 1 hour. In order to unlock such a lock, you must:

  • turn all the wheels so that they have the same numbers;
  • pull the ends of the device (with the correct combination of two adjacent icons, a small gap is formed between them);
  • alternately change the numbers and pull the ends until all the gaps appear.

After that, the device usually opens immediately.

Some models of such locks emit a light click when the digital icon is selected correctly. At the same time, you can feel the characteristic movement of the shifting teeth of the lock with your fingers.

If the device was found separately from the bike, you can unlock it by gently pulling the ends with the locking cables coiled around the back of the chair. In this case, you need to ensure that the cells are displaced correctly.

Cyclotech combination lock

Even a child, though a persevering child, can open a combination cyclotech bicycle lock. This procedure will have to be done in several steps:

  • on the first toggle switch, you need to set any number from 0 to 99;
  • then you need to find a special mark on the static part of the device, through which each selected digit will pass three times before moving to the next level;
  • you should go through the mark at each level until the set of numbers coincides with the initially set;
  • after that, you can begin to rotate the toggle switch on the third level counterclockwise to achieve the correct combination.

It may also happen that during the selection process you suddenly remember the necessary sequence: not by the memory of the heart, but by the memory of the fingers. The one who forgot the security code, most likely, did not need it for a long time, and a situation of urgent need is just capable of provoking a memory.

Sesame, open up!

If the memory fails and the code does not work, you will have to conjure up the lock for several hours, or even days. But don’t despair! You will definitely be able to open a bicycle combination lock by simply going through all the digital combinations. At the same time, you have an undoubted advantage over a bicycle thief: you have nowhere to rush, there is no one to be afraid of. you can solve the puzzle with a password indefinitely.

Let’s consider several of the most common variants of combination locks.

What about security?

On thematic forums, cyclists complain to each other that it is almost impossible to completely protect the bike: good code devices are also hacked and “cut off”. The question arises: how to protect the bike from thieves, if even with forgotten passwords it is so easy to remove the combination lock? There may be several tips:

  • Do not leave your bike unattended. Neither a supermarket security guard nor respectable passers-by are required to look after your belongings. Trust me they have enough worries of their own!
  • Before leaving the bike on the street, remove all gadgets from it and write off the serial number in case of contacting the police.
  • If you can’t leave the bike in a conspicuous place, it’s better to use expensive branded anti-theft devices, although they do not guarantee 100% protection.
  • Use U-shaped devices with thick metal pipes. they are harder to screw together with bolt cutters.
  • Let there be several locks at once. Then the hijacker will have to tinker with them longer. But there is a chance that he will only carry the wheels.

However, in the latter case, you will have to memorize two combinations of numbers. And forgetting is a special talent. So, if this is not the first time you’ve forgotten the bike lock code, just write it down in the same notebook or save it in the same file where you have collected passwords from e-mail, social networks and frequently visited sites. Perhaps the coveted code will remain Just don’t show it to anyone!

How to open a Cyclotech bike lock

Cyclotech code lock is a budget option of a security device that compares favorably with analogs in the same price category in size and cost. It provides an effective and simple anti-theft protection. This option is also convenient in that you do not need to carry a key with you to open it, which can so easily get lost.

The device is unusually simple to operate, even a child can handle it. In order to pick the lock, you need to set four toggle switches to the desired digital combination. However, if the code is forgotten or lost forever, you have to sweat a little.

To open the cyclotech lock, follow the instructions below:

  • let’s start by setting on the first toggle switch any number in the digital range 0-99;
  • the stationary part of the device has a specially applied mark, each of the selected numbers will pass it three times before moving to the next level;
  • at each level, you must go through the above label until the correct cipher is found. It is possible that in the selection process you yourself will remember the desired combination;
  • on the third level, it is necessary to rotate the toggle switch counterclockwise to achieve the correct combination.

How to open a bicycle lock without a key

Cable anti-theft devices are extremely popular due to their low cost, but opening them is a matter of a matter of seconds, not even minutes. You can open a new bike lock without even having a key. On the web, you can find dozens of videos describing this process.

