Do-it-yourself waterproofing of the kugoo m4 electric scooter

Kugoo m4 pro 13,5Ah NEW 2020. Like the younger version in 11Ah, the same popular, but already with an updated 2020 design, which has been significantly improved. Supplied in versions 13,5,17,18Ah. Best in the 10 ” city electric scooter segment for its price.

Box dimensions 1192849 cm
Deck length 57 cm
Deck width 19 cm
Deck working surface 47 cm
Deck to handlebar height 94 cm
Width of the unfolded handlebars 60 cm
Width of handlebars folded 22 cm
Length of the scooter when folded 114 cm

Electric scooter Kugoo M4 Pro 13,5Ah Jilong NEW received an update in 2020.

Kugoo M4 Pro 13,5Ah Jilong NEW 2020 has everything a user needs for comfortable use and safe driving, suitable for both city and rough terrain. Classic appearance yet stylish.

To begin with, this is a foldable electric scooter. For maximum compactness, fold down the handlebars, set the height of the handlebars to minimum, fold down the seat (if attached), and push the steering rack against the deck. When folded, the scooter can be taken with you on public transport, brought into buildings, stored at home.

The steering rack of the Kuga M4 Pro New is telescopic, that is, the height of the steering wheel can be adjusted, adjusting for convenience to the height of the rider. There is a display on the right handlebar to keep track of all the information you need while driving. On the left side of the steering wheel there are buttons for the sound signal and turning on the backlight and turn signals.

An electric scooter needs lighting to ride safely at any time of the day. The Kugoo M4 13.5Ah Jilong NEW has a headlamp in front to illuminate the road, a parking light in the rear. to notify drivers behind the scooter on the road, there are also turn signals indicating the intention to turn, in addition, LED strips are attached to the sides of the deck, which are not only make the scooter look more attractive, but also serve as an additional identification signal.

You can attach a seat to the Kugoo M4 electric scooter for even more comfort, especially on long journeys. The seat is soft, with shock absorbers, adjustable in height. SEAT COMES INCLUDED.

The suspension of this model allows you to ride on uneven roads without feeling too shaky. This is all thanks to front spring and rear air shock absorbers that absorb vibration. Well, big wheels with a diameter of 10 inches, which form a high ground clearance, help to overcome obstacles.

Kugoo Kirin M4 Electric Scooter: For City and Off-road Terrains and 45km/h Top Speed!

To leave it in an upright position without leaning on anything, you can use the special parking step.

The deck is wide, so you can comfortably place both feet on it. It is also covered with strips of emery material to keep your feet from slipping.

A speed of 45 km / h and a mileage of up to 40 km is enough to enjoy the trip and be always and everywhere on time.

  • Electric scooter
  • Charger
  • Instructions
  • Instruments
  • Keys

Kugoo M4 Manual RGB Mod

To buy an electric scooter Kugoo M4 Pro Jilong 13,5Ah Jilong NEW in St. Petersburg means to acquire a convenient, compact and practical transport for everyday use, which will help in getting around on business and simply give pleasant impressions from walking trips.

Electric scooter batteries 36v

Any modern vehicle that consumes electrical energy will sooner or later require a change of battery cells. The approximate service life for 36v batteries for an electric scooter is 2-3 years, depending on operating conditions, timely care and maintenance, characteristics of the vehicle. It is proposed to consider what the replacement equipment is, how relevant its application will become.

What to look for

The 36v 12ah battery for the electric scooter must be properly operated. The issue of charging is given top priority given the requirements set by the manufacturer. With a full charge of the replaceable element, the voltage level will reach 42 Volts. This figure is equivalent to three helium or lead-acid batteries that are charged in the same way. If you charge using a “native” device for this, the process will stretch in time, which may be due to a discrepancy in the charge current supplied to the battery. In the proposed version, the kit provides for the supply of a charger that supplies a charging current in the range of 0.2-0.25C. With this operation, the battery will be fully charged after 4 hours. The lithium battery is not only lightweight, but also charges faster.

