If, for one reason or another, you started teaching your child to ride a bike relatively late. after 3-5 years, his first bike can be a two-wheeled one with side wheels. However, in this case, the baby will have more difficulty, because it is not an easy task to immediately learn how to pedal, keep balance, and steer. Therefore, it is still better to start with a tricycle or a balance bike.
Buy a four-wheeled bike
What bicycles for the little ones are
The most popular and safest bike for a child 1.5-3 years old, of course, is a tricycle. It is stable enough not to let the baby hurt and fall, allows you to learn to coordinate movements, steer and pedal, develops motor skills and trains leg muscles. When choosing a tricycle, it is important to pay attention to the seat height and make sure that your toddler can easily reach the pedals. It is recommended to give preference to light and safe models made of plastic or aluminum. A pleasant addition will be decorative baskets, levers, toys that will interest the child, so that he himself wants to ride a bike.
Many manufacturers offer tricycles today. They can differ quite significantly from each other in terms of design features and are of the following types:
For the first time we put a child on a bicycle
A bicycle is a cherished dream and one of the best gifts for any child. Remember how pleasant it was to race around the yard on a two-wheeled horse, what queues were lined up from those who wanted to ride, and with what sadness in their eyes the children who had not mastered this sport stood aside. Every parent should give a child the opportunity to get real pleasure from driving, and the sooner the child sits on the pedals, the easier it will be for him, the healthier he will grow up. Therefore, special attention should be paid to the choice of the first bike and the correct training in the basics of riding.
The first bike is recommended for children at the age of 1.5-3 years. Some parents and doctors are sure that kids are able to master a balance bike or a tricycle even before they learn to walk well. But in each case, it is better to proceed from the growth, physical activity and desires of the child. It is important to put the kid on the right bike, interest him and educate him competently, but in no case force him. Riding should bring joy to the child. this is the main rule of successful mastering of an iron (however, at first, rather, a plastic one) horse. We will share the rest of the tips with you in this article.
Tricycle with parent handle (or bike stroller)
This option guarantees complete safety of the baby, suitable for long walks with one and a half year old children and older children. The parental handle allows you to use the bike as a stroller when the child is tired and does not want to pedal anymore. If the model is equipped with a footrest and a chair-shaped seat, the baby can even sleep after the first lessons of the basics of riding.
Handles are attached to bicycles with saddles so that parents can control the baby’s vehicle, blocking the steering wheel and preventing the young athlete from going, for example, onto the road. If desired, these handles can be easily removed.
Buy a tricycle with a handle
How to choose the first bike for a child
Regardless of what type of bike you buy for your child, there are a number of nuances to consider when choosing. Firstly, a particular bike must correspond to the growth and constitution of the baby, otherwise there is a great risk of injury. A bicycle is considered suitable if its frame is at least 10 centimeters from the child’s crotch when the child is standing. Only in this case he will be able to jump from his vehicle in a dangerous situation without unnecessary problems and not hurt himself.
Secondly, you need to take into account that children grow up very quickly. Accordingly, the ideal bike for a child should be easy to adjust. This refers to both the seat and the steering wheel and other parts of the structure. When adjusting the saddle height, you need to make sure that the baby can easily reach the pedal located below, and the leg is almost straight. The steering wheel should be fixed at chest level so that the baby does not hunch over or bump his knees against it while driving.
Thirdly, you need to pay attention to the steering wheel. It must have a special limiter that prevents it from rotating along its axis. Otherwise, the child may receive a dangerous blow to the stomach by inadvertently twisting the steering wheel. At the same time, the handlebars should turn quite easily so that the kid can independently control the bike.
Unboxing and Assembling my new two-wheeled toy
Fourth, the first bike for kids should be light enough. A tiny toddler simply cannot move a heavy structure, and if he can, control will be very problematic. And it will be much easier for parents to transfer such bicycles from place to place. Therefore, the first children’s bike must be plastic or aluminum, weigh no more than 10 kilograms.
