DIY tricycle with drawings

Required tools and materials

Before starting work, you must prepare the following materials:

Tools that may come in handy for the job:

How to make an adult tricycle yourself?

The use of a bicycle as a vehicle is popular in absolutely any city. However, in some cases, you can find a tricycle for an adult.

tricycle, drawings

Such a device can be made independently, while you just need to follow the recommendations of specialists.

Advantages of using a tricycle for adults

Most often, this type of transport is used for people of age or for those who cannot normally maintain their balance while driving.

The tricycle has the following advantages:

  • this type of device is suitable for absolutely any person, regardless of age;
  • the cost of the device is affordable;
  • each person will be able to independently make this type of device, while there is no need to spend a large amount of money and have special skills;
  • the bike is stable while riding, regardless of the type of road;
  • can be used for the carriage of goods;
  • considered safer than a two-wheeled device;
  • low frame is suitable for people of different ages.

Preparation

Before starting the installation of the three-wheeled device, it is necessary to make all the drawings and calculations.

Particular attention is paid to the following elements:

  • stability, it is necessary to correctly calculate the location of the rear wheels;
  • the height of the steering wheel and seat is calculated individually for each person, depending on the height;
  • purchase a rear axle with a differential, which will not only be responsible for comfort during movement, but also, on the advice of specialists, is necessary for bladeless driving;
  • calculate steering features, the device should not fall to one side when cornering.

How to make a tricycle for adults with your own hands?

In order to make a tricycle yourself, you need to decide on the type of device, as well as what the product will be used for.

  • If it is a cargo bike, models with a large front rack should be preferred.
  • For cycling enthusiasts, a classic bike with two wheels in the back and a passenger seat in the back is suitable.

Step-by-step instruction

For the manufacture of a three-wheeled vehicle for adults, the following steps must be taken:

  • set the old bike on the support with the handlebars down;
  • remove the wheels;
  • check and eliminate possible damage and rust;
  • using an angle grinder, you need to remove the back of the bike;
  • using metal clamps, it is necessary to attach the differential;
  • secure the bridge with clamps. When looking at the frame, the bridge should be at a 90 degree angle, any deviations can lead to discomfort during movement and a short service life of the device;
  • fix the constituent components using a welding machine;
  • mount fenders on the rear axle that can be used from an old bike;
  • weld a basket between the wings, the size of which depends on the size of the bike;
  • install two wheels on the rear axle and check their parallelism;
  • install the front wheel and, if necessary, the wing;
  • place the bike on a level surface and, using a level, check the correct position of the handlebars and rear axle to the frame;
  • the places tightened with clamps must be tightened;
  • using two bicycle chains, you need to connect and make one long;
  • install the chain by removing unnecessary links by grinding;
  • install the brakes, the most optimal solution is the choice of disc brakes. The brake lever is mounted on the steering wheel;
  • install a gearshift mechanism, the shift lever is mounted on the steering wheel;
  • check the quality of the assembled parts, if necessary, additionally process the joints with a welding machine;
  • cover the device with paint.

Many users prefer to have a small basket in front to store the bag, this allows them to free their hands while riding.

Advantages of using a tricycle for adults

Most often, this type of transport is used for people of age or for those who cannot normally maintain their balance while driving.

DIY Recumbent trike

The tricycle has the following advantages:

  • this type of device is suitable for absolutely any person, regardless of age;
  • the cost of the device is affordable;
  • each person will be able to independently make this type of device, while there is no need to spend a large amount of money and have special skills;
  • the bike is stable while riding, regardless of the type of road;
  • can be used for the carriage of goods;
  • considered safer than a two-wheeled device;
  • low frame is suitable for people of different ages.

Preparation

Before starting the installation of the three-wheeled device, it is necessary to make all the drawings and calculations.

READ  What Age Tricycle

Particular attention is paid to the following elements:

  • stability, it is necessary to correctly calculate the location of the rear wheels;
  • the height of the steering wheel and seat is calculated individually for each person, depending on the height;
  • purchase a rear axle with a differential, which will not only be responsible for comfort during movement, but also, on the advice of specialists, is necessary for bladeless driving;
  • calculate steering features, the device should not fall to one side when cornering.

How to make a tricycle for adults with your own hands?

In order to make a tricycle yourself, you need to decide on the type of device, as well as what the product will be used for.

Homemade Scrap Trike, Part 1: The Layout/Plans/Shopping List

  • If it is a cargo bike, models with a large front rack should be preferred.
  • For cycling enthusiasts, a classic bike with two wheels in the back and a passenger seat in the back is suitable.

How to make an adult tricycle yourself?

The use of a bicycle as a vehicle is popular in absolutely any city. However, in some cases, you can find a tricycle for an adult.

Such a device can be made independently, while you just need to follow the recommendations of specialists.

How to make a tricycle for adults with your own hands?

In order to make a tricycle yourself, you need to decide on the type of device, as well as what the product will be used for.

