How To Attach A Child Seat To A Bicycle

Mount the bike seat to the seat tube

The child seat usually comes with:

  • Metal arc;
  • Gaskets
  • Fasteners;
  • Bolts;
  • Nuts.

The arc is installed in a socket specially designated for it from the inside of the seat of the groove. For reliability, insert a gasket and a bolt into the hole from below, and then tighten it with a thirteen key. Next, you need to mount the mount model itself. To do this, connect both parts from the kit, insert the gasket and attach the mechanism to the frame with screws. The fasteners must be held as high as possible so that in the future nothing will catch on to it.

Four bolts are inserted into the structure. On the second side, nuts are screwed onto them. Then the screws are tightened with a hexagon five. Please note: It is recommended to mount the rear frame fasteners higher so that the bike seat does NOT touch the wheel when damping. The gap should also be made higher: about 5 cm from the wing or wheel.

How to attach a child seat to a bicycle?

Child bike seats will be a useful addition to the bike. They can transport babies who have not yet mastered this type of transport on their own. After purchasing the product, you must install it correctly. There are two options for bike seats, the first attaches to the rear seat tube or rack, the second attaches to the front frame. Consider both installation methods.

Reliable rear: in the child’s bike seat on the trunk

If you need to concentrate on the road, you do NOT want to place the seat on the bike frame, choose a bike seat model for your child or a tube under the motorcycle saddle.

Rear seats for children differ from the front ones and have obvious advantages:

  • Nothing distracts the bike rider from the road. this is 1 to safety;
  • The high back and wide seat of the child seat on the bicycle trunk minimize the load on the child’s musculoskeletal system;
  • You can install a rear bicycle seat on almost any adult bike: light or heavy, with or without a trunk, while the weight of a small rider can be up to 22-24 kg
  • If the child seat is installed on the trunk of a bicycle, the parent blocks the child from the wind.
  • Child bike seats on a frame or handlebar are acceptable for use on bikes with a rear shock absorber.
  • Even 2 straps can freely hold the child in the spacious bicycle seat on the lower frame or trunk.

Despite these advantages, rear bicycle seats are not ideal. Their cons:

  • Sitting in such a bicycle seat, the kid will NOT be able to enjoy the views of the area to the fullest (your back will obstruct the view);
  • The design is NOT intended for large parents with a heavy pelvic girdle;
  • You will NOT be able to constantly observe the child (you will not see if the child is scared or wants to sleep)
  • You will have to give up the trunk (in favor of a small basket in the steering wheel)
  • Child bike seats on a frame or handlebar are acceptable for use on bikes with a rear shock absorber.
  • Neither the bike rack nor the seat tube bike seat are suitable for models with a rear shock absorber.

Useful article? Then bookmark the site: we regularly have relevant materials for the most athletic.

Front bike seat

I have often come across the opinion that the front is better, because in this case you can see the child all the time. But in my opinion, this position greatly reduces the cycling component in Pokatushki.

How To Attach A Child Seat To A Bicycle

In addition to the inconvenience of having a child between you and the wheel, which reduces agility, distraction can also greatly affect driving.

READ  How Pressure To Pump Bicycle Wheels

The child will constantly try to talk, ask, turn his head. People also note that if the frame is short, then you can easily get yourself in the chin with the back of your head.

What kind of riding is there. so, a ride in the park, it is unlikely that you will go on a bike trip with a child in this form. In addition, the safety of the baby is equally important. All front seats are miniature, without good head protection and lateral support.

Therefore, I make an unambiguous conclusion. I would not buy a front seat. I do not have to constantly see the child, let the mother, riding behind, look. # 128578;

Rear bicycle seat

I think the choice of a true cyclist is the back seat. This option allows you to maximize the ride quality of the bike. Good bike seats have very serious passenger protection, and in my opinion, this is extremely important.

Mounting methods, as a rule, are either on the trunk or on the seat tube. I like the latter more. they have excellent shock absorption, and this is an important factor if your baby is still small.

An important function of a child’s bicycle seat is the ability to transform into a sleeping place. For cyclists, this is simply paramount, because the time spent in the saddle is calculated in hours, and the child should be able to fully sleep.

I studied a lot of options on the seat market, and came to the conclusion that one of the best is the model of the Norwegian manufacturer Hamax Caress.

Robust seat with smart harness system, strong side protection and shock-absorbing seat tube attachment.

