How to lubricate a bicycle chain
Apply light lubricant to each roller of the chain, then wipe dry the outside of the substance. In motion, part of the lubricant gets out in any case. In this case, use a stiff brush to clean the chains, sprockets and rollers. Choose an accessory with medium bristles. Special brushes are available for easy penetration of bristles into hard-to-reach areas.
How to clean a bicycle chain if it is in a running state, one brush may not be enough. Use a special transmission cleaner (grease solvent). Its formula is specially designed to quickly remove caked grease mixed with dirt.
Sometimes cleaning the chain is not enough to remove all the dirt, especially if the links are clogged with a mixture of grease, dirt, sand. In such situations, you need to know how to wash your bike chain. Use a chain cleaner with several brushes. such a device will greatly simplify the maintenance of the transmission.
How to lubricate a bike chain if it’s new
When assembling the chain at the factory, the manufacturer uses a very thick paste, the consumption of which is enough for 300-400 km of rides, after which the owner will have to cope with the task on his own. It is difficult to apply the same thick lubricant, so more liquid alternatives and sprays are used in everyday life.
After buying a bike, wipe off any traces of grease that have appeared on the outside before the first ride. Use a soft cloth. There is no need to remove grease inside the chain! A simple procedure does not take much time, but will avoid serious contamination and damage to the chain.
Why clean and lubricate your bike chain
The longevity and health of your bike is largely up to you. Even the most advanced transport cannot take care of itself and the owner’s task is to provide timely care for the most important parts of the iron horse. Do I need to clean the transmission? It is enough to look at the state of the chain, cassette, led system, the owner of which considers this process superfluous. Black spots, drips, a thick layer of an incomprehensible mass, which contains dust, dirt, sand, oil, plant elements and much more that cannot be recognized. In this favorable environment, steel gnaws multiply very quickly. bacteria that stimulate the appearance of corrosion and corrode the metal. When asked whether it is necessary to lubricate the bicycle chain, the answer is unequivocal. it is necessary, moreover, first it should be cleaned.
What can not be used to lubricate the bicycle chain
The main mistake of cyclists is the use of WD-40 grease and analogues. This aerosol is not a lubricant and has a completely different principle of operation. It is used to dissolve old grease (unblock too contaminated and acidified compounds). Use a chain cleaner, not a lubricant. The amount of oil in its composition is not enough to perform the necessary functions.
Engine oil will not be useful for the chain and the bike as a whole. This substance is designed for use in a closed atmosphere at elevated temperatures, which cannot be applied to a bicycle drivetrain.
There is no need to look for an alternative. the consumption of special bicycle chain oil is minimal. A small jar will last for many years. Why replace it with unsuitable alternatives?
Can I lubricate my bike chain with grease? No, just like lithol, sunflower oil and aromatic oils. Buy a product designed to work with bicycle parts.
How and what you can and should lubricate a bicycle chain
How to lubricate a bicycle chain so that the lubricant retains its properties for a long time and provides reliable protection for the part?
The quality of the lubricant directly affects not only the operation of the entire transmission system, but also its service life. To select a lubricant, it is important to understand exactly how this material differs from the substances used to process other parts.
In motion, the chain constantly rubs the rollers against the stars. Such friction does not lead to significant changes, but internal friction can cause more damage to the mechanism. The chain includes many links, each of which contains 4 elements. plates (2 pcs.), Pin, roller.
To determine the place that most requires processing, you need to understand which of the elements is subject to the most wear.
There is no friction between the pins and the outer plates. these elements are very tightly planted. The greatest friction occurs between the pins and the inner plates. The plates create grooves in the pin, which leads to its rapid wear. As a result, the rollers do not join the teeth of the stars, which leads to their wear. The rear derailleur rollers, which are most often made of plastic, are equally affected. This leads to a decrease in the coherence of gear shifting, the appearance of clicks, noise, chain slippage. What kind of oil is allowed to lubricate the bicycle chain in order to avoid unpleasant consequences?
For effective action, the lubricant must enter the interior of the system and be retained there. At the same time, the substance must have several more important properties:
- do not fly out in splashes when driving;
- do not wash off with water;
- do not dry out.
If you treat the outer part of the chain instead of the inner one, the effect will be exactly the opposite. the thick liquid will collect all the dust and dirt from the roads, further polluting the transmission. So, the rule for every cyclist is that the chain should be dry and clean on the outside and well-processed on the inside.