Torque On My Kugoo M4 Pro Electric Scooter With A Better Ebike Controller

Benefits

When purchasing a battery, you need to consider its benefits. Low weight will make it easy to transport it, reduce the overall mass of the electric scooter. Additionally, the company can purchase a powerful charger focused on quick charging of lithium batteries. The cost is insignificant, but you can reduce the charging time of the device, guarantee the convenience and practicality of its operation.

The advantages include the quality of elaboration of individual elements. The battery will confidently serve its term, will help to guarantee reliability. At a critical moment, the device will not let you down, even if it is a cold time of the day. Special attention should be paid to the ability to charge the device by placing it separately from the scooter beforehand. At the same time, the user saves space, time for setting up a vehicle near charging points.

Characteristics

The nominal voltage is set at 36 Volts;

The limit voltage of the replaceable element is 42 Volts;

Continuous discharge current is 12 amperes.

The 36 Volt battery for an electric scooter provides for the use of a frame made of durable plastic with the use of holders (grilles with additional fasteners). The elements are securely installed in the structure of the electric scooter, it will not be shaken during operation, it will withstand the load even when the temperature outside drops. The connecting bars are designed with an emphasis on operational reliability. They will not tear even with prolonged use.

READ  How to replace the bearing on the handlebar of a child's scooter

Electric scooter waterproofing

do-it-yourself, waterproofing, kugoo, electric, scooter

What is waterproofing and why is it needed. Many people have this question, after all, this procedure is not free, as a result of this, questions arise, why is it, what it protects from and what is done for the money. which you paid Let’s figure it out

Waterproofing wheel motor

Even if you operate your vehicle only in dry weather, you still cannot avoid temperature drops as a result of which condensation appears (heating the engine from motion and cooling it down to low temperatures, and then heating up again). When the engine is protected, it will save you many problems in the future.

The service includes: Disassembly, diagnostics, coating with a special hydrophobic compound, lubrication of joints with a sealing compound, assembly.

Electric scooter waterproofing procedure

If you plan to use your electric vehicle not only in dry sunny weather, then this topic will be very relevant to you.

  • We open your engines and look at their condition, if everything is in order with them, then we prepare them, degrease and cover them with a special varnish, which will prevent the appearance of corrosion as a result of condensation, or other ingress of moisture. If the condition is not suitable for coating with a special agent, then we prepare your engines for this procedure.
  • The next step in waterproofing is covering your controllers with the same composition.
  • The battery is the heart! We also cover it with a special composition, now it is not afraid of moisture in moderate amounts and condensation.
  • Every bolt that can be removed by vibration. as a result of operation, we unscrew, degrease and tighten back with a certain effort with a special torque wrench.
  • We do not touch the gas trigger, as it is sealed enough for 95 percent of electric scooters.

Deck waterproofing

Let’s figure out what a “deck” is. The deck is the very “step”, the platform on which you will stand while driving. Between the deck and the enclosures where all the electronics are stored, there are gaps that should be “closed” so that water does not leak there. Even expensive electric scooters are not protected from moisture ingress into the body. In order to protect your scooter from the undesirable consequences of moisture and condensation, it is necessary to cover the wiring, controller and battery with a special hydrophobic compound. Also seal the joints and additional holes with a waterproofing compound.

The service includes: Disassembly, diagnostics, coating of wiring, controller, batteries with a special hydrophobic compound, lubrication of seams and inlets with a sealing compound, assembly.

IMPORTANT: Do’s and Don’ts!

After completing all the procedures, your electric transport is not afraid of:

  • puddles below the level of the motor wheel bearings
  • small rain
  • condensation due to temperature drop
  • moderate splashes and drops on the scooter deck as a result of operation in a rainy season.
  • Wash waterproof electric vehicles using pressure washers
  • Drive through puddles above the center of the wheel axis
  • Submerge in bodies of water above the level of the charge ports
  • Leave it in the rain outside

Do-it-yourself waterproofing of the kugoo m4 electric scooter

This is alias block. Please set block ID

Moscow, m. Kozhukhovskaya, st. Ugreshskaya, 2s60 (access system: passport and vehicle registration) Service center 8 (499) 455-04-96PN-SB: from 10.00 to 19.00

Electrosmart provides services to protect electric scooters from water and moisture. With the help of special compounds, all electronics are processed, which create a special barrier that provides aqua protection. With it, your device will not be afraid of any rain!