The seat has a tilt adjustment of up to 20 degrees, which makes it an excellent bed for your little one. Can carry children up to 22 kg. The weight of the chair itself is 4 kg. An excellent option for both walking and long-distance cycling.

The pleasure is not so cheap. about 5900 at Wiggle, where I buy all my bike accessories. But in my opinion. the price is quite adequate, because the thing is bought for at least several years, and the child may not be the only one in the family.

As a much cheaper option, you can consider the Smiley model here is the same Hamax. This copy does not have a reclining system for sleeping in a horizontal position, but it is NOT too different in design. the same cushioning and seat tube mount.

In case of rain, there are ponchos from the same Hamax company:

Children’s bicycle seat, how to choose. Bicycle seat for a child, on a frame, on a trunk, tips for parents

Home ┬╗Accessories┬╗ Child bike seat: how to choose a comfortable accessory

Active mothers and fathers strive to introduce children from the first year of life to a healthy lifestyle. In cycling, babies need adult attention and responsive guidance. A modern parent can install a comfortable child seat on a bicycle and enjoy cycling with a child.

Fitting the correct child safety seat guarantees safety for the little rider: the baby’s feet will NOT reach the wheel spokes and the elastic straps will NOT allow the young rider to fall off the fast iron horse. You can choose a child seat for a bicycle both by manufacturer and price, and by design.

A child seat on a bicycle should have a high back so that the child does NOT throw his head back while riding, and the armrest is better to be ergonomic and soft: this will reduce the load on the shoulder girdle and arms of the baby and help avoid injury. In the manufacture of the body of a child seat for an adult bicycle, manufacturers can use plastic of different qualities. The best option is a body made of impact-resistant plastic like ABS, which is used by leading European manufacturers of high-quality helmets for bikes and children’s bicycle seats.

How to choose a child bike seat

A small cyclist will most likely grow up in a family of bike addicts. after all, what kind of bicycle dad can resist taking a child with him on a ride.

In this post, I want to consider the various options for transporting the baby with the parents and the associated difficulties. I will say right away. now I will not talk about a children’s bicycle trailer for the reason that this is a specific thing and costs a lot of money.

The very first question parents ask themselves is which bike seat to choose: front or rear.

Front view: front-type child bike seat

Many mums and dads prefer the bike-mounted child seat because they want to keep an eye on their little ones, and the front mount allows constant eye contact with the child. In a child bicycle seat on the frame, you can ride a baby up to 3 years old, including off-road. However, experienced parent cyclists say the frontal design has several disadvantages:

  • Firstly, an adult driver is distracted by a small passenger, and this increases the risk of an accident;
  • Secondly, child seats in front of the bicycle are made small: a short back and narrow armrests do not protect the child’s head well and do not provide sufficient lateral support for the child’s spine.
  • Thirdly, lightweight aluminum bicycles for adults lose maneuverability if the load on the front of the body is more than 10 kg.
  • Fourth, a regular front child seat will NOT fit on a bike with a low frame (the child will hit his head on the driver’s chin).
  • Fifth, when the baby rides in the seat in front of the bike. He is exposed to the wind even more than the parent (windproof clothing solves the problem).
READ  How to disassemble a chainring wheel on a bicycle

Sometimes you can find front child seats on a bicycle, which are not attached to the bike rack, but to the steering column, thus Solving the problem of a short frame. Such devices can only withstand light weight (up to 15 kg), but they are compact and neat-looking, so parents of toddlers from one to two years old prefer to install such bicycle seats in front.

The optimal number of belts in both cases is 4. Fasteners Should be designed so that the baby cannot unfasten on its own.

The advantage of the seats mounted on the bike frame is the following:

  • Free trunk (child bike seat on the front frame allows you to carry purchases and the child on the same vehicle)
  • They give a good view of the road for the child (this is important, because children receive most of the information about the world through the visual channel)
  • When choosing a child seat designed to be mounted on a bicycle frame, the build of mom or dad does not matter;
  • You will be able to control the physical and emotional state of the baby (if the baby gets tired, you will find out about it right away)
  • Child bike seats on a frame or handlebar are acceptable for use on bikes with a rear shock absorber.

Universal car seats

Manufacturers offer models in which Latch or IsoFix are supplemented with anchorages for three-point seat belts. Ideal for families with several cars or those who plan to attach a child car seat both in their own car and in a taxi.