Therefore, if you lost the key, do not be discouraged, but proceed according to the following scheme:

  • a knife blade, half of scissors, a flat screwdriver or any similar device is inserted into the keyhole;
  • the inserted blade rotates with force together with the larva;
  • “Bike safety guarantee” is rented in literally seconds.

Step-by-step instructions for opening a bicycle combination lock

Algorithm of actions if you forgot the code on the bike lock:

  • we set all the numbers to the same position, for example, to 1111. The opening method is to pull both ends of the device with each combination. The goal is the appearance of a small gap that occurs when two numbers are correctly adjacent;
  • continue to pull and change the dial until there are gaps between all the numbers;
  • when the combination is found correctly, the device will open without problems.

Advice! If the device that needs to be unlocked is not currently on the bike, but, for example, you found in the closet or on the balcony, the above scheme can be slightly simplified by providing tension by winding the lock cable around the back of the chair.

How to open a bicycle combination lock

Among the mass of anti-theft devices on the market, the most trusted by consumers is the bicycle combination lock. Unlike traditional devices that are mechanically opened with a key, opening them requires setting the correct digital combination on the rotary toggle switches.

The combination lock is fixed on a fixed support (bicycle rack), entangles quickly removable elements, preventing them from being removed.

We emphasize right away that the information below is not posted in order to push someone to unlawful actions. We tell you how to open a combination lock for those who, due to their own absent-mindedness or forgetfulness, have lost their password, and do not consider the option of biting the device with hydraulic scissors.

If we are dealing with the simplest code device, similar to the one installed on suitcases and cases, then we have to crack the code on three number wheels, which is about 1000 combinations. Enumeration of all possible takes usually no more than half an hour.

As you can see, it is very easy to break a cable lock from a bicycle without a key, therefore, for effective protection, experts insist on using several options for locking devices. Agree, if every student knows how to open a device, it cannot be considered reliable a priori.

How to open the Cyclotech lock if you forgot the code?

The Taiwanese firm’s combination locks are deservedly popular with Russian cyclists. These are inexpensive, convenient, and reasonably reliable security tools. They allow you to prevent theft of a bike from street bike parking lots, from entrances. They are also widely used for fastening motor vehicles, garden tools, advertising and other structures. The locks are made on the basis of a strong steel braided cable 1 cm thick, enclosed in an aesthetic polymer shell. Such a product is rather difficult to saw or eat with ordinary tools.

SECURITY: Bike Lock

Another important advantage of Cyclotech locks is the coded locking mechanism. It allows you to fasten and unfasten your bike without having to carry a key with you, which can be lost or forgotten.

The absence of a keyhole can also be considered an advantage of such devices, because many attackers use it to get to the secrecy mechanism and hack it. Also, this design solution prevents the ingress of dust, dirt and moisture, which can clog the lock and lead to its seizure.

But code bike locks have one drawback. It lies in the fact that the user must constantly remember the secret combination that opens the lock. Otherwise, he simply will not be able to unfasten his own bike. Situations when the owner of the bike lock forgets the code occur quite often. This usually happens after the bike has been idle for a long time. In such situations, you need to act quickly and decisively. Do not hope that you will be able to remember the code.

To understand how to act under such circumstances, you must first understand the principle of operation and design features of combination locks.

Cyclotech combination lock: how to open?

There are several ways to open the bike lock in situations when you forget the code:

Code selection method. First, we put all the numbers in the starting position. for example, 0000. After that we pull the ends of the cable in such a way as to create tension in the lock mechanism. Then we select any pair of keys and try all variants of combinations from 00 to 99. With the correct choice of two adjacent digits, the clearance in the locking device should slightly increase. After that, we proceed to the selection of a combination of another pair of keys. It is preliminarily recommended to try code variants that correspond to your year of birth or any other memorable dates.

