How to attach the basket to the front of the bike

most useful bike accessories

Cycling gloves, a bike computer, bike lights, cycling clothing, and other useful items every cyclist can (and sometimes should) have.

GPS navigator for bike

The navigator is especially useful for those who ride a lot and visit little-known or new places. On the touch screen of the bike navigator, you can see the current location, route, as well as the cyclist’s heart rate and speed.

There are several options for bike navigators. For example, Schwinn Cyclenav communicates with your phone using Bluetooth and uses sound and a simple screen to tell you when to turn left or right.

15.1 Ordinary bike helmet

It is an important part of a cyclist’s outfit. It protects the head from impacts during falls and accidents.

The most important thing is that the helmet is lightweight, durable and has good ventilation so that the head does not sweat and does not create inconvenience while riding.

City bike basket assembly

12.1 U-lock

The most reliable and durable bike lock. It is very difficult to pick a master key for this lock, and it is also incredibly difficult to bite it with reinforcing scissors.


After you have used the lock to attach the bike to a rack, activate an alarm that will send a message to your phone if any movement of the bike is detected. The alarm in this image is called The Crocket and has a range of about 45 meters.

Cycling pants

Cycling pants are still very beneficial for their strength and reliability. They can withstand a lot of weight. And in bad weather, they can easily protect your belongings from the rain. Cycling pants are gaining popularity among cyclists.

When you decide to buy cycling pants, there is one important rule you should know. Choose a rack according to the size available to you and your bike. If the bike poles are too bulky, an emergency may occur. This is due to the fact that when riding, “trousers” of large sizes rub against the legs.

How to be with pets?

Basket for transporting dogs on a bike

Children and cycling

The child carrier mounts allow the basket to be used on an adult bike. Various wicker baskets and colored plastic baskets have been developed especially for young cyclists. Many modern models of children’s baskets contain drawings or stickers of your favorite cartoon characters. This attracts the baby’s attention, gives a sense of responsibility. After all, now, going on the road, not only mom or dad take luggage with them, but also the child.

Of course, there the baby can store his toys, children’s tools, in order to imitate his dad. A couple of sweets or cookies will also fit in the child’s trunk.

The carrying capacity of the baskets ranges from 1 kg to 3.5 kg. Just like trunks for adults, kids’ racks can be mounted on the handlebars and at the back. often, a child asks for a front trunk, as he likes to keep everything under his control.

Children’s baskets are notable for their low price, which makes them affordable for almost everyone.

Cycling baskets

Rear baskets can carry 10. 20 kg of load The robust models can support up to 40 kg of load. If your bike does not have special holes for attaching a rack, contact the bike workshop, where they probably know how to attach the basket to the bike.

The basket can be mounted on the trunk and on the bicycle handlebars using a universal mount. The device is easy to operate. In order to attach the basket you will have to spend no more than a minute.

The bike baskets are designed to resist bumps and falls. Their strength is very high. They are easy to clean and wash, while they are not afraid of water.

It should be noted that modern designers have tried to develop a luggage device. Now you can find bike baskets of any design. With its optimal dimensions, the product remains spacious enough.

Weaving from grapevine: furniture

Vine furniture looks very presentable and expensive. Such products are always nice to have in the house, so why not make something from this material with your own hands.?

Master class on making a chair from a grapevine:

  • At the first stage, the material for the work must be selected. A beautiful chair can only be made of high-quality material.
  • Further, the processing of the selected material should take place. The vine is cleaned, the bark is removed from it. Then it is dried and soaked in water for several days. Do not neglect this preparatory stage, since without it it will not be easy to work with rods.
  • The construction is being assembled. You need to decide in advance on the size of the chair. The vine is pruned according to the desired parameters of the product. The frame of the chair is made first.
  • After that, the legs should be attached to the frame. For the legs to attach firmly, in addition to the vine, you can use a rope.
  • Weaving takes place according to a simple scheme: horizontal twigs are superimposed on vertical ones, then braids are knitted and knots are woven.

Vine furniture looks very presentable and expensive

At the last stage, the product must be varnished or painted.

Going to the walls

After the bottom has appeared at the basket, they proceed to weaving the side part. When working, a vine of medium thickness is also used. The process begins with sharpening the ends, then you need to insert the twigs into the weaving, moreover, each knitting needle should have its own willow element. If the branches have a curved shape, then it is better to have them with the concave side.

attach, basket, front, bike

All old tips are trimmed at the very base. Further weaving is performed as follows: the new knitting needle must be bent to the left and passed under two adjacent branches, and then slightly bend upward. The same manipulations are done with the rest of the knitting needles. The workflow will go much easier and faster if all the rods are collected in a bundle and taken out one by one.

