How to attach a flashlight to a bicycle handlebar

GPS navigator

This gadget will come in handy not only in the car, but also on the handlebars of the bike. The only difference is that the cards are needed a little different. At a minimum, they should be marked with walking and cycling paths. So just taking the gadget from the car and attaching it to your two-wheeled friend will not work. To date, there are not very many companies engaged in bicycle navigators. But the same Garmin has a couple of interesting models.

These navigators have special maps that include bike routes. It also has a POI database built specifically for cyclists. In principle, there are practically no special differences in comparison with the automobile. Unless these navigators are made vertical, not horizontal, it is so much more convenient on a bicycle. Well, some more models can work as a cycling computer, so you don’t need to connect several gadgets at once. But the devices are expensive, and even more expensive than car counterparts. So, the most inexpensive Garmin Touring will cost 20 thousand rubles. However, if you like to travel by bike, then you cannot do without such a gadget. But if you need to lay a simple city route, then a phone is enough, then we will tell you how to attach it to the steering wheel.

Bike computer

Perhaps the most popular device for bicycles is the bike computer, that is, an improved speedometer. As a rule, these gadgets are able to measure the speed of movement, calculate the distance and show the time. In principle, they have enough functions for their cost (from 1000 rubles). But there are also more advanced models. They cost, of course, several times more expensive, but there will be more opportunities. Some devices already have a built-in GPS module, some can connect to sensors using ANT technology. For example, if you have a pedal power meter, the information from it will be displayed on the screen of the bike computer.

Thanks to the GPS receiver, these cycling computers can track the distance traveled, speed, location and altitude. As with exercise bikes, calories burned can be calculated using this device. But you always have to pay for pleasure. Such models cost from 10 thousand rubles and more. So, for the O-synce Navi2Coach you need to pay 12 thousand rubles, for the SIGMA 08171 ROX 8.1 with a heart rate monitor. 17 thousand, and for the Garmin Edge 510 with a touchscreen you will have to pay about 30 thousand rubles. If you are cycling professionally, then such a cycling computer will probably come in handy for you, but amateurs should take a closer look at something simpler.

SIGMA 08171 ROX 8.1 bike computer with heart rate monitor

There are devices on the market that are inexpensive, but also have impressive functionality. Of course, there is no GPS tracker in them, but they know how to calculate speed and measure distance. Some models even have a thermometer, a trifle, but nice. But

READ  How To Teach A Child To Ride A Two-Wheeled Scooter

Locator

Now all car companies are concerned about safety, including ensuring that cars coexist peacefully on the road with bicycles. Some cars already have radar systems, but what about a bicycle one? The risk of an accident on the road depends both on the driver of the car and on the athlete on the “iron horse”. In order for the cyclist to also be aware of whether there are cars around him, the Backtracker bicycle radar was created.

Sign in

Guest menu

Mounting

This mount is ideal for tough night bike rides. The mounting holder for the lantern is most often an integral part of a particular lantern, or it is suitable for a strictly defined model of the same manufacturer.

Installation is done either on the frame or on the steering wheel. With such a mount, you can absolutely not worry about the degree of fixation.

  • high degree of reliability;
  • will not loosen up over time.
  • rather complex installation system;
  • the uniqueness of the mount eliminates the chance of replacement;
  • custom design can attract intruders.

Functions

There are a huge number of bicycle lights, differing in power, size and other parameters. And they all perform two main functions:

  • lighting of the front space;
  • marking the visibility of the bike on the road.

This is why it is so important that the flashlight is firmly attached to the bike.

There are several types of bike racks for bike lights on the market today. In order to figure out which one is the best option, it is necessary to consider each type, having studied its pros and cons.

Semi-cylinder

Semi-cylinder removable mount. this type of bracket is called the golden mean between hard-to-remove and elastic mounts. Installation on the steering wheel is done once, while there is the possibility of changing the lamp itself. Ideal for any bike model or riding style. Any flashlight, even tactical, can be used.

Bicycle mount for flashlight/Bike Flashlight Holder

  • universal type of installation;
  • does not get loose over time;
  • the possibility of unlimited use of a flashlight.

It’s important to know! Exactly the same types of fasteners are used to mount the rear bicycle lights. Some of them are already equipped with a flashlight, while others are purchased separately.

attach, flashlight, bicycle, handlebar

Choosing a bike light mount

Safe cycling at night can be provided by a bicycle flashlight, which will not only illuminate the road, but also warn other drivers and pedestrians about your movement. How is the lantern attached to the vehicle. this is the question we will be discussing in this article.