  • If it is a cargo bike, models with a large front rack should be preferred.
  • For cycling enthusiasts, a classic bike with two wheels in the back and a passenger seat in the back is suitable.

Advantages of using a tricycle for adults

Most often, this type of transport is used for people of age or for those who cannot normally maintain their balance while driving.

The tricycle has the following advantages:

  • this type of device is suitable for absolutely any person, regardless of age;
  • the cost of the device is affordable;
  • each person will be able to independently make this type of device, while there is no need to spend a large amount of money and have special skills;
  • the bike is stable while riding, regardless of the type of road;
  • can be used for the carriage of goods;
  • considered safer than a two-wheeled device;
  • low frame is suitable for people of different ages.

Required tools and materials

Before starting work, you must prepare the following materials:

Tools that may come in handy for the job:

How to make an adult tricycle yourself?

The use of a bicycle as a vehicle is popular in absolutely any city. However, in some cases, you can find a tricycle for an adult.

Such a device can be made independently, while you just need to follow the recommendations of specialists.

Preparation

Before starting the installation of the three-wheeled device, it is necessary to make all the drawings and calculations.

Particular attention is paid to the following elements:

  • stability, it is necessary to correctly calculate the location of the rear wheels;
  • the height of the steering wheel and seat is calculated individually for each person, depending on the height;
  • purchase a rear axle with a differential, which will not only be responsible for comfort during movement, but also, on the advice of specialists, is necessary for bladeless driving;
  • calculate steering features, the device should not fall to one side when cornering.

Step-by-step instruction

For the manufacture of a three-wheeled vehicle for adults, the following steps must be taken:

How to Build a DIY Cargo Bike (Plans available!)

  • set the old bike on the support with the handlebars down;
  • remove the wheels;
  • check and eliminate possible damage and rust;
  • using an angle grinder, you need to remove the back of the bike;
  • using metal clamps, it is necessary to attach the differential;
  • secure the bridge with clamps. When looking at the frame, the bridge should be at a 90 degree angle, any deviations can lead to discomfort during movement and a short service life of the device;
  • fix the constituent components using a welding machine;
  • mount fenders on the rear axle that can be used from an old bike;
  • weld a basket between the wings, the size of which depends on the size of the bike;
  • install two wheels on the rear axle and check their parallelism;
  • install the front wheel and, if necessary, the wing;
  • place the bike on a flat surface and, using a level, check the correct position of the handlebars and rear axle to the frame;
  • the places tightened with clamps must be tightened;
  • using two bicycle chains, you need to connect and make one long;
  • install the chain by removing unnecessary links by grinding;
  • install the brakes, the most optimal solution is the choice of disc brakes. The brake lever is mounted on the steering wheel;
  • install a gearshift mechanism, the shift lever is mounted on the steering wheel;
  • check the quality of the assembled parts, if necessary, additionally process the joints with a welding machine;
  • cover the device with paint.
READ  How To Measure A Bicycle Wheel In Inches

Many users prefer to have a small basket in front to store the bag, this allows them to free their hands while riding.

DIY tricycle

The width of the frame in a homemade tricycle cargo bike should not exceed 50 cm.Otherwise, the bike will need to be registered with the traffic police.

Factory bridge installation

Great if your cargo bike comes with a factory differential, then the assembly won’t be a problem at all. All that is needed is to remove all rear parts (brakes, chain, trunk, etc.).

  • A differential (eg UK6S) is fitted to the factory seat of the rear wheel. The bridge stops are brought to the rear of the frame, and the axle is installed in the lugs and tightened well.
  • After mounting the rear axle, be sure to align it at right angles to the frame. The rear axle must be parallel to the front.
  • Now we need a chain. It will be much longer than standard models. To do this, we buy two chains and adjust them to the length we need.
  • It remains now to adjust the gear selector.
  • Disc brakes are installed on the rear axle. Congratulations! Your homemade cargo tricycle is ready for use.

The design of the trolley, its height, canopy, mesh sides are limited only by your imagination. There are many models with removable tops to make the trolley even more functional. Such three-wheeled home-made products in the “vintage” style can often be found in cafes and restaurants.

Measurements and miscalculations

A drawing with calculations for the design of a cargo bike

First you need to calculate the details and take measurements that will be needed for the design.

  • A prerequisite is sustainability. The bike should not fall, roll over to one side during sharp turns of the steering wheel.
  • The height of the bike and seat should be calculated in such a way that it is comfortable for you to get on and off.
  • Pedals and wheels are better to buy high quality and new. Be sure to take care of the bell and brakes.
  • Everything should work quietly and smoothly. Squeaks are highly undesirable, you need to think about high-quality lubrication of parts at the first stage.
  • Reinforce the frame. Reinforce the metal frame of the frame with the help of reinforcement and profiles, as the load on it will increase significantly.

To make a cargo tricycle with our own hands, we need an old bicycle, a metal profile, a pair of wheels and, if desired, a differential. We cut the fork slightly below the seat (20 centimeters) and weld on a pre-made frame made of metal profiles. We remember the permissible width, so that later you do not have problems with the traffic police.