READ  DIY bike bottle cage

The vine on the sides of the basket should be thicker than the vine on the bottom.

It is best to form the walls into three willow vines, then the base will look more neat. To do this, you need to place them along the spokes that are next to each other. Now the left branch is taken. It is carefully bent to the right side, placed in front of two adjacent twigs, wound up behind the third and pushed forward. Do the same with adjacent branches. When the basket has two woven rows, the bundle should be untied and continued in the usual way.

Now, for each knitting needle, one more branch is added, it is advisable to select a vine of the same size and length. The elements are woven one at a time, while it must be borne in mind that their direction of growth moves along the left hand. The butt end of the twig is laid first behind the first knitting needle, the second is circled in front, and the third is again circled from the back. The next vine is already wound up behind the knitting needle on the right and continues to weave in the same way. Gradually weave new willow branches until the row is braided to the end.

You can get a good basket if you weave it according to all the rules.

They continue to weave with ordinary knitting, while you can start work from any branch, but you need to braid it first to the left side, using the same technique: back and forth and forward. Then the right element is woven according to the same pattern. Work continues until the basket reaches the required height.

Vine knotted weaving

The knot weaving technology does not require any special talents from a person. Anyone can cope with such work, the main thing is to have a desire.

For beginner craftsmen, it is best to start with simple jobs, for example, you can make a small basket. As for those craftsmen who wish to improve their skills and learn how to create something more complex, they are recommended to attend special courses on knot weaving.

In such work, it is important not only to be assiduous. Mindfulness and concentration are required from the master. If he follows the instructions, he will definitely be able to create a beautiful product with his own hand using the knot weaving method.

How to store them?

Next, the vine needs to be sorted. It is recommended to spread it out in length and width. Thin rods are stored with thin rods, and thick ones with thick ones. This will make your work easier in the future.

If the vine is green, then it is recommended to store it in the air. Thanks to this, it will dry out. If the vine was harvested in winter, then you can store it in the snow. However, the vine cannot lie under the snow for too long, this can destroy it.

Thin rods are stored with thin rods, and thick ones with thick

Do not store it in a damp room, as it will turn black and mold.

Required materials and tools

For the manufacture of baskets, boxes and other medium-sized products, it is necessary to choose long and straight processes so that they do not have knots or other chipping. It is advisable to select branches, the thickness of which is about 1 cm or slightly less, while they should bend well and not break. Good products come from willow with orange or red bark.

Experts collect the material on their own. It is best to harvest in winter or early spring, when the buds have not yet formed on the branches. Before starting weaving from willow vines, the branches are soaked in water and then dried. The work uses two types of willow:

  • Peeled. more suitable for making decorative items such as trays, flowerpots, baskets. After some time, this material turns from light yellow into a beautiful golden one, and the products acquire a special appeal.
  • Unpeeled. large products are woven from such rods. fences, gazebos.

In addition to the basic material, you will need special tools that will be needed during work. Before you start weaving, you need to prepare:

  • garden pruner;
  • tailor’s awl;
  • sharp knife;
  • pinch;
  • cleavers.

And you will also need a large bowl or barrel of water, where the material will be soaked. Experienced craftsmen use a spray gun when weaving from willow twigs, for beginners this process will be difficult, so it is better to process the branches in advance.

attach, basket, front, bike

This video shows how to weave a basket from a vine:

How to weave a vine basket for beginners

Weaving from vines and willows is a very exciting experience. In Belarus and other CIS countries, they are very fond of wicker weaving. Making vine crafts with your own hands is not only fun, but also useful. Knot weaving allows you to develop attentiveness and perseverance, and also improves fine motor skills of the hands. You can find many master classes for beginners, where it is described step by step how to correctly create a wicker basket from branches.

Weaving from a vine is a very exciting activity.

Preparing the vine

Before weaving, the willow tree needs to be prepared. First, the bark is removed from the branches, and then it is allowed to dry out for 5 days. It is best to leave the material outdoors. After the time has elapsed, when the willow branches are prepared and dry, they begin to work. It should be noted right away that a special technology is used when weaving the basket, namely:

  • the bottom and edges are woven with long solid rods;
  • for the walls use a vine split into several parts.

For splitting, you will need a special cleaver, which is made of hard wood. First, a twig is taken, at the very tip of which it is necessary to make a small incision. A cleaver is inserted into it. Due to these actions, the branch is split into several parts. After that, the split part is placed in water for several hours, and when taken out, the brown center is removed from it.

READ  Does not shift the chainring on a bike

Weaving a strong bottom is the main step in making a basket from a vine.

