Practical advice when choosing a combination lock
Pay attention to the features listed below.
- We immediately look at the value and brand name. It is better to dismiss the Chinese counterfeit immediately as unreliable
- We check the thickness of the metal element and its quality. The larger the volume, the better. Hardened steel is ideal.
- Structurally, the model must have a large number of combinations and not click when selecting a code.
- It is better to purchase two locks of different models at once. You shouldn’t spare money. the bike is more expensive.
- Be sure to check the functionality of the lock several times before using it.
By using these tips, you will significantly increase your chances of remaining the owner of your bike.
Adjustment and repair of the coded lock
Usually, after purchasing a lock, the buyer finds a standard code set of numbers on it. It can be expressed in four identical numbers. All this is reflected in the instructions for the product.
In order not to think about how to break a bicycle combination lock, you need to immediately change the combination on it. Your best bet is to write in numbers that you can’t forget. For example, the birthday of a beloved dog. As a rule, thieves, starting the process of theft, choose exactly the factory combinations. And a person who is too lazy to devote time to changing the code loses his precious property.
Let’s look at the step-by-step steps for replacing the code.
- Using the old version of the numbers, open the lock.
- At the end of the lock, near the location of the code, you need to find the ring and change its direction towards the marked arrow. We perform the action until it stops.
- We change the combination to a suitable one.
- It is strictly placed opposite the mark.
- The new code must be memorized or written down.
- The ring returns to its original place.
- We close the product and use the result.
The whole procedure will take a minimum of time. And the benefits of this action. on the price of your bike.
How reliable is a combination bike lock?
Inexpensive modifications of combination locks are quite popular not only among cyclists, but also in other areas. However, it is worth noting that they do not have a high degree of reliability, because information on how to open a bicycle lock is quite easy to get. It is enough for a bicycle thief to enter one number correctly and determine its correctness with a quiet click. Then you can act according to the situation with time.
Therefore, the selection of a combination lock should not be based on cheapness, but on its quality characteristics.
Consider the main pros and cons of various options for bicycle locks, which can be an alternative to a code.
- Security devices designed to grip the wheel with the frame can be quite reliable. But if a thief really likes your bike, then he can take your entire bike and load it for theft, for example, in the trunk of a car. Of course, it makes sense to take this risk, it only makes sense if the price of a bike is very expensive.
- Plate lock. The main advantage is the budget of the purchase. The plates are easily cut by various locksmith tools. For example, metal scissors.
- Rope options. Very handy and compact. But the thief copes with it, as in the previous version.
- The most reliable product is considered to be a chain lock, which is made of steel of a special type of hardening. It is impossible to saw through. The disadvantage is the decent weight of such a chain.
- U-shaped locking device. Perfect for a cyclist by all criteria. Minus. small girth distance. It can only be fastened in a designated bicycle parking.
How to open the combination lock on a bicycle
Any cyclist values his iron brainchild very much. Therefore, the question of the safety of a bicycle in the absence of its owner often becomes a priority. In any city it is impossible to see a bicycle, abandoned on the street, not fastened, by any kind of castle. After all, a bicycle costs really decent money and its theft is always a loss of valuable property.
What locks are most often used to provide protection against theft? What to do if such a lock is broken and the bike is fastened? How to open a bicycle lock if you forgot its code? Let’s analyze all such questions and options for their solutions. We will pay special attention to actions aimed at opening the lock in case of violation of its functionality for various reasons.
How To Reset Your Cheap A Combination Bike Lock (Inay, Thank You! Test Episode#1)
How to open the combination lock of a bicycle in case the code is forgotten
The information provided should be used directly to get out of an extreme situation. We emphasize that the offenses committed during its use will entail serious punitive measures.
Bicycle combination lock how to open. Algorithm of actions.
- We preset all numbers to one level. for example, four units.
- Both ends of the product are pulled in different directions. The goal is to find a small distance when selecting suitable numbers that are located next to.
- We repeat the tensioning process until there is a distance between all indicators.
- Correct combination and problem solved.
Of course, such actions can be carried out if the lock is not closed on a bicycle. Otherwise, if you do not want to damage the lock, the bike must be evacuated home, where the above steps must be taken.
Another option for opening a combination lock
Bicycle locks, Cyclotech how to open? The following option is presented for a specific type of lock.
What is Cyclotech Castle? Inexpensive security device, which can fail or the owner forgets the password.
How to reset 5-digit code Bike Lock (Tonyon Bike Lock Cable) | Inyi Yruma
We’ll have to work on putting it back into service. The main thing in this procedure is not knowledge, but patience.
- In the initial toggle switch, set any number.
- The part that does not move is marked with a special mark. Any number goes through it three times before it goes to a new level.
- At all levels, you need to go through this mark, until you select the correct combination.
- The third level involves the implementation of rotation in the opposite direction from the clockwise.
If you are patient and have time, then you can solve such problems and keep the purchased protective device.
How to set up a combination padlock on a suitcase
Manufacturers do not stand still and come up with the most advanced, reliable and modern protective mechanisms. Don’t laugh when you see a device with a bow. It cannot be hacked if you do not know the combination. The thief can only use a file, and this takes a lot of time, since such locks are made of high-strength alloy. Some manufacturers create such locking devices with an individual code. There are many models on the market where the secret numbers can be changed.
- For better visibility, place the travel accessory on the table.
- Take the product in your hands.
- Rotate the bow to the opposite end and press. There should be a click. There are options when, on an open device, you need to use a special button, while holding which, transcoding is possible.
- Enter your individual code using the wheels from top to bottom.
- Return the arc to its original position.
Type in an invented combination
Begin the operation from the cell on which there is a factory designation with a marker. So enter all three numbers in turn.
What are the varieties
What to do if the coding is incorrect
Most likely, you made one mistake and that’s why the lid won’t open. Try brute-force to correct the mistake. To do this, enter the two leading digits, and in the third window, insert values from zero to nine. Do this for each position. You only have to check thirty options. In extreme cases, there are no more than a thousand combinations in such constipation. With the right patience, you can do the job. Watch the video for tips on how to code a lock on a suitcase. If this does not help, then you will have to contact the master.
How to set, enter, reset and program the code on the suitcase lock
After you have verified the integrity of your travel bag, you need to deal with the encryption device. To do this, we perform simple actions.
We type a digital designation using the remaining wheels
Depending on the type of lock mechanism, you should either press the huge button, or pull the handle up and hold it in this state until you set all the values you need. Sometimes additional sharp things are needed for the action, for example: a pencil, a pen, a knitting needle.
Find a lever or reset button
They are located on the back of the combination lock. If they are not there, inspect the entire accessory. After all, manufacturers of travel bags often use accessories from various companies.