Important! This method can only work on relatively old bike locks. New modifications are usually protected from such a method of opening, therefore, they will require the selection of each digit in turn. Taking into account the number of possible combinations (almost 10,000), on average it will take about 10 hours to sort out all the possible options. So you have to either stock up on tremendous patience, or call a specialist in opening lock systems.

READ  Do-it-yourself bike roof mount

Cracking a combination lock

Forceful autopsy. This method can be used in situations where you need to quickly release the bike and are willing to sacrifice the mechanism. To do this, you will first have to find the right tool. Cyclotech locks have good burglary resistance, so you won’t be able to bite into them with ordinary wire cutters or saw them with a hacksaw. The rope consists of a large number of interwoven steel fibers. They will jam between the saw teeth, making cutting difficult.

How to set/reset your own password for WordLock BikeLock CL-409-BL

Important! To cut the rope relatively quickly and without significant effort, you need to use a professional tool. for example, an electric angle grinder or hydraulic shears. The ordinary bicycle owner rarely has such equipment.

How the mechanism works?

The design of the lock consists of several rings with numbers printed on them. The mechanism also has a groove into which a cable is inserted with a special thickening at the end. It is only possible to remove the cable from the groove if all the code discs are in the correct position. The number of secret combinations ranges from 999 to 99999, depending on the bike lock model. Devices of this brand are usually equipped with four disks, which gives 9999 password options.

The overwhelming majority of models of locking devices imply the possibility of re-coding. To change the secret combination, you need to do the following:

  • Open the bike lock using the old code.
  • At the end of the code part of the lock, turn the ring until it stops in the direction indicated by the arrow.
  • Introduce a new combination so that the desired numbers line up in one line opposite the mark on the lock.
  • Return the conversion ring to its original position.
  • Close the lock and check its functionality with a new code.

The whole process takes less than a minute. In this case, this procedure can be repeated an unlimited number of times. Many bike experts recommend changing your secret combination regularly, especially if you often leave your bike in the same crowded area. This will reduce the risk of theft in cases where someone from outsiders saw you dial the code on the lock.

Specialist recommendations

When using code bike locks, it is recommended to write the code combination into the phone. It can be disguised as a phone number or simply made in the form of a note. It is unlikely that an attacker who wants to steal your bike will be able to gain access to your mobile device. But if you forget the code, you can quickly restore it in memory and you will never have a problem in order to open the combination lock. Instead of a phone, you can also use a classic notebook.

How to open a simple disc lock?

Ideally, a friend can help you. You will need to properly stretch the lock in different directions.

  • Turn the drum on the far right clockwise, keep the lock extended. If the drum turns without effort. the combination is not the right one, turn it and try again.
  • When you reach the desired number, the drum will behave differently. it will emit a characteristic click, lock or rotate with effort. There may be a small gap between the first and adjacent reels.
  • Then you can move on to the next one. Do the same with all the reels and the lock should open.
  • Please note: not all locks lend themselves to such hacking, and if you did everything you could, and he still did not give in, it’s time to run for a cable cutter or say goodbye to the lock.

How the bike lock works:

A simple bicycle lock with a code represents several drums (most often four), each drum is responsible for changing one digit.

When buying, all bicycle locks have a standard code 0000 or 1111, and the owner sets the combination at his discretion, and can only rely on his memory.

Therefore, if you forget the code, that is, there are two ways: either go behind the angle grinder / cable cutter (ejection lock, and you will be mistaken for a thief) or try to open it using the smart selection method.

We will not consider the method of usual selection (this is when you do this: 0001, 0002, 0003, etc.), but we will offer an alternative.

HOW TO OPEN THE BIKE LOCK IF I FORGOT THE CODE?

If you are reading this article, congratulations: you are in an unpleasant situation that happens to most cyclists at least once in your life.

You managed to forget the code from the lock, and here you are, at best, at home, at worst, in the bicycle parking, and wondering what to do.

Do not despair, breathe evenly. We will try to help.

How to open the Cyclotech lock?

It’s a little more complicated here. But it’s worth a try. The lock will have to be disassembled, opened, and then set a new code.