Waterproofing an electric scooter is a set of works in order to protect your device from moisture ingress on bare wires, a wheel motor board, a battery and other electrical elements. The protective layer is durable and is not damaged in contact with water.

Aqua protection of your device will significantly increase its durability. Due to the waterproofing, the device will not be affected by moisture, which activates corrosive processes.

Our experts will be happy to answer all your questions, make competent advice and repair!

Electric scooter waterproofing is the most popular tuning today, it is used by both very young riders and adults. If you are a fan of extreme driving in adverse weather conditions, but do not want rain to damage your vehicle.

How to make high-quality aqua protection of an electric scooter? First you need to decide whether you yourself will waterproof your device or contact the official service for help. We recommend that you contact only professionals, since you CANNOT save on Safety and health of your loved ones!

Waterproofing is a complex procedure. in order to proceed with the implementation of moisture protection, it is necessary to remove the entire casing from the unit. Then all structural elements are disconnected from each other, the battery is placed in a separate sealed case for greater protection. All other parts of the electronics are treated with a special nano-coating (varnish) that is resistant to moisture and dust. The next step is to take care of the electric motors of the scooter, they must be disassembled and also lubricated with sealant. After that, it is necessary to collect all the parts, then the wires are seated in a heat-insulating tube, the seams are sealed. The battery is additionally covered with a film and sealed to prevent moisture ingress.

Electric scooter controller / board repair

The purchase of modern electric scooters solves the age-old problems of traffic jams, and also provides many opportunities for interesting and active leisure. At the same time, additional troubles may be associated with the purchase of such a transport, because it is necessary to protect your “horse” from possible breakdowns, and, if necessary, to provide fast and qualified “treatment”. The specialists of our service center will help to eliminate possible malfunctions in the operation of electric scooters of various models.

READ  How to put the front wheel on a speed bike

Symptoms of a scooter board malfunction

As for the main control point. the board or the controller of the electric scooter, a breakdown can occur not only with careless handling, but also due to the closure of the contacts when moisture gets inside the case. The best prevention of this will be the preliminary installation of water protection, the service of which is also performed by our specialists. In order to recognize problems in the operation of the board in time, you should pay attention to the following “symptoms”.

Signs of controller malfunction:

  • Problems when turning on / off the device.
  • Display error on display, beep.
  • Difficulty driving, turning and braking.
  • The device does not work correctly (only one wheel, brakes fail and the other).

Our specialists will help to eliminate possible malfunctions in the operation of the main or auxiliary board of the device, as well as to repair or replace the controller. We offer a full range of services: from diagnostics to eliminating the cause of malfunctions in your electric scooter. By contacting us, you will be able to assess the level of professionalism of our craftsmen, the quick terms of repairs, as well as affordable for repair and replacement of components.

Why does the electric scooter fail??

The reasons for the breakdowns of this type of transport can be roughly classified into two types of threatening factors. First of all, we are talking about a factory marriage, so it is preferable to initially choose transport only from trusted and reliable suppliers. The second danger is misuse. Insufficient or irregular charging, extreme off-road trips, water competitions in puddles and mud, as well as falls, collisions with curbs and other obstacles. this is just an incomplete list of troubles our technicians face when fixing a device.