It is recommended to use a plane to properly handle the split rod. During operation, the material will have to be constantly moistened, for this you can use a spray bottle or keep the branches in water, and if necessary, get them out. Once enough willow has been prepared, you can proceed directly to weaving from willow twigs. It is better for beginner needlewomen to familiarize themselves with some master classes in advance.

Bicycle Basket Manufacturers

Many well-known global brands that manufacture bicycles of various models also produce their own mowing lines for accessories for these vehicles. Including. and a variety of bicycle baskets.

However, there are also firms that make only “mounted” elements for two-wheeled “iron horses”. Among the most famous companies working in this area are the Italian “Elite”, the American “Easton” and “Lizard Skins”, the French “Look”, the German “XLC” and “SKS”, as well as the Japanese “Mizumi”.

DIY How to Install a Front Bike Basket-Schwinn Brand Tutorial Demonstration [Schwinn Front Basket]

There are many attractive bike baskets on the market. However, if you love the DIY slogan, then this project is for you. To do this is simple, affordable and exclusive, because no one will have such a basket for sure.!

In order to get started, you will need the following materials:

Basket; 2 leather belts for clothes; Nylon or wire cable ties; Polyurethane adhesive; Scissors; Punch for leather or drill; Special pencil or marker;

Once you’ve selected your basket, roughly secure it in place with wire. Position your basket so the top edge is just above the handlebar tube where the straps are attached. Stretch the wire and fasten evenly between the center point of the handlebar.

Take a marker and mark the line at the bottom of the screed. This will be the line of the cut and the area through which the belt will be pulled.

Before cutting, position the belt loosely over the cut line marked with a marker. Make sure the strap fits properly without pulling or loosening.

Take a pair of sharp scissors and cut holes in the side of the basket. Cut neatly through the basket weaving.

Use polyurethane adhesive at the cut. This will keep the cut and breakage of the vine on the basket weaving.

After the glue is dry, pull the strap through the holes in the basket.

Repeat these steps with the second strap.

If you are using a woven strap, you don’t have to worry about punching extra holes, just pull the strap too tight so as not to ruin the basket’s woven structure and secure it. Do not cut off excess belt.

If you have a leather or vinyl belt, holes are essential. You can make a new hole in the belt with a hole punch or drill. To do this, do not remove the belt from the handlebar, carefully mark the puncture site and make a hole with a diameter of 5 mm.

Thread the strap through the basket and wrap it around the handlebar grip and secure it there.

Place the free ends of the strap inside the basket.

Then thread the free ends back into the slots so that they come out on the back of the basket.

Apply a small amount of glue to the back and the inside of the belt and then cut off the excess strips of the belt so that there are small “ponytails”.

Fix the bonding points with clothespins and leave them to dry completely.

After the glue is dry, remove the clamps. All is ready!

If you have a woven belt, tie the ends together and glue them lightly for a strong bond.

And don’t forget to put the flowers in the basket.!

attach, basket, front, bike

Permanent handlebar mount

The bracket is attached to the handlebar and is integral with the rest of the basket. Most inexpensive, but not universal mount.

Other materials

We’ve written about standard materials, but of course that’s not all. For example, there is a large layer of models of solid baskets, which are more logical to call “boxes”. with a stationary mount, they turn an ordinary bicycle with a basket into a cargo one, and they themselves are made of solid metal elements.

Homemade accessories also stand apart. Here you can find weaving from natural or synthetic materials, and fabric upholstery, and natural wooden boxes. there are simply no restrictions for imagination.

Is it possible to get by with a seat?

Previously, the child was transported in a simple seat on a frame. It is noteworthy that even now such a solution. the most economical and the simplest one. is in demand. But whether it is safe is a moot point. It seems to many parents that such a design is reliable, allows you to control the child and gives him the opportunity to see everything that is happening around. But compared to armchairs, a bicycle seat for a child is still not the best solution. Let’s analyze the points:

  • There is no level of protection in such a seat. In modern models of bicycle seats there is a side protection that prevents injuries to the child’s legs.
  • There is practically no fixation of the child, so the legs can easily fall into the knitting needles, and this is very, very painful.
  • Age and weight. Many parents do not consider these factors when choosing a bicycle seat for their child. In fact, children can be transported in it up to a maximum of 8 years old, but not older at all.
  • No head rest. Modern armchairs are complemented by a high back that can recline if the child falls asleep. A simple seat doesn’t have such a great function.

Thus, it is immediately clear that a seat is not the best option, especially if your plans include long trips with your child.