Fifth, choose the right wheels. It is preferable to stay with rubber tires, rather than plastic. Rubber absorbs better, makes the bike more manageable, and increases its cross-country ability. In terms of diameter, the ideal tricycle is a large front wheel and two smaller rear ones. The difference in diameters makes the structure more maneuverable, allows you to develop good speed.
Sixth, think about safety. On any children‘s bike, the chain must be covered with a special protective cover, the pedals must be wide enough and comfortable, the leg must not slide off them. If you are buying a tricycle with a chair-shaped seat and a parent handle, it is worth considering harnesses and a removable footrest for resting your child.
How to assemble a children’s bike
Having received the coveted box with the vehicle, each of us will be surprised to note that it is much shorter, thicker than the bike itself. For the convenience of shipment, the wheels, saddle, steering wheel, most often, a chain drive with pedals are removed. So a two-wheeled bicycle for children not only takes up less space, but also runs less risk of damage during shipment. After opening the box, you first need to make sure that all the parts are in place. This can be done by checking its contents with the inventory, which is in the vehicle’s passport. Most often, all large units, parts are in place, but small fasteners, various bolts, nuts, sometimes you have to buy in addition, if the seller has not taken care of their careful packaging.
If the tools are not included in the kit, then you need to prepare:
- open-end wrenches 8-17 mm;
- end wrenches 8-17 mm;
- a hammer;
- adjustable wrench.
Putting together the correct children‘s two-wheeled bike
All bicycles for children, as well as most adults, are assembled in one sequence. The front wheel is installed first. For installation, you only need a wrench, 5-10 minutes of time. Do not apply the front brake immediately. the entire body kit can be installed last when the vehicle is fully assembled. After installing the front wheel, you need to tackle the chain drive, the rear wheel. It is much easier to assemble the entire drive at the same time. install the pedals, fix the chain on the drive and driven sprockets, only then fix the rear wheel.
With the wheels in place, it’s time to get on the steering wheel. The steering wheel is always very responsible, so you need to fix it as securely as possible. To secure the steering wheel to the frame stem, you will have to use not only a 12-13 key, but also pliers, even a hammer. Having secured all the details, we check the steering assembly. there should be no backlash. Following the steering wheel, we fix the saddle, setting it according to the child’s height. Last but not least, two-wheeled bicycles for children and teenagers are supplied with brakes, fenders, a trunk, and other elements. Don’t forget about safety. If the kit comes with a chain guard, then it is better to install it. Then the child will be insured against falling clothes between the chain and the leading sprocket.
When working with keys, do not forget that children’s two-wheeled bicycles, as a rule, are somewhat softer than adults. Therefore, when tightening the nuts / bolts, it is not recommended to apply great force to avoid stripping the threads. Remember to lubricate all moving parts during assembly. You can not regret the lubricant, because the excess can always be removed later. After the vehicle is fully assembled, check all moving parts, components, and brakes.
How to assemble a kids tricycle
Trike Power Neon bike model. Green colour.
The attached instructions are sparse. At the first assembly, it may cause some difficulties. Therefore, I want to share my experience in assembly. Below are photos and explanations for each step.
From the tools, open-end wrenches or sockets for 10, 13 and 17 are required. Hexagon, it is included in the kit.
For convenience, I laid out all the parts from the box on the floor.
The young assistant has already become interested and joined the process 🙂
The assembly starts with the plug. You need to insert a shiny wing into it and fix it with a screw. For orientation: the eyelet with a hole and a plastic cover should be on the left.
The front and back wings have different lengths. Short side to be installed in front, long in back.
Move the plastic cover and iron bushings to the center.
Insert the plug into the bushings and tighten with screws.
The right pedal is marked with an “R”. Thus, it should look like this: an eyelet with a hole for traction on the right, a short part of the wing in front, a pedal with the letter “R” on the right.