Electric scooter repair prices

  • Diagnostics. when repairing with us, diagnostics are free;
  • Repair of the board from 1300 rubles;
  • Replacing the controller from 1000 rubles;
  • Adjustment from 500 rubles;
  • Full broaching of parts from 300 rubles;
  • Replacing the soldering of the battery from 400 rubles;
  • Replacing the throttle handle from 200 rubles;
  • Replacing the speedometer from 1000 rubles;
  • Replacing the brake handle from 200 rubles;
  • Replacing the brake caliper from 300 rubles per piece;
  • Replacement of the case from 1000 rubles;
  • Replacement of footrests from 100 rubles;
  • Replacing the shock absorber from 150 rubles;
  • Replacement of wings from 1000 rubles;
  • Bleeding the hydraulic brake from 500 rubles per brake;
  • Controller repair from 1000 rubles;
  • Replacing the ignition lock from 200 rubles;
  • Replacing the chain from 500 rubles;
  • Replacing an asterisk from 300 rubles;
  • Replacing the brake disc from 300 rubles;
  • Replacement of bearings from 200 rubles;
  • Replacing the camera and installing a new tire from 900 rubles;
  • Repair of the folding mechanism (or replacement with a new one) from 1000 rubles;
  • Repair of a motor-wheel (or replacement with a new one) from 1000 rubles;
  • restoration or replacement of the battery from 900 rubles;
  • Solving problems with control electronic boards from 900 rubles;
  • Aqua protection of an electric scooter from 2500 rubles;
  • Soldering contacts, connections or connectors from 800 rubles;
  • restoration of mechanical damages / argon welding from 1000 rubles;
  • Replacement of Hall sensors from 1000 rubles;
  • Repair of the charger from 900 rubles;
  • Battery recovery from 900 rubles;
  • Steering column prevention (flushing, lubricating, adjusting) or replacing 1,500 rubles;
  • Replacing the star 500 rubles;
  • Replacing the engine 1300 rubles;
  • Replacing the charger socket 600 rubles;
  • Replacing the controller adaptation 1200 rubles;
  • Headlight repair from 800 rubles;
  • Replacing bulbs from 300 rubles;
  • Replacement of sensors from 1000 rubles;
  • Replacing the controller from 2500 rubles;
  • Re-flashing an electric scooter from 1500 rubles;
  • Replacement of buttons from 500 rubles;
  • Hull repair from 1000 rubles;
  • Repair of the power connector from 1300 rubles;
  • Repair of a motor-wheel from 1000 rubles;
  • Repair of the power supply chain from 2500 rubles;
  • Repair of the charge circuit from 2500 rubles.

Thank you for contacting us! A manager will contact you shortly.

for waterproofing electric scooters

It consists of many points: the model of the electric scooter, the requirements for moisture resistance (whether you will ride in the winter, through puddles, etc.) and the cost of the sealant. You can find out the exact price from our consultants by phone. Below is an extended price list with our services:

  • Diagnostics. when repairing with us, diagnostics are free;
  • Adjustment from 500 rubles;
  • Full broaching of parts from 300 rubles;
  • Replacing the soldering of the battery from 400 rubles;
  • Replacing the controller from 1000 rubles;
  • Replacing the throttle handle from 200 rubles;
  • Replacing the speedometer from 1000 rubles;
  • Replacing the brake handle from 200 rubles;
  • Replacing the brake caliper from 300 rubles per piece;
  • Replacement of the case from 1000 rubles;
  • Replacement of footrests from 100 rubles;
  • Replacing the shock absorber from 150 rubles;
  • Replacement of wings from 1000 rubles;
  • Bleeding the hydraulic brake from 500 rubles per brake;
  • Controller repair from 1000 rubles;
  • Replacing the ignition lock from 200 rubles;
  • Replacing the chain from 500 rubles;
  • Replacing an asterisk from 300 rubles;
  • Replacing the brake disc from 300 rubles;
  • Replacement of bearings from 200 rubles;
  • Replacing the camera and installing a new tire from 900 rubles;
  • Repair of the folding mechanism (or replacement with a new one) from 1000 rubles;
  • Repair of a motor-wheel (or replacement with a new one) from 1000 rubles;
  • restoration or replacement of the battery from 900 rubles;
  • Solving problems with control electronic boards from 900 rubles;
  • Aqua protection of an electric scooter from 2500 rubles;
  • Soldering contacts, connections or connectors from 800 rubles;
  • restoration of mechanical damages / argon welding from 1000 rubles;
  • Replacement of Hall sensors from 1000 rubles;
  • Repair of the charger from 900 rubles;
  • Battery recovery from 900 rubles;
  • Steering column prevention (flushing, lubricating, adjusting) or replacing 1,500 rubles;
  • Replacing the star 500 rubles;
  • Replacing the engine 1300 rubles;
  • Replacing the charger socket 600 rubles;
  • Replacing the controller adaptation 1200 rubles;
  • Headlight repair from 800 rubles;
  • Replacing bulbs from 300 rubles;
  • Replacement of sensors from 1000 rubles;
  • Replacing the controller from 2500 rubles;
  • Re-flashing an electric scooter from 1500 rubles;
  • Replacement of buttons from 500 rubles;
  • Hull repair from 1000 rubles;
  • Repair of the power connector from 1300 rubles;
  • Repair of a motor-wheel from 1000 rubles;
  • Repair of the board from 1300 rubles;
  • Repair of the power supply chain from 2500 rubles;
  • Repair of the charge circuit from 2500 rubles.
READ  What is the Speed ​​of an Electric Scooter

