How to attach a child seat to a bicycle

Child seat for bike

Seat for a child on a bicycle frame, Child seats on a handlebar and on a trunk.

Previously, children were placed on the trunk or on the frame, which was fraught with accidental falls. The situation has changed with the advent of child seats with different mounting options. Now even a toddler who has recently learned to sit will be able to go on a trip with you. In addition, cycling with a baby will be useful both for the health of newly-made parents and for children, future cyclists who, from childhood, will begin to get used to riding two-wheeled vehicles.

Safety first

This will prevent the baby from accidentally falling out during the trip, and even if the bike itself falls, the correct child bike seat will soften the fall and help avoid injuries.

What you should pay attention to when choosing a chair for a child:

  • The seat for a child on a bicycle must be made of high-quality shock-resistant material;
  • The presence of a high back and armrests or handles;
  • Lateral protection of the hip joint;
  • Adjustable seat belts that will be difficult for your baby to unfasten on their own;
  • Soft inserts for a child seat;
  • Comfortable footrests with fixed legs;
  • An adjustable backrest is desirable to change the position of the body;
  • For the smallest, there should be a crossbar on the chair for which the child can hold on with his hands.

Choosing a child seat, do not forget about the simple rules of riding with it: always check the integrity of the fastening, do not load the child’s bicycle seat with additional weight, be sure to fasten the child with seat belts, and also put on a child’s helmet.

Types of children’s bike seats

The choice of this or that seat depends on the age of the child, the characteristics of the two-wheeled vehicle and personal preference. There are 2 types of child seats:

Up to the age of 3 years, the baby can ride even in the front or even in the back seat, but older children can only be transported in the back. The front seats have a much smaller size and, accordingly, the carrying capacity. It should also be borne in mind that the baby is growing and can obstruct your view. The back seat in this regard is much more comfortable, but it will not be so interesting to your baby because of the closed view in front. Of the minuses of the rear seat, it can also be noted that it will be difficult for a parent to watch his child or talk to him during the trip.

The choice of which mount to choose. handlebar, frame or seatpost. should be made based on the design of your two-wheeled vehicle as well. For example, a child bicycle seat cannot be attached to the frame if it is inclined or if brake and gearshift cables pass along it. The handlebar mount can be difficult to control and is more suitable for short bike rides than the trunk mount. However, it also has its drawbacks. it practically does not provide amortization. In this case, it is better to pay attention to models with built-in shock absorbers. The seat tube attachment is a lock with two steel tendrils extending from the seat. This seat is easy to install and remove on almost any bike, whether it has a rack or not. With sufficient distance to the trunk or rear wheel, this chair will provide excellent shock absorption.

Whichever child seat you choose, be sure to follow the installation instructions or contact a workshop. Remember that a secure, comfortable and safe child bike seat will ensure a fun cycling experience for toddlers and their parents.

Isofix

The most popular child restraint system for transportation in private vehicles. This option is designed to fix the seat to the body at the rear of the vehicle. Fastening is done using special carabiners. In the manufacture of the product, stainless steel is used. Direct connection with the body of the machine prevents rupture of structural elements and injury to the passenger. Also, the positive side of this option is the ease of use. For installation, you just need to push the chair into the grooves until it stops. This option is highly reliable.

The lack of necessary fastening elements in some cars can be highlighted as disadvantages. This means that such a chair can not be installed in every car.

Seat belts

The above methods of fixing the seats are sufficient to ensure the standard level of safety. However, in addition to them, other options may be used. Most often it is an anchor belt or support.

Features of the

Among the rich assortment of child seats for a car, it is quite difficult to find the “right”, suitable option. This is due to the fact that all existing product modifications have a number of features. It is these nuances and characteristics that differentiate the seats of various categories and manufacturers from each other. They also allow you to determine the degree of safety of the structure. Among the most important features of car child seats, the following points should be highlighted:

  • device type;
  • types of fastening;
  • existing installation versions;
  • additional options.

Of course, it is necessary to describe in as much detail as possible these characteristics of the device under discussion. After all, the choice, as well as the well-being, health and life of children and their parents, depends on the correct understanding of this issue. The above features are interconnected with each other. Among other things, they all flow from each other. So, the type of chair largely determines all other criteria.

READ  How to Choose a Bicycle Handlebar

The type of the described product is currently determined based on two main criteria: the age and body weight of the child. It is these aspects that influence the choice of the method of attachment and shape, design features of the seat. They also determine the principle of attachment to the car interior.

The modern industry has already managed to divide into categories all the current models of this car accessory. Sellers distinguish several main groups.

  • Category “0”. The smallest passengers are transported in these models. They allow you to ensure the maximum safety of the baby. The ability to transport the baby in a state of sleep is also important. These models are only used on the rear sofas. They are installed facing backwards.
  • Category “0”. Suitable for babies from one to one and a half years old. These models should carry small passengers weighing up to thirteen kilograms. The set of such systems may include additional fastening elements, special supports.
  • Category “1”. Helps when transporting children from one to four years old with a weight of nine to twenty kilograms. Products of this type can be installed facing in the direction of travel.
  • Categories “2” and “3”. Designed for travel by older children. Their body weight should be in the range from eighteen to thirty-five kilograms.
  • Booster. This category of products can be used when transporting over-aged children. The design of the seat allows the existing safety elements to lie down correctly. It also provides a sufficient degree of comfort and freedom for the child. The idea behind this option is to raise the child to a level where it will be possible to use a standard safety system.