We fasten the wheels with an axle, put an asterisk in the center of the axle.

So what are they

If you want to assemble a cargo tricycle with your own hands, then let’s figure out what they are. So, our mini-trucks are of two types:

  • one wheel at the back, load frame on two front wheels;
  • two wheels with a load frame at the back and the steering section and seat at the front.

And also, when designing your homemade transport, you should consider the type of bridge. At the moment, engineers and progress have pleased us with 3 types:

  • Solid axle. The most budgetary and not the easiest cargo bike to operate. Creates inconvenience when cornering, because the wheels enter there with different turning radii, and, accordingly, at different speeds.
  • Driving axle shaft. This option is already quite good, although it has its drawbacks, since with effort or acceleration, the drive axle of your bike will push it in the opposite direction, creating inconvenience when driving. Also, this type of bridge can create discomfort when pedaling. Extra effort is required on tight bends.
  • Differential axle. The best, but also the most expensive option. When equipped with such a bridge, the force is distributed evenly. You can choose an axle with a differential for any wheel diameter. The main thing is to immediately decide in what conditions your homemade product will be used, and choose the optimal wheel diameter.

To the delight of all lovers of a homemade cargo bike, there are ready-made axles with a differential, for example, the rear UK6S, which includes the differential itself, a Shimano derailleur and 6 sprockets.

DIY cargo bike construction

Has anyone met a cargo tricycle? This is an unusually functional and convenient form of transport that is suitable for a wide variety of occasions. For example, it is indispensable for summer residents, it will become a faithful helper for people living in the village, and you can also transport children on it. over, such a bike is very beneficial for health: it strengthens muscles, increases endurance, and has beneficial loads on the heart.

READ  How to teach a child to ride a tricycle

Adult tricycle for transporting cargo

And most importantly! This type of transport will pass on any off-road and get to the most distant summer cottage. Well, SUV drivers. envy.

There are some more pleasant moments: straight arms and imagination can turn this seemingly ordinary thing into a real work of art.

Tricycle or tricycle

Of course, the tricycle moves faster, but pay attention to the many advantages of the first and the disadvantages of the second.

A cargo bike, like any other bike, is quiet, does not create unnecessary noise, environmentally friendly and very healthy. And also good news for everyone who was going and is going to lose weight by the spring. A cargo tricycle or regular bicycle burns 500 kilocalories per hour. Great, isn’t it? Especially with a daily intake of 1500-1700 kcal in an adult.

And most importantly, you made your own homemade three-wheeled truck with your own hands, and this is the main reward and pleasure to use.

Too small living space for storing transport for cycling at home is not a reason to deny yourself pleasant hobbies. over, the issue of storing a bike has already been solved by craftsmen, who offer their own options for how to make a stand for a bike under the rear wheel with their own hands.

How to make a headlight for a bicycle yourself? How to choose the right LED for your flashlight? The parts you need, how to assemble and mount on the bike.

How to decide on the choice of battery for an e-bike. What are the characteristics of different types of batteries. How to assemble a battery with your own hands.

Do-it-yourself tricycle, cargo bike

Earlier we have already described how to make a velomobile with our own hands, today we will talk about an adult tricycle cargo bike, an indispensable assistant on a personal plot.

You can assemble such a truck on three wheels with your own hands, if you dream a little and find the necessary parts. Actually, to assemble such a cargo bike, you will need an old bike, and useful junk that can be easily found in your garage.

Some tools are required to assemble the cargo bike. You cannot do without a conventional angle grinder and electric welding. After a short work, you will get a fairly practical tool, very simple in further operation and repair. On private property, such an assistant will be indispensable.

The load capacity of the bike will be approximately 125 kilograms. That is, a bicycle can transport 5 bags weighing 25 kg. Actually, the carrying capacity can be greater, since the body is made with a large margin of safety.

The size of the bike body was designed to be spacious to accommodate bulky loads. Thanks to the spaciousness of the body, you can easily use it in construction to transport all kinds of materials and tools. It can also be used as a mobile stepladder, very much in demand at a construction site.

Bicycle drive chain, with an intermediate shaft, closed to the rear wheel (see photo). The bike is propelled by conventional pedals.

The brakes on an adult cargo bike work in the same way as on an old bike. As practice has shown, you can completely leave the stock brakes and not try to invent new ones.

The bike is easy to upgrade and increase its carrying capacity by installing the best wheels.

The body of a cargo bike is quite durable, because profile pipes were used for its assembly, therefore, damage to the body is excluded.

The main components of the bicycle, which are responsible for its operation, are not altered, therefore it is not difficult to maintain them in the future.

In the course of further operation, you can take care of the installation of shock absorbers, a speed switch and strengthen the brakes by making manual ones on the front wheel (see video).

The weight of the cargo bike is quite impressive, about 35 kilograms. The body, mounted from pipes, significantly adds mass to the bicycle, but otherwise, when a person gets used to its features, the weight of the bicycle will not be noticeable.