How to change pedals on a kid’s bike

Pedal design

The pedal is a unit that includes:

How to unscrew the pedals on a bike?

How To Remove Bike Pedals From a Bike the Quick & Easy Way | #AdventureBiker

The pedal is a simple part, but due to some mounting features and a very long service life, not every cyclist is able to remove them from their bike on their own. Why remove the pedals?

  • Change them after damage.
  • Pedal lubrication.
  • Connecting rod repair or replacement.

First, let’s look at how they are arranged, what types are there, what features should be considered, what tools to prepare before work.

Required tools and supplies

When replacing, as in repairing (servicing) the pedal, you will most likely need the following materials: cleaning rags, thinner or kerosene and heavy grease.

Removing and disassembling bicycle pedals may require tools such as:

change, pedals, bike

Some features

Since the system is constantly exposed to the environment against a background of severe mechanical stress, torsional problems can arise. In this case, two methods are used:

  • Soaking the bike pedal in kerosene or thinner to remove as much dirt as possible that is blocking rotation.
  • Heating of the connecting rod and axle. Slight deformation helps loosen the threads and remove the axle.

It is also important to carefully tighten the axle during installation so as not to damage the threads, which is a considerable problem in case of subsequent removal.

What tool are pedals removed

When using an adjustable wrench, be sure to pay attention to its thickness. The fact is that the distance between the pedal mount and the connecting rod is not large, and not every adjustable wrench will fit there. Some types of wrenches come with thin jaws that can be used. Open-end wrenches or special pedal keys are great for this operation.

READ  How to adjust the gears of your bike

Removing the pedals

After preparation, you can proceed with the removal process. For conventional mechanisms, it looks like this:

  • We move the system to the working side. in the direction of the steering wheel.
  • We try to carefully unscrew the pedals from the connecting rod.
  • Remove the plug at the end of the platform, open the lock nut.
  • Unscrew the lock nut, holding the axle at the connecting rod with the second key.
  • Remove the washer (also at the end).
  • Unscrew the cone.
  • We remove the platform from the axle, holding the bearings (it is better to remove them separately, if they are bulk, then put a rag or sheet so that they do not roll far).
  • Pedal removed and disassembled!

Regular Bike to Balance Bike Conversion

It is important not to forget that the left and right pedals are unscrewed from the connecting rod in their direction: on the right axis. the right thread, on the left. the left.

The contact devices are a little more difficult to disassemble, but they will not cause any problems. when twisting and disassembling, a puller is used, which should hold the axis with a small contact pad.

What to do if the thread on the axle “stuck” to the connecting rod and cannot be removed?

In case of “sticking”, it is recommended to process the place of the WD-40 fastener and leave it for a few minutes. Then try to unscrew again. You can use analogs. Kerosene is also suitable. But when using it, it is better to wait up to 3 hours.

It happens that these funds do not help. Then you need to use a longer lever. a large key put on an iron pipe will do.

There is another method: some suggest pouring boiling water over the problem area. This can reduce stocking density and really help. Others try to heat the junction with a soldering iron or a construction hairdryer.

Required tools for removing pedals

To remove the pedals from your bike, you need some tools and materials. Most bicycle owners, from the moment of purchase of transport, buy the necessary tools, materials that can be useful for repair or maintenance.

  • Carob, having a size of 15 mm.
  • Adjustable wrench. You need the correct thickness, because the gap between the mount and the connecting rod is narrow.
  • Hexagonal with parameters 6810 mm for selected models.
  • Bicycle set.
  • Puller is an optional device suitable for contact types. Holds the axle while turning with a key while scrolling.

You can purchase a wrench that performs the functions of both a hexagon and a 15 mm open-end.

  • grease. Professionals advise cleaning and lubricating parts;
  • rags (it is useful to wipe off the old grease, wipe off the dirt);
  • any solvent (you can use kerosene).
READ  How to set up hydraulic brakes on a tektro bike

When you may need to remove the pedals?

Removing the pedals is necessary in several cases:

  • In order to change to new or replace the connecting rods.
  • When transporting the bike, these parts are removed to reduce the volume.
  • During maintenance. There is a need for cleaning, lubrication. It happens that there is a creak or other suspicious sounds while driving, requiring inspection, and the pedals. maintenance.
  • To reduce space during long-term storage, including winter.
  • So that the bike cannot be stolen. Quite an effective way. But in this case, the pedals should be removed quickly. Therefore, there is a need to carry tools, as well as a storage bag with you at all times.

How to unscrew the pedals on a bike?

The pedal is a simple part, but due to some mounting features and a very long service life, not every cyclist is able to remove them from their bike on their own. Why remove the pedals?

  • Change them after damage.
  • Pedal lubrication.
  • Connecting rod repair or replacement.

First, let’s look at how they are arranged, what types are there, what features should be considered, what tools to prepare before work.

How to remove pedals from a bike. step by step instructions

Sometimes it happens that it becomes necessary to unscrew the pedals from the bike. Not all cyclists know how to do this and in what sequence.

To do this, it is better to study all the nuances of dismantling these parts. Then the bike owner can quickly solve the problem of removing the pedals.

How to remove the pedal from the bike and replace the connecting rod

The pedal is a simple part, but the long life can cause some disassembly problems. Therefore, many experts recommend systematic maintenance of the vehicle, despite the fact that many do not attach importance to this issue.

Let us analyze in which cases it is necessary to remove the pedals:

  • the part is damaged and requires replacement;
  • lubricate the elements;
  • replacement or repair of the connecting rod;
  • you need to understand the features of the system and understand how it works.

Before removing the pedal from the bike, the following tools should be prepared:

  • open-end wrench 15;
  • adjustable wrench;
  • if there is a non-standard solution of the manufacturer in the fastening elements, then usually the set contains a key for removing the pedal.
READ  How to Soften a Bicycle Saddle

How to Remove the Pedals from a Child’s Bike & Turn a Kid’s Bike into a Balance Bike

Removing the pedals from the bike is easy enough, but don’t forget about preparing tools and materials, as well as possible problems. The main thing is to keep the entire system in order, since in case of damage or other problems, the inconvenience of using the bike will be very great.

How to check the pedals before riding?

Before riding, check the general condition of the bike and, in particular, the pedals.

  • Clamp strength. That is, the quality of the tightening of the components. It may not be superfluous to tighten the nuts with a wrench.
  • No backlash. There may be a gap between the joints of the part, which must be eliminated.
  • The condition of the case itself. It must be intact, without cracks or chips.

The check is carried out as follows: you need to stand on the bicycle pedal, then make a few revolutions. Determine the quality of the axis scrolling visually and audibly. You can only ride when you do not hear an extra suspicious sound from the bike and you can not see the beat.

Every cyclist must remember: a twisted or broken part during movement is a high probability of injury not only to the owner of the bicycle, but sometimes also to the surrounding road users. This is why it is so important to check your bike before riding.

Bicycle repair and maintenance is not as difficult as it might seem. But it is necessary to do this. Prevention will not hurt either, check before each trip.

change, pedals, bike

Therefore, it is advisable to have an idea of ​​the design of the bicycle, its device, so that at any moment you can disassemble and assemble at least those parts that are easy to remove and install.

Pedal types

  • regular (platform);
  • contact;
  • combined.

Each of the pedal types has its own specifics: the first is created for any footwear, the contact type exists for grip with sports shoes and the universal third type, which has a platform on one side and a clutch mechanism on the other. The method of disassembly also depends on the type of part. The mechanism of conventional pedals is simpler and faster to disassemble.