The first two options are popularly called infant carriers. The name comes from the fact that these models provide a half-recumbent position of the body. The child is restrained with elastic straps and padded pads in a much more serious way than with alternative methods.

The rest of the variations are most often produced as transformers. In them, you can change the height of the back. It is also possible to make changes to other structural elements.

An excellent view for transporting children will be a universal model. This type of product has been used for many years of a child’s life, from early childhood to adulthood. The range of body weight in such models varies from nine to thirty-five kilograms. These versions are equipped with an extended system of regulation for the growth of the child. The choice of a particular chair model determines the degree of comfort and safety during the trip.

How to arrange?

You have already purchased a car and a child seat. Now it remains only to understand where the purchase should be installed in the vehicle. There are several options in this matter, but research and long-term experience leads to the results described below. Active users of the discussed car devices know that you should not put a child in the front passenger seat. However, the real arguments differ slightly from the generally accepted versions. The point is not at all that in this position a mass of fragments of the windshield will fly into the child. And not that the force of the blow will be excessive.

In fact, the airbag is to blame. She will save an adult passenger from certain death. The child can do much harm. If the desire to be with the baby is great, then you can simply refuse to use the airbag. In this case, you should rely on the sturdy body and special sides of the child seat. The most common variation is to position the structure at the rear of the car on the passenger sofa. Experts agree on the need to install the device in the seat of an average passenger. This will reduce the negative impact on the child during a blow to the side of the car.

It is also a good alternative to secure the chair to the second row of seats on the right. In this position, the risk of being hit by shrapnel is reduced to a minimum. Also, the child will always be supervised, it will be easier to watch him. In this case, you can increase the usable space: you just need to move the front passenger seat. The danger in this case is contained by a closely located door and structural parts of the car.

Safety regulations

The use of child seats is one of the rules for the safe operation of vehicles. The very first requirement is choosing the correct chair model. This rule assumes compliance with:

  • the age, body weight, height of the child;
  • car model.

Strict compliance with the current safety requirements will ensure comfort of movement, save lives and health of people, money and time.

How to fix?

Buying and properly attaching a child car seat is not a sufficient safety measure. It is also necessary to properly fasten the child to the structure. Manufacturers offer various methods of fixing, but there are generally accepted and most common, convenient variations.

  • Diagonal belt. Starts over the shoulder of a child. It may seem as if he is pressing too hard on the body. However, this is not the case, the inventors made sure that the children did not experience discomfort and were fully protected.
  • Belt. The tape is located on the top of the legs. The strap should grip the hips.
  • Combined fixation option. suitable for the smallest passengers. It allows you to fix your chest, back and legs. For this, a five-point mount is provided.
READ  The brakes on the bike are stuck what to do

In all these cases, it is important to remember that the design should not cause discomfort to the child. There should be a distance of two fingers between the child’s body and the straps. This will help avoid trauma and negative emotions.

Installation steps

From the above, it becomes clear that there are many types of seats. However, not everyone knows that each type has its own installation procedure. They should be talked about based on the above classification. When installing the infant carrier, follow these steps:

  • disable the airbag before installing the product on the front seat;
  • put the cradle with its back in the direction of travel;
  • transfer to a reclining position;
  • move the device away from the windshield;
  • check the reliability of all attachment points and the structure as a whole.

Bell Classic Child Carrier for bikes. This child bicycle seat is easy to use and fun. Fit most bikes

In the process of installing a full-fledged child seat in the rear of the car, the algorithm of actions will be slightly different:

  • first you should move the front seat;
  • after that you need to put the chair on the sofa;
  • now you can pull on the safety harnesses and tighten their straps tight;
  • at the end you need to check the correct position of the belts;
  • it is imperative to check the structure for stability.

When using a chair with the Isofix fastening system, the algorithm of actions also has a number of features:

  • the first step is to make sure that there are special mounts in the car;
  • then you need to choose the most suitable place for the child;
  • now you can fix the chair using special fasteners;
  • it may make sense to try to duplicate the fixation using simple belts to ensure the safety of passengers;
  • we must not forget about additional control of the reliability of the installed structure.

Nowadays, motorists often use the classic version of the fastening with fixation through the existing seat belts:

  • the belts are tight on the young traveler;
  • the owner of the car carefully checks the reliability of fixing the structure and the correctness of fastening the harnesses.

Special mention should be made of the combined installation methods. One of them is the fastening in a bundle: cable and Isofix, cable and supports. This option is considered reliable and meets the security requirements. However, it is not suitable for all motorists. Here, when installing the chair, the attached instructions or a specialist in this field will help.

How to change the toilet seat

Before you install the toilet seat in its rightful place, you must dismantle the old one. For these purposes, it is necessary to use keys of the appropriate size.