Chain care: features
The bike drivetrain should shine. There should be no dirt, excess grease on it. Any moisture will cause the rapid appearance of new contaminants. It is advisable to clean the transmission every 100 km in good weather. How often do I lubricate my bike chain? You do not need to do this every time you clean. Use a lubricant when the characteristic dry rustle appears.
Features of the choice of grease
Of all the parts of a bicycle drivetrain, only the chain needs lubrication. Do not lubricate the stars! What should be the lubricant? Easy to penetrate the rollers, do not leak, do not dissolve in water, do not dry for a long time. The grease should not be washed off in rain or other precipitation, when driving through puddles. As an analogue of bicycle oil, you can use a motorcycle lubricant. It will not spatter at high speeds, but it is more expensive and is sold in larger packs. Such a purchase is not always advisable.
All bicycle lubricants can be divided into 2 groups:
- For dry weather (Dry). Teflon-containing substance, has dustproof properties, protects the chain from moisture penetration. This grease is considered universal. Even if you get caught in the rain, upon arrival home, it is enough to clean the chain, wipe it, lubricate it, wipe it again.
- For high humidity conditions (Wet). It is made on the basis of synthetic oils, in some cases there is paraffin in the composition. The formula contains a large amount of silicone, due to which it perfectly protects against moisture, but is not suitable for use in dry conditions due to increased fat content. This option is the optimal solution to the question. how to lubricate the bicycle chain in winter and autumn.
There are also special formulas with additives on sale. For example, ceramics form a reinforced layer on the parts, which increases the strength and extends the service life of the chain.
Thickened formulas allow for factory lubrication effects. Such substances are initially fluid, easily penetrate into the inner parts of the chain, after which the solvent evaporates from them and the paste thickens. The main thing is to wipe off the remaining grease from the outside in time.
Bicycle grease is sold in different packages. Spray packaging is not the most convenient option. The aerosol is uneconomical, its consumption is increased, moreover, it is easy to spray grease on those parts of the transmission that do not need lubrication, as well as the rim, frame, spokes, brakes.
It is much more convenient to use a can or aerosol with a special tip. Grease can be applied to each roller without overshooting or requiring additional cleaning of the bike.
How often do you need to clean and lubricate your bike chain?
In general, how is it determined how dirty the chain has become? You don’t have to go far, just look at it. Lumps of earth on the surface of the links, an abrasive mixture of old oil and sand, smudges. these are all those signs that directly indicate that it is time to get to grips with the bicycle chain.
The outer side usually brings the state of the chain to clean water. However, this is not always a reliable indicator. For example, prolonged driving on dry dusty roads may not affect its appearance in any way, but from time to time there may be an unpleasant crackle.
The fact is that dirt sticks very well from the inside, in the spaces between the rollers. It is possible to see at once in what state the chain is possible only on ordinary singspeeds. On high-speed models, such dirt cleverly hides among a large number of stars. To have a complete idea of how much the transmission is running, you will have to turn the bike over.
Those who like to ride after rain or in slush (and there are many of them) will have to clean the chain almost after every ride. At a minimum, wipe and lubricate. When riding on dry roads, the grease lasts longer, but its useful properties are gradually reduced by sticking dust. The dirt accumulated over time begins to interfere with movement, and affects the stars.
Much depends not only on the conditions, but also on the riding style. A neat and measured ride will definitely outperform aggressive driving in terms of cleaning and lubrication intervals. So cyclists who like to push their two-wheelers to the limit will need to clean the bike chain more often.
On average, under standard conditions, you need to look into the transmission unit 1. 2 times a month. often if desired. You just need to remember that excessive lubrication will quickly contaminate the system.
Best chain clean ever !!
How and what to clean the bike chain?
The bicycle chain is, one might say, the main knot, thanks to which movement is possible in principle. The efficiency, ease and speed of skiing directly depend on its quality and condition. The main parameters of a serviceable chain are its degree of wear, setting and cleanliness.
It is important for both a beginner and an experienced cyclist to understand that mechanisms that are actively in contact with dust, water and dirt should be kept in more or less decent condition. Cleaning your bike chain is a must and inevitable process. It is carried out so that the entire transmission unit serves as long as possible, and the ride is comfortable.
How to clean a detachable chain
The chain lock is a convenient and practical thing in terms of maintenance, since you do not have to sweat next to the bike looking for dirt. A chain that is detached from the bike will clean better than a chain that is suspended from the frame. Washing options:
- soak in kerosene;
- intensive rinsing in a bottle with solvent;
- manual cleaning and washing with brushes.