Moving on to the back. We take the rear wheels and iron rails.
You need to put plastic gears on the wheels. Thanks to them, the bike will have brakes. In this case, the nipples must be outward.
We find in the kit such black bushings with red pedals. This is also part of the braking system.
We dress them from the outside until it stops. First you need to remove the plugs from the pipes.
We put the wheel on the frame using the guides.
We tighten the guides with a hexagon. It is not necessary to the stop, but so that the wheel can rotate freely.
Unboxing And Test Drive my new two-wheeled toy
This is what the rear axle looks like when assembled.
Remove the small plug from the eyelet on the frame. Remove the side caps from the footboard by unscrewing the central screw.
We insert the footrest into the eyelet. You also need to insert a metal pin for the intermediate fixings of the footrest. We put on the side caps and screw in the central screw.
Moving on to installing the roof rails. It is attached to the frame with three bolts.
Insert the guide for the control knob from below. For orientation: it has an eyelet for traction. When installed, it should be on the right. The guide simply snaps onto the two clips.
A slingshot for the handle is inserted into the guide. Locked by a lever.
Finally, we set up the parent handle. Fixed with two clips. Two positions are possible. short and long position.
We install the chair. Mounted with two bolts.
Install the steering wheel. The tightening bolt must be on the side of the notch or the handlebars will not tighten. The photo is not correct, the latch must be turned 180.
Here is the assembled trunk.
On the right side we fasten the control rod. One end to the fork, the other to the rail.
The length of the pull can be changed. This is to align the front wheel and parent handle with each other.
Installing the roof. Insert the feet into the guide rail and tighten the bolts, one on each side. We also install the front support arches.
Review: Children’s bike Stels Jet 14. Great bike for kids 3.5 years old!
The bike is delivered unassembled in a box. The child could not wait for dad to come home from work to quickly assemble the bike and go for a ride.
The bike is packed very neatly: the frame and some other elements are wrapped in thick wrapping paper, all bolts are also packed in separate bags.
Let’s start assembling. As expected, assembly instructions are included with the bike in the box.
They uncoiled everything, unrolled and now the most important thing. put it all together.
The only drawback was that along with this, there was not a single key to build. Fortunately, they were at home. But my husband was indignant.
The bike is equipped with two brake systems: rear and manual. Handbrake for the beginner cyclist, located on the right handlebar. exactly what is needed! Also, the handbrake is designed for an emergency stop. The handle is made of a pleasant and non-slip material.
On the left side of the steering wheel there is a bell-signal with a pleasant sound. The handles on the bike are rubberized (with the logo of the company applied) to prevent small palms from slipping.
The metal bar on the steering wheel is covered with a soft nozzle so that the child is not so traumatic in case of something.
The bike chain is covered with a special pad.
This is what 14-inch wheels look like.
What could be better than cycling? But everyone knows that cyclists remain less visible to motorists. This is why reflectors for bicycles were invented. It is clear that a child will not go skating alone, but it is still better to instill good habits from childhood. There are reflectors on the pedals as well as on the wheel spokes.
5-Step Assembly. How to Assemble a Huffy 12″ or 16″ Kids Bike with Training Wheels
A special pad is attached to the frame so that the child does not hit in the event of a fall. Also, almost all elements of the bike have a corporate logo.
The steering wheel and seat can be adjusted in height and separately the steering wheel can be tilted forward and backward. The seat is covered with artificial leather and is quite comfortable according to the child.
This is what a fully assembled bike looks like.
Additional safety wheels are designed to help your little one ride the two-wheeled bike safely during the initial period of the ride to avoid injury from falls. They help the child learn to maintain balance and even when cornering. over, at first, because of fear, the child always looks down, and not at the road ahead. In the future, the wheels are removed and the child rolls on his own like an adult.
And here is the bike itself in use.
Personally, I am happy with the purchase, and the child is even more. Even though he still skates for short distances, every day there are more and more successes. As stated by the manufacturer. all parts of the bike have been tested for safety. I can safely recommend a child’s bike for purchase to children aged 3.5 years.