IsoFix mounts

Such a system was developed back in the 80s by Romer and Volkswagen. It was only in 2011 that IsoFix fasteners became mandatory for European-made cars, but even cars of earlier years of production most often have the appropriate opportunity. The advantages of the IsoFix fastening system are as follows:

  • Reliability. The automotive part of the locking mechanism is rigidly coupled to the power frame of the machine, which provides protection against displacement in any collision.
  • Easy to install. Even a woman can install it, since the car seat is attached in the car by simple snapping, which does not require physical effort. In this case, incorrect installation is completely excluded, and only violation when fastening the child can reduce the effectiveness of protection.

Undoubtedly, if your car is equipped with the IsoFix system, the choice should be stopped on such a car seat, since this is the safest option.

Latch and SuperLatch system

Analogue isofix, Used in the American market, the only difference is that from the side of the chair the fasteners are not represented by a metal bar, but by dense straps with a carabiner lock. Some elasticity in the strap reduces the impact of a collision.

Keep in mind that a car seat with Latch can be installed in a car with IsoFix, because the length of the straps allows slight deviations in the position of the brackets. At the same time, a chair with IsoFix can either approach the car with Latch or not get into it, depending on the location of the fasteners.

Where to fix the child seat in the car

The child should be seated at the safest point in the vehicle where the likelihood of injury in an accident is minimal. A lot of research has been devoted to the selection of this Most Protected Position, since it is necessary to fasten the child seat not only technically correctly, but also competently. The study of the behavior model of drivers in a critical situation did not give an unambiguous result:

  • For countries with right-hand traffic, it was recommended to place the child car seat in the rear seat on the right, as it is believed that, when avoiding a collision, the driver will try to pull onto his side.
  • According to other sources, the seat behind the driver was called safe. In an emergency, the instinct of self-preservation should be triggered, thanks to which the driver will spare his side of the car, introduce it from a blow.
READ  How much to swing the wheels on a bicycle

These recommendations are based on psychological aspects, and are ruthlessly refuted by crash tests. Based on their results, the safest place was found in the center of the rear seat. Here, the child is protected from body deformations and fragments during side impacts, and the free space in front reduces the likelihood that the baby will be pinched in a frontal collision or rear impact. If we are talking about seven-seater cars with three rows of seats, then you need to place the chair in the middle of the second row.

Installing a car seat in the front seat is convenient for mothers who often travel alone with their baby. When the baby is near, it is convenient to give him a bottle or a rattle if necessary, and not be distracted from driving. It is undesirable to do this, but it is permissible only with disabled or missing airbags.

Installation on IsoFix or Latch

The scheme of actions is extremely simple, and fastening will NOT take a lot of your time:

  • Find the U-shaped metal brackets at the junction between the seat and the back of the back row.
  • If your model comes with bracket rails, attach them to the brackets on the vehicle.
  • Bring the brackets to the brackets and slide them in until they click into place. To attach the Latch, click on the carabiners on the brackets.
  • Some models have an additional floor bar that must be adjusted in height.
  • If the manufacturer has provided for the Top Tether anchorage, then its belt is fastened in the anchorage located in the luggage racks or on the back of the seat back.

How to mount a child seat in a car: Step by step instructions. Mounting options: pros and cons

Statistics confirm the fact that a high-quality car seat saves a child’s life in 90-95% of cases. But the same stubborn statistics say that in 80% of cases, parents neglect the rules of fastening, due to which the effectiveness of protection drops rapidly to zero. The way a car seat is fastened depends solely on its design and the characteristics of the vehicle. Based on how the child seat is attached in the car, the following options are distinguished:

Fixing with a three-point belt

  • The vehicle is NOT equipped with a second system mount. You can fix a child seat in almost any car, provided that it is equipped with standard seat belts for rear passengers. Before buying, be sure to check if the length of the belt is sufficient. usually problems arise when installing group 0 or 0 carriers.
  • The family often uses taxi services. But not all taxi services offer cars with child seats, and when you call you do not know if the car will have a second type of mount.

The disadvantage of fixing with a three-point belt is the complexity of the installation, due to which mistakes are often made. The results of crash tests confirm the lower reliability of such a system, but nevertheless, if you fix the child seat in the car correctly, then the child will be safer than without it.

Safety rules: how to fix the car seat in the car

Choosing a car seat for your baby is a responsible mission. Parents study the results of crash tests and acquire the most reliable models of the Child Safety Council, but a frivolous attitude to the installation in one fell swoop negates all efforts. The magazine “Our Fidget” will tell you how to fix a child seat in a car, and at the end of the article will clearly show the algorithm of actions so that in a critical situation the car seat will fully cope with its task.