The first method removes plaque from the outer surfaces of the links. With lumps stuck between the rollers, a simple soak does not work well. After it, you need to knock out the dirt from the internal cavities using a thin knitting needle or brush.
A more effective way is to rinse the chain in a container. For this you will need:
- capacious plastic bottle with a wide neck;
- solvent (kerosene or acetone);
- detergent (washing paste or dishwashing liquid);
- small amount of grease.
The dirty chain is put into a bottle, then filled with solvent. Close the lid and shake vigorously for 10 minutes. This is the main cleaning of adhering dirt.
Then, in the same way, flushing is done several times. The bottle with the chain is filled with water (in the same amount as the solvent), a little cleaning agent and a few drops of oil. Shake in the resulting solution for 5. 10 minutes. The procedure is repeated several times until the liquid inside the bottle is almost transparent. Carefully remove the chain from the bottle and wipe it dry with a clean cloth.
Moderately effective method. cleaning the chain by hand using coarse and fine brushes. This will also require:
- cleaning agent;
- a few clean rags;
- Straighten the chain carefully.
- Apply to a large brush and lather.
- Clean the outer surfaces of the links. We periodically wash the brush in a solvent.
- Pre-wipe with a cloth.
- With a fine foamed brush, go over the internal cavities. For deep cleaning, repeat several times, periodically lubricating with a little oil.
- Wipe the entire chain with a rag dipped in kerosene.
- Final wipe with a dry cloth.
You can wash the chain thoroughly by hand, but it will take longer. In order not to dilute excess dirt, you need to think in advance about where and on what to clean. For these purposes, a plastic pallet, for example, is well suited.
For a while, it must be left to air dry; in parallel, all the stars should also be washed. Apply lubricant after the chain is already on the bike.
Lazada Bicycle chain cleaner Review (Vlog #6)
Removing dirt with a chain wash
Can the chain links be cleaned without removing it from the bike? It is inconvenient and ineffective manually. But what about those who do not have a chain lock, but squeeze is not at hand? A chain washing machine was specially designed for these purposes.
The chain washer is a special machine with gears for engaging links and small brushes inside. The cavity is filled with a special solvent included in the kit. When pedaling, all the links pass through the chain wash. Advantages of using:
- no need to remove the chain from the bike;
- easy to put on and take off without deforming the links;
- you can clear the stars with multiple scrolling;
- absolutely clean hands.
The chain washer can effectively clean all dirt from the transmission much faster than hand washing it on the frame.
The downside that can push you away from buying a new bike cleaning machine is its cost. And below is a helpful video on cleaning and lubricating the chain:
Cleaning and washing your bike chain is one of the primary procedures in bike care. By adhering to simple principles when washing and repeating it periodically, the cyclist will not find himself in a situation where the bike does not want to ride normally at the most inopportune moment.
Bicycle chain cleaner
- Children’s bicycles
- Balance bikes from 1 year old
- Children’s bicycles 2-4 years old
- Children’s bicycles 4-6 years old
- Children’s bicycles 6-8 years old
- Children’s bicycles 8-13 years old
Park Tool Chain Cleaner features vs Cheaper Imitator Cleaner
Bicycle chain lubrication. an obligatory element of bicycle maintenance. A well-lubricated chain ensures excellent component performance and crisp shifting. But, before you lubricate the bicycle chain, it must be cleaned of the remnants of the past grease that was applied to it earlier and has already worked out its resource.
To clean the chain from grease, special substances are used, among which there can be both classic solvents and more modern reagents, the so-called degreasers. Degreasers (chain cleaners) remove the greasy film from the transmission elements, clean it of dirt and sand and make it as clean as possible for further lubrication of your bike chain. If you want to save your money, you can use claassic folk remedies. gasoline, kerosene, white spirit. These fluids can clean your chain quite well, but their main drawback is. aggressiveness to the environment and a pungent odor. Cleaning the chain with gasoline or kerosene brings dubious pleasure and many inconveniences associated with the environmental friendliness of this cleaning method.
Modern chain cleaners (such as those available from manufacturers such as Smoove, Muc Off, Finish Line, etc.) are less contaminated and less odor-free and in most cases are designed specifically for cleaning bicycle components. Usually, new generation degreasers have pleasant odors, low active liquid consumption and high cleaning efficiency. Of course, the cost will be higher than the cost of traditional cleaning methods, but the pleasure of the procedure and the effectiveness of the final result will be much higher.