Older toilet seats are likely to have steel mountings, which will need to be unscrewed. Most often, two such mounts are used. they are located on the back of the toilet.

Removing an old seat is easy enough. After it is removed, you can start installing a new one. Before that, you first need to clean out the old bolt holes that are located on the toilet. Corrosion may well form in these places.

Only then can you directly install the new seat. This is done quite simply. The same tools are used for this purpose as for dismantling work.

Only in this case everything happens in reverse order. Do not overtighten the bolts when attaching them. This will put additional stress on both the toilet itself and the seat.

How to install a toilet seat?

The toilet seat breaks down quite often. In this case, the easiest way out of the situation is to replace it.

When you first need to dismantle the old seat, and only then start installing a new one. It is worth talking about these procedures more like.

How to fix the toilet seat

Many people face the problem of attaching a toilet seat. If earlier steel bolts and nuts were used for these purposes, now quite often the seats come complete with plastic versions of this fastening material.

So, today the following types of toilet seat mounts are used:

  • steel bolts and nuts;
  • hairpins;
  • plastic bolts and nuts.

If we talk about metal mounts, then they are quite simple to install. To do this, only a wrench of the appropriate size is needed from the tool.

In some cases, you can do with pliers. The bolt is inserted from above into the corresponding holes. It is necessary to fasten the nut from below. This is what the key is for. The disadvantage of such fasteners is that the steel parts are prone to corrosion.

READ  How to put a chain on a bicycle wheel

Nowadays, seats that have plastic connecting elements are increasingly appearing on the market. They are installed in the same way as steel.

However, this type of fastener has one undoubted advantage, which is that such connecting elements are not subject to corrosion.

Top 5 Best Child Bike Seats in 2020 Reviews

Removing the toilet seat

Always remove the old fixture before installing a new toilet seat. This problem is faced by every person who decided on a similar venture.

Removing an old toilet seat is not always easy. In some cases, you will have to use additional tools and materials.

Of course, if we are talking about new fasteners, that is, not yet rusty, then they can be easily unscrewed using keys of the appropriate size.

In the event that it is an old fastening, additional efforts may be required. In this case, the joint must be lubricated with a liquid lubricant.

Sometimes you can use a metal hacksaw or a grinder to remove the attachment. With their help, the head of the bolt is cut off, and then the mount is painlessly removed.

Features of the bike seat design:

Depending on the design, the chairs have:

There are also chairs in which:

-Adjustment of the angle of inclination with additional holes in the back of the chair and the height of the back.

Front location:

Rules for choosing a chair for a child

The child should be comfortable in the seat without leaving too much free space. This negatively affects the control of the bike, because the baby will fidget. Footboards are a significant plus to the design: they are both comfortable and safe at the same time.

attach, child, seat, bicycle

Pay attention to the safety elements: a retaining belt and a front bumper. The latter is important for the rear seats. When braking, both the belt and the bumper will restrain the inertial movement of the child’s body.

Depreciation. Everything is in order for the armchairs with attachment to the pipe. the type of installation itself already implies that when moving along irregularities, the child’s seat will vibrate and damp shocks. As for the front and “luggage” seats, it is better to look for a model with shock absorbers or then install them yourself. However, for walks with a child on smooth roads and sidewalks, they will not be needed.

Convenience of fastening. It is unlikely that you will have to constantly carry your child with you, and it is ugly to ride with an empty chair. That is why it should be conveniently mounted on the block and removed from it.

Some models allow tilt adjustment. True, the angle of movement of the seat is small, and rightly so: if you move the child seat too far back, the footpegs will move right under the cyclist’s saddle, and the child will have nothing to lean on. A small move is not considered a disadvantage, although they may object, they say, the child will not be able to take a nap. Still, chairs are needed to transport children as needed, to open up a new world for them on a ride and introduce them to a bicycle. But not for sleep.

SPORTFIX is a special mount that is suitable for sports and city bikes, the upper and lower tubes of which are connected together, leaving almost no gap. Even if it is completely absent with the help of special arcs that come with the mount, you can adjust the installation to the geometry of your frame.

The seat is fixed on the head tube, which allows the little cyclist to get the maximum view, and his parent, to keep his child under supervision. Safety is ensured by a three-point harness, which allows you to securely fix the child, both in height and in width. The footrests, also with a belt, are height adjustable.

1.Type “Protection of the hip joint

Chairs of this level are distinguished by a shallow seat and a backrest ending higher than the child’s back. And also often with sliding footrests. The legs and torso are secured with elastic clips and a belt. It will not work for a long time to ride in such a seat, in the end it all comes down to the perseverance of the child. Unprotected hands and feet may be injured if dropped.

Attaching a child seat to a bicycle

Baby chair Hamax Caress C2 W / Lockable Bracket

The Hamax Caress C2 W / Lockable Bracket is designed for children over 9 months of age and weighing up to 22 kg. Technical features: backrest tilt adjustment, height adjustment, 3-point seat belts, adjustable footrests, integrated reflectors.

TYPES OF CHILD BIKE FIXINGS

Front mounts are of different types: These seats are designed for the smallest riders, weighing up to 15 kg.