Electric scooter waterproofing service

The electric scooter, for all its apparent simplicity, has electronic filling, batteries, parts and assemblies that require reliable protection against water ingress.

Waterproofing stages

Leave a request on the website, by phone 8 (495) 106-23-23 or via e-mail info@remont-elektrosamokatov.com

Diagnostics of an electric scooter, determination of the exact cost of repairs, availability of spare parts. Coordination of and terms with the client.

Directly repairing the product.

Notification of readiness and delivery of a repaired device. Our courier can bring the product to your home.

Types of sealing and its features

  • application of moisture-proof coatings;
  • installation of rubber gaskets.

The motor-wheel is the element most often in contact with water, while being maximally mobile. Therefore, its moisture protection is carried out by impregnating the windings with varnish. The wire entry holes are equipped with rubber caps, but when waterproofing your device in an official electric vehicle repair shop, these cable channels are sealed with silicone.

A layer of silicone is poured under the cover covering the battery cavity or a thin rubber gasket is cut out. It is important to emphasize here that the batteries are not rigidly fixed in the cavity, and during aqua-protective measures, the battery must be secured, its additional thermal insulation must be performed. The boards are filled with various types of varnish or a two-component epoxy resin composition with minimal shrinkage when drying.

When waterproofing lighting devices, the junction of the body and the lens, the exit of the wires from the body, are sealed. The connections of the parts of the body of the on-board computer, the places where the wires exit and around the perimeter of the screen are insulated. Other attachments require waterproofing where the wires are routed and where the wires to the battery come in.

Such tuning is carried out in specialized service centers. This is a fairly popular service, which is used not only by young fans of extreme driving in the rain, but also by adult owners of electric scooters.

Main assemblies and parts requiring protection from moisture

Waterproofing of an electric scooter is a set of works aimed at preventing moisture from entering the wiring, battery, motor-wheel board, and other components. Tightness is required:

  • at the joints of plastic elements, steel components;
  • in decks where electronic circuits and boards are located;
  • at the inputs of electrical wires to the body parts;
  • for attachments, lighting devices, computers;
  • in the cavity where the battery is located.

Waterproofing is a rather laborious work, in which all the casing is removed from the unit, the structural elements are detached from each other. Electronic parts are coated with a special varnish that is resistant to moisture and dust.

Water getting inside the scooter body will not cause direct harm, but moisture will provoke the onset of the oxidation process of metal parts. Therefore, not only waterproofing the wiring, protecting the board or battery is important, but also sealing the case is also necessary. The joints of individual parts are sealed with a layer of silicone.

Reasons for mandatory waterproofing

Aqua protection is necessary to prevent:

  • short circuit;
  • oxidative processes that destroy electronics;
  • corrosion of steel parts in inaccessible places.

In addition, the aqua protection of the vehicle will make it safer and will significantly increase the service life of the device. Most of the elements of this two-wheeled vehicle can be protected by sealing them. If you do not want the first rain to damage your electric vehicle, waterproof your electric scooter.

Our masters

Kirill Valerievich Samsonov

Electrical technician. Experience in repairing electric scooters. 4 years. Carries out diagnostics, carries out the whole range of works for servicing.

Anton Valerievich Simyakov

Chief Specialist. Electrician-mechanic with 11 years of experience. Perfectly versed in any electronics.

Victor Sergeevich Kulieev

Technician. electronics engineer. A versatile specialist, well versed in the features of the mechanics of electric scooters and gyro scooters.

We work 7 days a week and are always glad to see you. If it is not convenient for you to come to the service center, use the services of our couriers. who will take the electric transport to us for repair and after its completion, will bring it to your home. The map shows our couriers on calls today (red, busy couriers, green free):