Many parents prefer outdoor activities with their children, and some even ride a bike to work. Especially for such active amateurs, Polisport has created a range of practical, ergonomic and comfortable chairs. Simple in design, each chair is robust and lightweight to withstand many days of use. The popularity of the products of this brand is due to the presence of an exclusive fastening system, thanks to which you can install the seat without using any tools. The child protection system is also thought over: special restraining and safety belts in combination with side protection allow you to ensure the safety of the baby when traveling. For a child seat on a bicycle, the price depends on the specific model of the seat. On average, but these are the simplest models.

READ  Does the buttocks swing when cycling

Inspect your bike

Yes, yes, before choosing a seat for a child, evaluate your bike, its profile and frame features, as this is where the seat will be attached. The best option is a round frame on which you can attach child seats to bicycles such as Flinger, Belleli, Hamax. If the frame is oval, you can choose restraints from brands such as Polisport or Belleli.

Equally important is the frame diameter where the bike seat will be attached. It is important to read the full model descriptions to see if the fasteners for a particular model are suitable for the size of the rack or frame. After you have completed all the necessary measurements, it’s time to evaluate the design features of your vehicle. Any non-standard solutions in the form of unusually planted headstays, frame tubes or the presence of a rear shock absorber can interfere with a high-quality installation of the chair.

Study the child

You need to choose chairs for children on a bicycle in accordance with the weight and height of the child. For example, on the front frame, you can carry children up to 15 kg and small stature, and on the trunk you can place a chair designed for a weight of 18 to 22 kg. But do not be limited by the size of the chair, because the child can be large, and then he will not fit into a spacious, in general, device. So it’s better to try on an accessory.

Modern chairs for children on a bicycle are a variety of models that have a well-thought-out design. In addition to size, they can differ in the maximum rise of the seat belts or in the style of design.


This German brand offers a wide range of seats that are unique in terms of safety, reliability and comfort. Thanks to the introduction of the latest technologies, the company can offer thought-out designs to the smallest detail that will ensure the comfort and safety of the child. Among the popular models of this brand, two can be distinguished:

  • JOCKEY RELAX. This bicycle seat ideally combines maximum safety and a high level of comfort. The adjustable backrest can be moved from an upright position to a reclined position. The maximum protection against the spokes has been thought out, there is a footrest adjustable in various positions. Installation is very simple: the kit includes a sturdy spring steel bracket. The seat is suitable for touring and sports bicycles and attaches behind the driver’s back.
  • JOCKEY COMFORT. This child seat offers a high level of comfort. The headrest is adjustable in 9 positions, a comfortable system of seat belts that can be adjusted with one hand is thought out.

For positioning on the frame

Front seats are called front seats. They can be mounted on the headset, under-seat tube, or down-tube. Such models are designed for weight up to 15 kg. A child seat on the front frame is convenient because you can control the child while driving. At the same time, the trunk remains free and can be adapted for specific purposes. Among the disadvantages of the front models are:

  • small size and, as a result, limiting the weight of the child: up to a maximum of 15 kg;
  • it will not be very convenient for the driver himself to transport the child, which will take up enough space in the front.

Many modern brands offer comfortable child bike seats. With their compactness, they are distinguished by their comfort and high level of safety. Popular models include the Polisport deep-seated bicycle seat for children from three to five years old. The advantage of the model is in the fixing bumper.

Step 2

Insert the Engraving Cutter 107 into the Dremel 7700 and trace the outline.

Step 1

Cut a piece of tracing paper to fit one side of a wooden box, planter, or wastepaper basket. Transfer with a soft pencil to tracing paper the basket weaving pattern (we have shown a simple pattern of the interweaving of stripes alternately passing under and above the raffia fiber (a tropical palm tree, from the leaves of which fiber is obtained; baskets, hats, etc. are weaved from it)). Secure the tracing paper with tape and transfer the drawing to the bottom.

You will need:

Step 3

Finish the details with the Dremel 7700 and Engraving Cutter 106.

Reusing an old bike

Create an atmosphere that evokes memories of the past: Use nostalgically creative plantings of spring and summer flowers in carved wooden boxes that can either be placed next to an old bike or hung from it by leaning the bike against an old ivy wall. Such a composition will certainly arouse admiration and will be discussed for a long time, no matter how large or small your garden or yard. Let the bike rust, taking on an ever more distinct imprint of the years gone by, although you will plant new flowers every year.

Attaching the basket to the bike or to the garden wall

If you want to attach the basket to a bike or garden wall, drill two holes in the top of the basket with the Dremel 300 Series and the Dremel 636 wood drill, then use a sturdy metal clip. Another option is to place the basket next to your bike, which will look like a painting on your backyard wall. After that, you can either place a fine wire mesh inside the wooden container and use it to create a composition of cut flowers, or fill the box with earth and plant beautiful roses and climbing ivy.