  • Open the plastic protection of the lock, picking it up with a screwdriver. we need to get to the locking mechanism that holds the discs.
  • Pull out the end pin and the spring that presses the drums with numbers together.
  • Next, you have to remove all the drums from the axle, after each of which there is a fixing washer. To remove, it will have to be twisted clockwise, and in the correct position it will succumb.
  • When you remove the last drum and pull on the cable, the lock will open.
  • Now the most interesting thing is to put the castle back together. To do this, follow the same steps, but in reverse order: put the drum, washer, drum again, washer again. It remains to throw the protective lever and re-set the code.

If you set a goal, you can crank up a bike rescue operation in 10-15 minutes. For a thief, this time is an impermissible luxury, but for a purposeful owner it is great. just right.

We hope these tips will help you reunite with your two-wheeled friend. But do not try to apply them to someone else’s bike: bicycle theft is punishable by law.

Try not to get into such alterations, write down the code in notes or take pictures as a souvenir, save your nerves, time and is great. Enjoy your trip and safe storage!

How to open the code bike lock if you forgot the code?

Bicycles are becoming an affordable and sustainable means of transportation for many people these days. And naturally there is a need to protect your bike from theft. Now on the streets it is impossible to imagine a situation where people leave their bikes unattended even for five minutes.

Anti-theft devices are very diverse: key locks, combination locks, U-shaped locks. often than not, cyclists prefer code products to key locks because it is convenient to keep the numbers in their head, as opposed to the key, which can be lost. In addition, thieves do not want to mess with such locks, with a cold-blooded look picking up the code in front of random passers-by. As practice shows, the most common problem of owners of combination locks and their main drawback is a forgotten code.

The information below does not call for illegal actions, but helps to open the lock to owners who, for some reason, have forgotten the code, but do not want to spoil the lock.

If your castle has the simplest code mechanism, similar to the one installed on diplomats and suitcases, then you have only three wheels in your arsenal, which means it will take about half an hour to go through about a thousand combinations.

Steps to open the combination bike lock:

  • We put all the numbers in one position. 1111. The point is to tighten the ends of the product with each combination. It is necessary to achieve the appearance of a small gap, which will appear when the two digits are correctly adjacent.
  • We pull and change the numbers until there are gaps between all the numbers.
  • When you find the right combination, the mechanism will open successfully.

Opening the Cyclotech bike lock

Code Cyclotech is a reliable budget option that differs from similar products in terms of price-quality ratio. Effective and reliable protection against theft, does not require a key during operation.

Even a child can handle the mechanism. To open the bike lock, you need to set four toggle switches in the required combination. But if you forget the combination, you have to sweat a lot.

The list of steps to open the Cyclotech lock:

  • Set the number from 0 to 99 on the first toggle switch.
  • There is a specially applied mark on the stationary part of the device. each of the numbers will go through it three times before moving to the next level.
  • At each level, you need to go through the above label until the correct cipher is found. Chances are that when you pick up the code, you will remember the correct combination.
  • At the third level, you need to rotate the toggle switch counterclockwise to get the right combination.

As you can imagine, a forgotten code is not a reason to resort to extreme methods like cutting a combination lock with hydraulic shears. It is enough to resort to the tricks that we described in this article.

How to change the code on the bike lock?

When buying a bike, the first thing to think about in order to protect your vehicle from burglary, of course, is the choice of a quality bike lock. It could be a u-lock, a chain or a cable, but something has to protect your bike while parking in the city, even if it is a dedicated bike parking in a decent location.

Many people prefer a combination bicycle lock. due to the lack of a key, it seems more practical and convenient to use. In the end, the key can be lost, and the code just needs to be remembered. although there may be problems with this, but now is not about that.

Why you need to change the code on the bike lock and how to do it yourself

Since most manufacturers install a standard combination of numbers on code locks, for example, 1111 or 0000, we advise you to change the code on the bike lock immediately after purchase. This should be done for basic safety reasons, because if someone decides to steal your bike, then the first combinations that the thief will enter will be just standard from the manufacturer. for good luck, so to speak. Unfortunately, some people leave the basic combination of numbers, which greatly simplifies the life of thieves and complicates themselves.