Choosing a children’s two-wheeled bike
To make learning to ride a bike as safe and enjoyable as possible for a child, you should pay special attention to choosing the right model. The bike should not be too big or too small. It is important that the baby can freely rest his feet on the ground, feel confident, because the height of the frame and the diameter of the wheels (usually 12-16 inches) are selected taking into account the height of your child.
The seat must be comfortable and correctly adjusted. If the child reaches the pedals perfectly, but on the lower pedal the leg stretches and almost straightens, it will be comfortable for him to ride. Ideally, there should be a limiter on the steering wheel to prevent it from twisting and, accordingly, the baby’s fall. The correct steering wheel reaches the baby’s chest, and does not stand at an angle of 90 degrees, so as not to injure the stomach in case of a fall. Another important criterion for the safety of the baby is the chain guard.
We transplant a child from three wheels to two
The ability to ride a bike is an extremely useful skill in helping to maintain excellent physical shape, coordination, endurance and a sense of balance. And the sooner a person sits on a two-wheeled horse, the better, because in childhood many things are much easier to learn than at an older age. Therefore, every parent should try to help their child master the art of cycling.
The best way to start the learning process is to ride on three wheels. Such bicycles are bought for babies starting from one and a half to two years. Three-wheeled vehicles teach children to pedal, steer, turn, feel confident. If the baby has sufficiently mastered the listed skills, his coordination and leg muscles are sufficiently developed, it is time to change to two wheels. This usually occurs at the age of 5-6 years, but sometimes a little earlier (at 4 years old) or later. How to properly transplant a child from three wheels to two? We will talk about this in detail in this article.
Learning with additional wheels
Most often, two-wheeled bicycles for the smallest are equipped with suspension wheels that prevent falling if the child does not maintain balance and falls on its side. This training option is considered safe, but at the same time, longer. It is suitable for riding on flat asphalt roads without many pits and potholes.
Before putting a child on a new two-wheeled bike, you need to explain its differences from a tricycle. tell that you have to keep balance, you cannot brake and turn sharply, since in the new vehicle the center of gravity is lower and you can overturn it.
It is also important that the side casters are correctly installed. In no case should they be on the same level with the rear wheel or touch the ground at the same time, otherwise the large wheel will spin even due to the slightest unevenness on the road. The ideal option for the first time is a slight tilt both to the right and to the left, so that the child can correct his mistakes and straighten the bike himself. Trying to maintain balance, the baby can alternately lean on the right and left side wheels, mastering the riding technique.
Over time, the child will begin to skate better and better. Then you can gradually raise the side wheels without informing the young athlete. After a few treatments, you will notice that the training wheels are no longer touching the ground. So it’s time to take them off. the child has already learned to ride a two-wheeled bicycle and keep balance.
Immediately on two wheels
It is more efficient and quick, but at the same time laborious for parents, to put the child on a two-wheeled bicycle without side wheels right away. This method of training involves the help and constant supervision of adults so that the baby does not fall, losing balance. It is best to hold your child by the shoulders and run to the side or back of the bike. You can also correct the tilt by supporting the saddle or rack. But in no case should you hold the handlebars of the bicycle. This will only prevent the child from learning to balance with his help and feel the balance. And it is always more interesting and pleasant to choose the direction of travel on your own.
To learn how to ride a two-wheeled bicycle, you need to find a clearing or an open area, because a child is unlikely to want to ride only in a straight line, and for smooth turns at first you need more space. You should not rush your baby, scold for failure, or force him to learn. The main thing is that the child himself would like and love to ride. Then the training will be quick and easy.
So, in order to transfer a child from three wheels to two, you need to choose the right bike and the appropriate teaching method, show maximum attention and patience. Then very soon your happy baby will confidently ride with you for walks, have a lot of fun, strengthen muscles and health.