READ  How to clean disc brakes on a bicycle

Rubber

The removable elastic rubber bike carrier is visually presented in the form of a silicone strap equipped with a low-power bike flashlight. It will be possible to fix it independently for each person on the handlebars, frame or spoke of the bicycle. This mount is most often equipped with auxiliary and side lights.

Some models even have a silicone case, which, together with a small battery, makes the flashlight ideal for quick identification of vehicles.

  • temperature limitation according to which the strap cannot be used in cold weather;
  • fixation is rather weak;
  • the service life will be short-lived.

Is it worth it to do it yourself?

Many cycling enthusiasts, thinking about installing a flashlight on their bicycle, decide to build a bracket to mount it on their own:

On the Internet, you can find many ways to build a lamp holder from available tools. That only is not used for the set goal. They use clamps, fasteners for water pipes, unusual structures using wax, mounts for car headlights, plastic bottles, hacksaws with lighters and much more.

This may make some sense, but these constructs can be completely unreliable. The aesthetic component is just as important. Agree, fasteners from a plastic bottle will not look too elegant.

Among other things, making your own bike light mount, you will spend a huge amount of time starting from searching and purchasing elements, ending with the process of creating and installing.

Turn a Flashlight into a Bicycle Light!

Another interesting fact: the lack of confidence that the resulting design will turn out exactly as it was planned. Otherwise, you will have to pay both for the attempt to improvise and for the ready-made bracket, which will need to be purchased after.

Light parameters

Light parameters are one of the main factors when choosing a lamp for a steering wheel. When choosing, you need to pay attention to the distance of the light beam and brightness. And also an important parameter is the angle of illumination. Give preference to models that have a large angle of illumination.

The best light parameters are provided by the steering wheel lights with a textured reflector. The luminous flux is uniformly directed in all directions. At the same time, the road surface is illuminated perfectly.

The range varies from 30 to 100 m. Give preference to models with a range of more than 70 m. Such light parameters allow you to move along the tracks.

Brightness can be adjusted separately. There are several backlight modes:

  • Low brightness.
  • Average.
  • High brightness.

In cheap models, this parameter is not regulated.

As a rule, the purchase takes place in the morning. Therefore, it is quite difficult to check the lamp on the steering wheel. In this case, you need to pay attention to the packaging.

READ  How to install the derailleur on a bicycle

The luminous flux value must be indicated on the box:

  • 10-30 lm. Used to illuminate the road right under your feet.
  • 300-500 lm. Used for driving on highways.

Types of steering wheel lights

There are two types of steering wheel lights:

  • Removable. It is very popular with cyclists. If necessary, these lights can be removed.
  • Non-removable. Characterized by high quality and durability.

How to attach a flashlight to the steering wheel?

First you need to choose the type of attachment. Swivel mounts can be used. Or Velcro fastening.

Mount installation process:

  • First you need to disconnect the clamp.
  • After that, the clamp is hung on the steering wheel.
  • Now you need to insert the lantern.
  • Adjust if necessary.

Additional features of bike lights

Let’s take a look at the most popular additional features:

attach, flashlight, bicycle, handlebar
  • Canister construction. This design reliably protects the device from unwanted external influences. The canister construction is designed with a large margin of safety.
  • Non-contact switching off and on. There is a side button on the body. It activates a special motion sensor that turns the device off or on.
  • Sound signal.
  • Magnet. With the help of a magnet, you can remove objects from hard-to-reach places.
  • Auto power on.
  • Clock.
  • Smooth brightness control. If necessary, you can adjust the desired lighting level.
  • Built-in player.
  • Focus lock. Focus adjustment is smooth. Focus can be locked if necessary.
  • Charge indicator.
  • Adjustment of the light beam. You can change the shape of the light beam.

Why buy a handlebar light?

The main purpose of a bicycle lamp is to ride in the dark. Of course, a bicycle flashlight is optional. But, moving in the dark without a flashlight, the cyclist puts himself at risk.

This accessory performs the following functions:

  • Indicates the presence of a cyclist on the road.
  • Illuminates the road.

The number of cyclists on the streets of cities is simply amazing. This type of transport is becoming more and more popular. Regular cycling is good for your body. This mode of transport demonstrates concern for the environment.

Cycle lights are above all about safety. The vehicle lighting consists of rear and front lights. The main lighting component is the front light.

The steering wheel lamp is practical and convenient. It is a light source that provides visibility. Modern models can work in bad weather conditions (rain, fog, mud, etc.).