This procedure is not as complicated as it might seem at first glance. Below you can find step-by-step instructions on how to change the code on the bike lock in a minute:

open the bike lock using the old code;

from the end on the code part of the lock, it is necessary to turn the ring in the direction indicated by the arrow, this should be done all the way;

now we change the code. set our own combination, for example, 5603;

Please note that the combination must be placed opposite the mark or arrow on the lock;

be sure to remember the new code, otherwise you will have to break the lock from your own bike, which is much more difficult;

return the ring to its original position by turning it counterclockwise;

close the lock and enjoy the result.

To set a new code on the lock, you only need a minute. You can do such manipulations as many times as you like.

How to change the code on the bike lock?

Well, now you know how to change your bike lock code effortlessly. We hope you find this information useful. You can learn more about the range and features of using code anti-theft bicycle locks on the website of the company bikelock.ru.

Copyright © VeloLIVE.com All rights reserved. Partial copying of publications is allowed when placing an active link https://velolive.com to continue, an indication of the author is required.

If you liked the article, share it with your friends on social networks. Thank you!

  • (0)
  • Views
  • (31 803)

Self-recoding of the lock

You can change the lock code on any device that has this function. Transcoding may require partial removal of the lock or purchase of a special key.

The main types of combination locks

Before answering the question of how to change the code on the lock, you need to understand the types and design features of the devices. So, combination locks can be:

  • mechanical. The key on the lock can be typed:
  • by pressing the number keys (mechanical push-button lock);

Mechanical combination lock with opening plates

Mechanical device that opens when the code is set due to rotation

  • electromechanical. Such devices consist of two interconnected blocks: a locking mechanism and a code panel that actuates the bolt of the lock. The individual parts of the lock are electrically connected to each other. The device is controlled by an electric drive, and the secret part is equipped with mechanical elements;

Electromechanical coded lock

Locking device powered by power supply

Replacing the code on a mechanical disc lock

Disc locks are padlocks and mortise locks. The latest devices are usually installed on safes. Padlocks are more widely used. Let’s consider K \ how to change the code on a combination padlock equipped with discs. You should be guided by the following instructions:

  • the locking device must be moved to the “open” position;
  • fix the shackle of the padlock by pressing on it;
  • set the required combination of numbers;
  • lower the bow and check the functionality.
READ  Which motor wheel to choose for a bike

The process of changing the code on a padlock

Replacing the cipher on a mechanical push-button lock

How to change the code on a mechanical combination lock equipped with buttons? To do this, you will need to perform the following operations:

  • using a screwdriver of a suitable size, remove the keypad of the lock. This action is required to gain access to the control of the cipher;

Removing the Transcoding Keypad

  • inside the lock there are 10 plates (corresponding to the number of buttons), which are installed in a certain position. Each plate has a slight bevel on one side. Working plates, the numbers of which are included in the digital combination, which is the code, are cut towards the center of the lock. The rest. to the edges of the locking device;

All plates are turned to the edges of the device, which indicates the absence of a cipher

  • to change the combination of numbers that make up the opening code, you need to turn over the corresponding plates. To do this, you need to remove the lock element from its groove and rotate it around its axis.

Procedure for replacing the code of a push-button combination lock

You can learn more about the procedure for changing the code on a mechanical push-button lock by watching the video.

How to change the code on a combination lock with your own hands

Combination locks are divided into two main types: with the ability to change the numerical combination, which is a cipher for opening, and with a standard, unchanging code. If possible, it is more expedient to choose locks with a built-in function for replacing the working code, since they are distinguished by an increased degree of reliability. How to change the code on the lock? To do this, you should carefully read the instructions provided in this article.

Self-transcoding of the code lock

Change of code on electromechanical and electronic locks

Electromechanical and electronic locks are similar in design. The locking mechanism is controlled by entering a specific code consisting of different numbers. over, unlike mechanical combination locks, the numbers that make up the numerical combination of the code can be repeated.

To change the code on an electronic or electromechanical device, you must carefully read the instructions supplied with the lock. Changing the cipher can be done in one of the following ways:

  • the introduction of a code that transfers the locking mechanism to the programming mode;
  • using a specialized key.

To change the cipher in devices equipped with the transcoding mode, you will need:

    • enter the code that transfers the lock from the operating mode to the coding mode. This code must be included with the device when you purchase it. The introduction of the code can be carried out directly by the keyboard located on the lock or by an additional device that remotely acts on the locking mechanism;
    • enter a new numerical combination, which will later be the working code;
    • put the lock into operation mode and check its performance.

Changing the code of the lock using an additional device

Changing the code in locks using a key is carried out in the following order:

  • the key is inserted into a special hole, usually located on the side of the lock. In this way, the device goes into a mode in which it is possible to replace the cipher;
  • a new code is entered;
  • the key is removed and the operation of the device is checked.

The procedure for changing the code on the lock takes no more than 5 minutes. Before replacing the cipher, it is recommended that you familiarize yourself with the instructions attached to the locking mechanism.

How to change the code on a suitcase. instructions

The locks of new suitcases are always set to the factory code consisting of three zeros. 000. This standard set of numbers must be changed by the owner to prevent spontaneous changes or use by others for their own purposes. There are two types of locks on a suitcase or bag. padlock or fixed.

How to change the code on a padlock

To find out how to set a code on a suitcase with a coded padlock, read the following instructions and take the necessary steps:

  • Open the suitcase using the factory code.
  • With the lock open, turn the metal shackle 90 or 1800 and press it into the case.
  • Fix the recessed position of the shackle and enter new numbers by turning the dials on the lock body.
  • After installing a new combination, release the shackle on the lock.

Such a simple instruction will allow you to protect your suitcase with a new individual code on the lock and protect yourself from theft. In both cases, it is necessary to remember the entered numbers exactly in order to avoid the unpleasant situation of a locked lock at the most inopportune moment. If you are not sure that you can keep a set of numbers in your mind, use combinations that are familiar only to you, for example, your date of birth. You can, of course, write down the combination, keep it in your personal notebook.

How to change the door lock code

In everyday life, there are times when it is necessary to replace the lock on the door or set a code on it. Many owners believe that it is impossible to do this without preparation, and resort to the help of services that deal with similar tasks. However, it is possible to completely do without their intervention, using the proposed by us option of putting into operation a door code lock of the German brand “Format”.

How to set a new code on the suitcase lock

The design of modern models of travel suitcases includes a system with a combination lock, which prevents unauthorized opening. This foresight helps to keep content from being stolen in public areas such as an airport or hotel. However, not all newly-made owners of suitcases with a lock know how to set it up correctly, set a personal code that allows the suitcase to be opened only when typing it. It turns out that you can do this pretty quickly.

The procedure for setting the code on a fixed lock

To find out how to set the code on a suitcase, read the instructions below:

  • Open the suitcase by locking the factory code combination.
  • Block the lock code using a special button or lever on its side.
  • Keep the button pressed. If this is a lever, you need to move it to the right, then up.
  • When the button is pressed or the lever is set in the indicated position, it is necessary to change the code on the lock by setting the desired combination.
  • Immediately after completing the combination setting, release the button or return the lever to its original initial position.

How to set a code on a suitcase lock. detailed instructions

Nowadays, many modern briefcases and suitcases for travel use a special combination lock. This is necessary to protect your own documents, belongings and other items. Many people who have bought such a suitcase do not know at all how to set up a combination lock correctly. In this article, we will tell you how to correctly set the code on the suitcase lock so that the owner can easily open it only with the right combination of numbers.

Instructions

Typically, suitcase locks are factory set, so the combination for opening is three zeros. It is very dangerous to leave such a combination, so it needs to be changed as soon as possible. First you need to determine what type of lock on your product belongs to. fixed or hinged.

If your lock is fixed, you need to open the suitcase by setting the correct combination on the combination lock, then look for the lock code lock button. As a rule, this button can be found on the side wall, it looks like a small lever or button.

Find a thin sharp object at home and press it on the code lock button, if instead of the button there is a lever, then you need to move it to the right and up.

Hold the button in the preset position and change the combination of numbers on the lock. Then release the button or return the lever back to the position in which it was before. After this procedure, you will be able to open the suitcase only with the combination that you have set.

What to do if the combination lock is padded? First you need to open the lock by turning the metal arc 90 or 180 degrees, then bend it inward. While the arc is pressed inward, you need to change the combination of numbers. Enter new numbers and then release the lock clasp.

It is important to remember your code, and best of all, write it down. Write down the code in your notebook or phone, so you won’t be asked how to open your suitcase if you don’t remember the lock code. But if such a problem appeared, then we recommend that you read this article. How to open a suitcase lock if you forgot the code. methods and tips

Lever lock

To change the code, you must follow the instructions from the user manual. If it is not at hand, you need to carefully examine the lock on both sides. There must be an inconspicuous lever that needs to be squeezed out. While holding it down, recode the mechanism by putting a new combination of numbers on the disks.

After releasing the lever, the new code will be set. If you now set the factory combination, it will not help open the suitcase, so the password is worth remembering.

How to code a suitcase: built-in lock

Do you have a plastic polypropylene suitcase with snaps? Then, in most cases, the lock is installed like this:

  • Open your suitcase and make sure that you have a factory code. three zeros
  • At the bottom of the combination lock (or on the inside, depending on the model) there is a plate (or a metal lever), which must be moved from position A to position B (usually from bottom to top)
  • While holding the plate / lever, set the desired combination, for example 234, and return the plate / lever to its original position. Code installed!

Polycarbonate or fabric suitcases are usually equipped with a padlock or built-in combination lock. For them, the instructions are pretty similar.

Built-in combination lock:

  • Press the large PUSH button to make the sliders pop out of the lock
  • Check that the combination of numbers matches three zeros (000)
  • Find on the side of the lock a small button for blocking the code, it is almost invisible and is usually located on the side on which the sliders are located
  • Take a pencil or pen and press the lock button inward. Keep it pressed
  • Dial the desired combination of numbers
  • Remove the pencil from the lock button and press the large PUSH button. Done!

Button

To change the combination of a push-button suitcase, the lock is unlocked by entering the factory set of numbers. The button is usually placed behind a small hole on the front or rear panel. You need to pinch it with a pen or stylus. While holding the key, you need to set a new code sequence on the dial.

After releasing the button, the mechanism will remember it. Now it will be possible to open it only with a new password.

Built in

This lock is part of the structure of the bag and is bolted or riveted to the front top side. If you unfasten the lining, you can see them. One of the methods of mechanical opening is precisely to remove these fasteners.

A built-in latch operates the locking device in older suitcase designs or locks the zippers in modern models. On the outer panel there is a small window in which the dials with numbers are visible.

By choosing the right combination and pressing the button, the tongue is released and the bag can be opened. On some models, the button is missing and the spring unlocks the tongue immediately after the correct password.

Recommendations for quickly changing the code on a suitcase with any type of lock

Hinged

Here, the encoding method is different from those used for the built-in ones. To encode such a suitcase, you need to do the following:

  • enter the factory code;
  • pull out the bow and turn it 90 ° until it stops;
  • press the bow while holding it down;
  • reset the factory combination with the other hand;
  • put a new combination of numbers on the disks;
  • release the bow, turn it to its original position.

This will allow the padlock to remember the new code. After these steps, the bag can be closed.

Hinged

Versatile devices that can be used with any suitcase or bag by threading the bow through the zipper holes.

The lock case also has built-in dials. If the correct combination is set, the shackle is released, jumps out of the housing under the action of the built-in spring and the lock can be removed.